I have a master/detail scenario and I add this foreignkey contsraint to my datarelation in my dataset.
Dim foreignKey As ForeignKeyConstraint = _
relation.ChildKeyConstraint
foreignKey.DeleteRule = Rule.Cascade
[code].....
I have datagridview1 binded to data Table1 (with binding source) . This data table1 is in relation with his child data table2.When I insert new record to table1 I want to refresh datagridview1.
If I use table adapter fill method I get error.TableAdapter1.Fill(Me.DataSet1.Table1) ' error error: Cannot clear table Table1 because ForeignKeyConstraint FK_Table1Table2 enforces constraints and there are child rows in Table2.
I'm calling the following method from a button click event to export a datatable to excel. After the export is completed, the excel application object is quit, released and assigned to nothing. But in reality it's not getting released and stays active unless the entire application is closed. So every time the button is clicked for export, a new excel application object keeps on running. The problem doesn't occur if two of the lines from the method below are not used. But I can't omit them as they are really needed. Check the * marked lines.
Code:
''' <summary>
''' Exports data from a datatable to excel.
''' </summary>
[code]....
How to change the frame rate in Visual Basic 2008 Media Player? I have error: System.NullReferenceException was unhandled Message: Object reference not set to an instance of an object. IS there any way to fix this? Here's My Code
[Code]...
Where in Visual Basic 2008 Express Edition Software program do you specify a specific installation directory for a program?
c:Program Filesfinished program
I want to publish my program to try it out on another system and I want to ensure its installed in the directory structure I want.
i'm running Visual Basic 2008 Express Edition (latest service pack ... 9.0.30729.1 SP) on XP Pro SP3 with .Net Framework version 3.5 SP1 I have a rather large project I've imported from Visual Studio 2003 (Standard).The project compiles and runs just fine ... my compiled program itself never crashes.
But while I actually have the code up in the IDE, and simply adding/deleting code the whole IDE will randomly crash (usually without warning) and I loose my changes since last save.If/when I do get some hint of why it crashed, I get a window about illegal whitespace or something.... but that's rare ... usually it just crashes without warning and the whole IDE completely shuts down instantly. just deleting/adding a character is enough to trigger it maybe once every 30 minutes.
This is on a computer that is otherwise very rock solid .... no other program ever crashes, etc.
Is it possible to edit the Windows Form Designer generated code in VS2008?
View 4 RepliesMy some problem for vs 2008 in mobile applications How to learn mobile device board serial number in vb 2008?
View 2 Repliesthis event works ok, but the problem is that I don't know what field was clicked. Should I use objectinfo or something else? VB.net won't recognize for example e.objectinfo.
View 1 RepliesHow can I display column contents of a MS SQL Database on Text Box using VB 2008
View 2 Repliesproblem use Visual Studio 2005,2008 with Microsoft SQL Server 2008 R2 , when open vb.net choose : add new data source and choose database and add connection when choose Microsoft SQL Server (SqlClient) show error this version not supported
View 2 RepliesWhat i need to write is i get different signal from PIC16F877A and through serial port, i need to display diffrent text from different signal, Such as: Signal from portB.1 display 1, signal from portb.2 display 2. Between the microcontroller and serial port im using MAX232.
View 2 RepliesUsing VS2008 as frontend and MS SOL Server2008 as backend... a database is created in MS SQL Server2008(SQLEXPRESS). Now the problem is i am not being able to to load the database created in MS SQL Server2008(SQLEXPRESS) onto VS.Net 2008...
View 32 RepliesI use the 'Process' object to run EXE from my application. It works fine when it run on Windows XP and 2003. When it run on Windows server 2008, it hangs up: the process is stayed in background but never returns. It never goes ahead for the next commands. What could be the reason? [Code]
View 6 RepliesI use the 'Process' object to run EXE from my application. It works fine when it run on Windows XP and 2003. When it run on Windows server 2008, it hangs up: the process is stayed in background but never returns. It never goes ahead for the next commands
View 2 RepliesHaving problem in updating an existing record. An error occurs "Data Type Mismatch in Criteria Expression"
Private Sub ToolStripButton1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ToolStripButton1.Click
Dim myBuilder As OleDb.OleDbCommandBuilder = New OleDb.OleDbCommandBuilder(dataAdapter)
[code].....
Is there a way to validate a groupbox with a couple radiobuttons in it to make sure that one of the radiobuttons is selected?
Heres why I need this. I need a user to be able to select their class rank out by way of radiobuttons in a groupbox. When they click submit, I need to validate that atleast one of the radiobuttons got selected and if not display a messagebox.
I got one reply early of:
If myGroupBox.Controls.OfType(Of RadioButton).Count(Function(rb) rb.Checked) = 0 Then
'There is no RadioButton checked in myGroupBox.
End If
Is there any other ways other then that? Preferrably a more 'dumbed' down way? This is for just an entry level VB class, I would prefer not to use something of that nature if there is another way.
