I have code to extract each entry in an event log. If the entry is after a set date (the value of my startDate variable) then it gets the information from the log and outputs to an email (I can do all this, the bit I am stuck on is as follows) I am currently using the following code extract:
[Code]...
I've read thru Iceplug's tutorial on control arrays and got it working. I tried to add a new event by basically copying his click event code and calling it a doubleclick event. I used the proper addhandler and assigned the correct name to my sub. I have the click event changing the background color to blue and the doubleclick event changing the background color to green. The background color does not change to green. Why?
Heres the tutorial with my new code encased in asterisks ...
Code:
Imports System
Imports System.Windows.Forms
Public Class form1
[CODE]...
I need to Create Calender w/Very Basic Event Entry. Any suggestions on how I would go about this. I have seen some controls to do this, but I need to do this without buying anything.
View 1 RepliesIf I wanted a character in a datagridviewcolumn replaced when it's typed, not when the cell is left, how could I achieve that? Is there an eventhandler tied to that?
View 1 RepliesI am using VB.NET for Windows applications. What is the difference between Load event,Activate event and Enter event in the Form and in which order the above event is executed.
View 2 RepliesI'm trying to validate a few things in a form I'm building. It has a datagrid with clients info (taken from an access database) and a few textboxes where the user can type some search criteria. The thing is that those same textboxes are used to add new clients to the database and to modify a client's information if one from the datagrid is selected, so I made it that the buttons to insert and modify clients are disabled on load and thenevery time the text on a textbox changes ("TextChanged" event) they become enabled. So far so good. But then I wanted to make it so when a client from the datagrid is selected both buttons become disabled again until the text on a textbox changes (to make sure they're adding a different client and not the same one that was
selected).
I tried using the CellClick event from the datagrid to disable the buttons, but since every time a client is selected from the datagrid the info is shown on the textboxes, this triggers the TextChanged event too, and the buttons become available.So, is there a way I can tell the TextChanged event not to be triggered when the CellClick event occurs?
In VB6 we had a code inside textBox_MouseUp to call textBox_KeyUp(-1, 0) and the signature of KeyUp was
Private Sub textBox_KeyUp(ByRef KeyCode As Short, ByRef Shift As Short) Handles textBox.KeyUp
Now when I migrate to .NET I changed the KeyUp event to Private Sub textBox_KeyUp(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles textBox.KeyUp
How can I do this call textBox_KeyUp(-1,0) now from textBox_MouseUp event?
I have a DataGridView in a form. I want to control the entry of data in the columns with the event ChangeColumn for the associated DataTable.
View 4 RepliesI have created a simple framework for a Windows service in VB.NET Express 2008. It enables a timer which then writes to the event log every 6 seconds until the service is stopped. This works fine. I adapted that framework into something further. It is using Windows sockets. Well, I haven't finished that part yet and I just want it to write to the event log successfully but I can't even get it to do that now. I am trying to write an event in the OnStart event. The service is being started successfully, according to the standard event log, but my custom events are not getting there. I don't understand why as I am using the same code for that as I was before.
[Code]....
Say you've got a form, Form1, and you're in the Paint event. Is there a way to test to see if, say, the Resize event is occurring from within the Paint event?
View 9 Repliesis it allowed to use more than one Sub to handle the same event ? For example , may I have 2 separate subs to handle the Load event of a form ? Will they fight each other ?I have tested it and it seems to work fine , nevertheless I thought I'd ask you . In case you wonder , there is no great deal , I just want to copy the same lines of code in more forms so I am doing it just in favor of the looking aspect .
View 5 RepliesWhen i run the application i need to extract the information about the sequence of methods or classes the application touches when any event is performed on the application.
Is any there other tool other than profiler?
I am working on creating a web app that will query event logs on internal servers for events using a specific ID. Since most of the servers are running Windows Server 2003, I cannot use the preferred System.Diagnostics.Eventing.Reader method that I was hoping to use.
I've seen the mention of using WMI, but would like to avoid this if possible. I have dabbled with the System.Diagnostics class but cannot seem to get it working when running on a server. It is able, when testing locally, to query my event log, but displays nothing when put on the final server. There is no error that is displayed after the program is ran.
I have three tables set up in a MySQL database called "event", "status" and "user". (as shown below:
EVENT TABLE (below)
STATUS TABLE (below)
USER TABLE (below)
and when I get data from the event table I use the SQL query statement below to bind the persons first and last names together as one variable called "name" and then bind that name to the respective user_id; and so on. However when I make changes to the event table it doesn't show the changes I've made. I'm certain it has something to do with the way I'm retrieving the data.
SELECT CONCAT(u.lastname, ', ', u.firstname) AS Name
, s.message AS Message
, DATE_FORMAT(e.timestamp,'%b %d %Y - %r') AS DateTime[code].....
I'm checking if the application needs to update before the user starts the software. But, they have to enter a few items of data and then press enter. When they do, if an update is available, the application closes, my update app runs and then the new version is opened. I want to just update when the application is loading, so they don't have to waste time entering data if the application is just going to close anyway. But when I run the block of code to check for updates, I get an SqlException.
[Code]...
The event handlers in my parent class are never called though the events are raised in the child class.
The Code:
Public Class childForm
Public Event checkboxchangedEvent(ByVal checkbox1 As Boolean, ByVal checkbox2 As Boolean)
Private Sub checkboxchanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged, CheckBox2.CheckedChanged
[code]....
