when I copied my project and brought it to a lab at school, the code works perfectly. Looks like I have a broken install at home, or perhaps some permission issue.I'm working on a homework assignment. It requires, among other things, that I create a program to read the contents of a text file, write them to an array with an upper-bound of 50, and if is full before the text file is exhausted, to increase the upper-bound by 10. Finally, the program must output the contents of the array into a list-box.Unfortunately, while my program successfully updates the upper-bound, any attempt to output the contents of the array causes an error stating the content of the array is null. Obviously I'm running into an issue when I ReDim the array!
I have the following array in my project that I'm trying to redim without losing the values.The problem with redim preserve is I can only redim the last dimension of the array. I want to redim the 2nd dimension without losing data. How do I get this to work?[code]
I have a gridview in my asp.net website that and I use vb for the code behind. Each time a row is bound an even called the Gridview_RowDatabound event is fired. So what I am doing is looping through all the cells in that row: [Code]
Problem is I get an error saying redim can only change the rightmost dimension. It would suit my needs to change both dimensions here as my final result will be to total each column in the array. what other method can i use if arrays don't suit this task.
This is my structure... <Serializable()> _ Public Class AcctRecords Public Amount() As Long Public DateC() As String [Code] .....
This is where I try to create a new instance but I get an error that states: Overload Resolution Failed Because No Accessible "NEW" accepts this number of ArgumentsPrivate Sub FixMasterArraySize(ByVal Cnt As Integer) ReDim Preserve Acct.Master(Cnt) For I As Integer = 0 To Acct.Master.Length - 1 Acct.Master(I).AcctType = New String Next End Sub
If Acct.Master(I).AcctType was a Boolean type there would be no error..
In a case where you would like to reset an array of boolean values what is faster, rediming the array or enumerating and resetting the values? I have run some tests and they seem to suggest that a redim is a lot faster but I am not convinced that it isnt a result of how I'm running the tests.
My tests seem to suggest that redim is nearly twice as fast.So could anyone care to comment on which is faster and why? Also would you expect the same result across different languages?
[edit]Sorry I left a bad title in this thread - confusing![/edit] Been a long time since I used an array - they are so limiting...But I need to build a simple string array - that I'm passing to a C/C++ function.
Is there any other way to do this other than keep REDIM PRESERVING??
I can't fix following code: Private Sub Dic_List(ByRef sender As Array) Dim L_sender As Integer L_sender = sender.Length / 5 - 1 ReDim Preserve sender(4, L_sender + 200) End Sub Error 1 'Redim' statement requires an array. But sender is an array.
I have an object array that I want to reference. The object array is in a deep set of classes so it takes class1.class2.class3.class4 just to get to it. I need to use this many times throughout my code so I figured I'd just create an object i.e. Dim Obj as Object and reference this array:
Dim Obj as Object = Class1.Class2.Class3.Class4.ObjectsArray
Problem is I can't resize the referenced array, by using the reference. The following does not work:
Redim Obj(5)
How come it isn't referencing my object array completely? is it because its the same object type?
I have this recently converted application from vb6 to vb.net 2008. One of the errors stated is:'Point' is not a member of 'System. Windows. Forms. PictureBox'.I have searched and not found an alternative to this.Also, it says ReDim cannot change the number of dimensions in an array.
I'm upgrading my VB6 project to VB.NET and I found one of the problem below relating to dimensional array.Here's my VB6 coding :
Private Function ConvertMatrixToBase0(ByVal MyMat() As Double) As Double() Dim i, j As Long Dim ConvMat() As Double[code.]...
When i port it over to VB.NET, i encountered error message 'ReDim' cannot change the number of dimensions of an array. for the line highlighted in red. And I suspect that VB.NET need to always define the exact dimension of the array during the declaration. But for the function above, for the array of 'MyMat()', I do not know what is the exact dimension every time it runs, and that is why i need to check the dimension of the array.My question is do we have any solution in dealing unknown dimension array in VB.NET? As in VB6, we can just define Array() instead of Array (,) in VB.NET.
As you will see from the code below I need to be able to tell before the array runs how many members of the array there are or else the program will crash. How can I redim the array depending on how many lines are in the text file (RECORDS.txt)
Imports System.IO Public Class Form1 Structure Nation Dim name As String Dim continent As String [Code] .....