I am running a program that is connected through the internet and i gets disconnected at times.wanted to know how this would be to examine a color of a pixel , If the colour turns changes, my mouse will move to reconnect
View 8 RepliesI get the message "Please wait while Windows configures Microsoft Visual Studio 2008..." whenever I build the install project for my application. It configures VS for a while, then builds the project. This does not happen when I build the vb.net application itself, only the installation project in the same solution. This occurs on applications using the Leadtools library, but not others.
View 1 RepliesI have been working on an app that was basically a vb6 app but had to be changed and I did it all using VB 2008. works well, great. One of the problems that I had was to work on different groupboxes or frames. Since they are layered on top of each other, working on one frame would mess up the others. Eventually it all went okay. but now if i want to add another item in the menu and hence add another groupbox (or frame) in the same app - it would definitely be a nightmare.
[Code]....
I recently created a very simple project in VB express 2008 to interface with a COM object from an external vendor. I then downloaded the VS2008 90 day trial and found that the identical code in a VS2008 project results in a COMException error "Object is out of scope". Is anyone aware of any differences in how the two packages handle COM object interfaces as I have run out of ideas. Both projects have identical code and all the references are the same. The CreateObject() method correctly creates the object, but any attempt to access methods inside the COM object result in that error. I can even open the VB 2008 Express project inside VS and it still generates the same error.
Here is the code - the vendor dll in question is from Siebel v8.0.0, you'll notice that I have commented out most of the code that comes after the error. Creating a watch in the debugger on the siebApp variable sees it correctly created as {System.__ComObject}type SiebelHTMLApplication. I first tried this by creating the Property Service for variable siebSvcs, but after I started experiencing the COMExceptions, I reverted to using the most basic method inside the COM object I was creating.
Imports
SIEBELHTMLLib
Public
[code]......
using Vb Net 2008 with SQL Express 2008 R2 in windows forms. that being said, I have a syntax problem in this form, form has 2 texbox an a datagridview and also the 4 components DataSet. BindingSource. TableAdapter, BindingNavigator. When I filter by LastName no problem it work fine (it's a String) but when I try to filter by CustomerID (it's alphanumeric) I get an error "Invalid character" here is part of my code: Private Sub surnameFilterTextBox_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles surnameFilterTextBox.TextChanged
[Code]...
I recently installed vb express 2008 and with that download i also installed Sql server 2008. Earlier i have been working in MS Access so i have no experience in SQL server. My first problem is how to start sql server. I can see only following:
Start>All Programmes>MS SQL server 2008>Configuration Tools, Import and Export Data(32 bit)>SQL server configuration Manager,SQL server Error and Usage Reporting,SQL server Installation Centre. Moreover in Programme Files i have two folders:
1. MS SQL SERVER and
2. MS SQL SERVER COMPACT EDITION
how to start to create a database in SQL server with Vb express 2008.
after that, I try to add crystal report 2008 component to VB.net .By right click on toolbox choose items and checked crystal report viewerIt doesn't seem works, there is no crystal report 2008 component on toolbox
View 17 Repliesregistration code for vb 2008 express edition.
View 2 RepliesI have this code, to read image (saved as varbinary(max) in database):
Private Sub ReadImage()
Dim connection As New SqlConnection(strConnectionString)
Dim command As New SqlCommand("SELECT [Image] FROM z1 WHERE x=1 AND y=1", connection)
[code]....
But it isn't very convenient code. It reads bytes from table, save them to file, and finally open file as image.How can I read it directly to image, without saving as file?
I Am trying to connect to the database(in Sql Server 2008) through my vb.net desktop application, perform a backup, and then allow the user to save the backup file to their computer Using Save Dialog box in vb.net 2008.
View 1 Repliesi m developing a window application using vb.net & ms sql server 2008. The date is by default mm/dd/yyyy. But i wanna change this to dd/mm/yyyy. How is it possible and where do i hv to make changes?
View 3 RepliesI am using VB 2008 express and SQL Server 2008 express on a test basis and I used to connect VB express to a SQL database (created in SQL Server 2008 Express management studio) file and it work perfectly until my hard drive packed up and I had to get a new one, so I had to reinstall both of these again and copied my old databases from a backup I had. Now when I try to connect to the database file it cannot connect. Network related error or the instance name is incorrect. When I look at the advanced options in the connect dialog it shows my instance as .SQLExpress and my correct instance name is .SQL2008Express. I clicked OK on the connect dialog and manually changed my connection string to the correct instance and that worked but whenever I run the application in debug mode it give me the same error as above.
View 1 RepliesWithin my application we store objects i.e images,word docs, etc etc. These are stored in a listview and when the user double clicks the item it launches the default application assigned to the file type i.e a bmp will launch paint, doc will launch word etc etc.
Everything works great in all versions of windows except the new Windows 7 where i am getting this error message:
Im guessing this is something to do with permissions etc, but can anybody shed more light on this and where to look?