I'm trying to complete this airline reservation application, but having a problem in this part of the question:Creat an event handler for the FlightBindingSource's PositionChanged event: select FlightBindingSource in the class Name combobox then select position changed in method name combobox to creat the FlightBindingSource's PositionChanged event handler. Write a code to access the currently displayed flight object and pass its flightNumber to method DisplayPassengers as a decimal.This Is my code so far:
HTML
Public Class AirlineReservationForm
Private database As New ReservationsDataClassesDataContext()
Private Sub FillAll()[code].....
Eg. ""vb.net" timer event trigger on purpose". This application is meant to run at all times to download a web page every minute. To avoid freezing the UI, I read that the best solution is to move the code from a While/Sleep loop to a Timer that will be triggered every minute. The problem I have, is that the user must wait for a minute before the event is triggered:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Timer1.Interval = 60000
Timer1.Enabled = True
[CODE]...
Is it possible to force this event to occur instead of waiting for it?
I'm trying to execute different code depending on the button clicked (button 4 or 5) on Form1, but when I click on button5 to activitae the code on the Form2's Load event everything is Ok, but when I click the back button to return to Form 1 and click on the Button4 to activate the code on the Form2's Load event again, it doesn't active the Form's Load event, is there a way to form the form load event every time I access it from Form1? [code]
View 7 RepliesStarting from my understanding about Background worker control, I understands that the background worker runs the code in its "DoWork" method in a seperate thread, while ProgressChanged and RunWorkerCompleted events are executed on the main thread.In my senerio, I report the progress and under an specail condition my application displays a message box to the user in "ProgressChanged" method using MessageBox.Show(). and in "Run Worker Completed" event the application finalize some work. There the sequence is important, suppose that the message is of Yes or No type and finalization depends on it. Now when i run my application, the background worker triggers "ProgressChanged", but as soon as backgroundWorker's cancelAsync() is called the program leaves the current "ProgressChanged" method and executes "RunWorkerCompleted" code first.How can i make sure that the "Run Worker Completed" code executes only after the completion of ProgressChanged method.
View 9 RepliesProgramming language is vb.net
View 1 RepliesAs you noticed, in the code bellow, the event argument for the form click event has the type "TimedEventArgument".When the event is raised, e.Time holds the time where the form was clicked.Add the missing code in the class Form1 to make this work.You will not change anything to the methods "Form1_Click" or "Form1.Load".You will not use Option Strict On. HOWEVER, you will not do any narrowing or late binding that wouldn't have been allowed if Option Strict was on.You cannot create any new Class, Structure or Module.You cannot cast the EventArgs to TimedEventArg in any way
[code]...
Below I create an array of labels. I would like to add an click event to my labels. Can someone point me in a direction?
[Code]...
I am making a function of an application that when a function is called the application will close all processes that are owned by the user and were started after a specific point. My thoughts on this would be to trigger an event in my application every time a process is started and ended, and only if the processes is owned by the user, the event should get information (e.g. the process ID, name, etc) about that process and add or remove that information to/from an array depending on if the process starts or ends. Then when a function is called end all the processes in that array.
[Code]...
I have a Visual Basic Program that, when I enter data into a textbox, uses LEAVE events to update it. However, it will not update until I go to another textbox or press a button or other similar control.This also happens when using the LOST FOCUS event.How can I make the textbox update (be it doing a financial recalculation or some other custom function) happen when the user clicks/tabs out of the textbox and NOT having to click on a button or into another textbox?Do you recommend having a separate button for performing the custom functions?
View 6 RepliesCan i Know how to catch between these 2 event, Leave and Click?
I have one checking in a textbox Leave event. I will go check whether this ID is already exist in DB or not. If exist, I will prompt MSG box to user.
When I click on Close button while focus is on textbox, this textbox Leave Event will trigger first before Button Click event.
So, the form remains open without trigger Button Click event.
how to prevent this textbox leave event or how can i catch/control this situation?
what is the error in the bleow: 'Public Event OnFilterAdded()' is an event, and cannot be called directly. Use a 'RaiseEvent' statement to raise an event. Note: the error line is italic underline
Imports System
Imports System.Collections
Imports System.Configuration
[Code].....
I just want to know if there any equivalent event (ADO. NET VS 2008) event as in MS ACCESS Form's OnCurrent Event.
The reason is I like to make some calculations based on some data bound controls with current datarow data when user clicked a row in DataGridView (or by using bindingNavigator). I've tried with DatagridView's RowEnter event. But some Data bound controls are not yet reflect the data of current datarow when that evet was fired.
In MSDN Help File: It says "RowEnter Event: Occurs when a row receives input focus but before it becomes the current row. "
I have alot of experience in working in VBA for excel, but not so much experience in creating my own structures so it's all still a bit foggy. I'm trying to capture the event for when the F1 key is pressed, not just when the form is active, but anytime the program is running. The code below expressing the handling is automatically generated for me in VB Express... But I'd like to change the situation to encompass anytime the program is open. I guess I have to reference events that happen in windows in general, but i don't know how to do it. I think i have to create the even in a class module?
[Code]...
When I utilize AddHandler in VB to add my own method to the Click event :
AddHandler Button.Click, AddressOf myButton_Click
I see that my code executes last - after other event handlers for the Button_Click event. Is there a way to insert my event handler in front of other events so that it executes first?