As you will see from the code below I need to be able to tell before the arrayruns how many members of the array there are or else the program will crash. How can I redim the array depending on how many lines are in the text file (RECORDS.txt
Imports System.IO Public Class Form1 Structure Nation
The code below is the entire class that has the error in it... the errored code is highlighted in red. The error is,'ReDim' cannot change the number of dimensions of an array.
Code: Public Class clsMap Dim SR As System.IO.StreamReader Public Width As Integer Public Height As Integer
is there is any direct method or function in array class that can check if any given byte array is a subarray of other array?or should i loop through the each byte of main array to see if smaller array exists in that or not?
I have an assignment, and one of the requirements are to take a list of colors in an array and determine which letter, of the first letters of every color in the array, appears the most. (Essentially the mode, if converted to numerical values).
I have 2 arrays, tile(13,6) and loc1tile(13,6). Is there a way to make the values in loc1tile(13,6) equal to the corresponding values of tile(13,6)?Do I have to do it like this?
I have an array structure. and I'm done with it at some point. So I need to reset that array structure so I can start over! Is it possible to be done even with the sub array inside that structure array?
I've been learning how to implement genetic algorithms in vb, and some sample I downloaded basically does the following in a few places:
[Code]...
I gather that this process could be used to define the size of an array that is not known at creation, but becomes known later in the program. VB2010, however, doesn't like this code at all, and tells me ReDim can no longer be used to this end. Why? And is there an easy replacement for this?
I am writing a scripting language which used .net for execution. Now I have written a function which accepts an object and return a set of numeric values. I wanted user to pass any numeric array (e.g. integer,single,double,long) and I could return values in that format. I mean user can retrieve value in any numeric array type rather than specifying an array type. E.g.
I am using Visual Studio .Net 2008. I am using "Structure" statement for my work. It is working with me perfectly. I am not sure if Understand the structure statement very well because it does give me wrong answer if I change the position of "Redim" of the structure elements. My problem is the structure is using "Redim" in many places which is a dangerous procedure. I do not know how exactly to explain my problem because the structure in my code is used widely and called in many subroutines. I will try to explain with the below simple code:
[code]...
My question is: How can I move the all "Redim" statements outside the loop so that the Redim happens only ones? What does "TheCollection(Iteration + NumberOfMembers).TheResult" does take? Is it zero or what?I searched the web but I could not find a proper website or article which explains the structure. The only useful link I found is this:[url]
I have a public string() array defined, and each time a timer_tick event gets triggered, I loop through the array and visit web pages contained in the array.
for i = 0 to UrlList.Count - 1 ' Do stuff WebBrowser.Navigate(urllist(i)) While WeBbrowser.ReadyState <> WebBrowserReadyState.Complete Application.DoEvents() end while next redim urllist(0) ' I have tried w/ & w/out preserve urllist = nothing array.resize(urllist,0)
I just want an empty array w/ node count of zero. (Essentially eliminating the entire array) I have another process that fills the array.
Im coming from a background of writing vba in excel, but have go to the point where im fed up of having everything running in excel and have started leaning vb.net. i am trying to do something i have done before, but am pretty much rewriting it as having got the end i now see a better way of doing things
Normally Google is full of help full answers but today it isn't, i may be i'm doing something odd or am trying to use completely the wrong tool for the job am happy to be told either.
I am trying to take data from a text file dumped from one of our databases, i have read the (huge) and oddly formatted text file in, converted it to a 1d array = InPutArray
trying to give an average of an array in VB MVS2008. I tried using a sample code online but the averages it gives me are completely off. If I enter three ages (20) it gives me an average of 0.6, instead of 20. Here's the code:
Spoiler Public Class Form1 Dim Names(100) As String Dim Ages(100) As Integer
Edit by Moderator: Re:i have a question : how to pass array between vb & vc in dot net 2008.The description @ rio 1 does not work with me.It always complain abou
This code works fine except it does not pick up the last word at the end of the line. The text file it reads, words are seperated by tabs. When running this code it picks up every word except for the last and chucks it in the array, any ideas to find out how to get the last word placed in the array.
Do Until strStudent Is Nothing ' this will run through the read line function until it finds the end of the whole file itself For j = 1 To Len(strStudent) ' this will read through the entire line itself ochar = Mid(strStudent, j, 1) [Code] .....
