VS 2008 Adding Arrays
Apr 17, 2010i have ReceivingArray(100, 1) and Function(1), what i want to do is ReceivingArray(x, ) = Function(1) so that goes here^-----------this but i cant figure out how to do that
View 7 Replies
ADVERTISEMENT
VS 2008 Arrays Displaying States/searching Arrays?
Oct 30, 2010the statement Dim state(49) As String and maintain a list of certain states. The list of states should always be in alphabetical order and occupy consecutive elements of the array. The buttons in the program should give the user the following options: (a) Take the state specified by the user in a text box and insert it into its proper position in the array. If the state is already in the array, so report. (b) Take the state specified by the user in a text box and delete it from the array. If the state is not in the array, so report. (c) Display the states in the array. "
Private Sub states_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
state(0) = "Alabama"
[code]....
Adding Two Integer Arrays?
Dec 17, 2009For a project my teacher requires me to write a program that will do simple math on two integer arrays. User inputs up to 30 digits in two text boxes and I have to put that into two separate integer arrays.
'Big Integer Project
Option Explicit On
Option Strict On
[code].....
Adding Values Of Two Arrays?
Apr 26, 2012I'm making an application in school where I have to display the values of domestic, international, and total sales of company "Conway Enterprises." Everything seems to be working except it is not displaying the totalCompany sales as a currency. I'm sure it's probably an easy fix but I've been searching the internet and re-reading my book for awhile with no results. Below is the code, as I said everything seems to be working fine aside from adding the two array values and then displaying them as currency.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
[code]....
Arrays And Adding Rows In A Datagridview?
Sep 4, 2009I have an unbound datagridview, the datagridviews columns count may very depending on how many are needed like so
For i = 1 To myColumn
Dim RP As DataGridViewColumn = New DataGridViewCheckBoxColumn
RP.AutoSizeMode = DataGridViewAutoSizeColumnMode.None
[Code]...
The problem with this is that it puts everything in the first column instead of each column.
What I was trying was to have it place each value into its own column.
Referencing Controls - TextBox1, TextBox2, And TextBox3 - Reference Without Adding Extra Arrays
Oct 10, 2009Lets say that I had three TextBox's and they are named TextBox1, TextBox2, and TextBox3, is there a way to do like TextBox And Rand(1,3).Text = Nothing? Something similar to this where you click a button and it will choose at randomly a textbox to clear?I know I could do like Dim Number = Rand(1,3)if Number = 1 Then TextBox1.Text = Nothingend ifif Number = 2 Then TextBox1.Text = Nothingend ifor use else if and such, but I have 12 different textbox's, not three, so, I want to shorten the code, if you could do something like TextBox And Rand(1,12).Text = Nothing that would defenitely be way shorter, can you do anything like that to put together "TextBox" and the number to reference the control? I am not looking to use the full controls list to search for the right control nor to make an array that contains the controls, I just want to reference them without adding extra arrays or searhing for them.
View 2 RepliesVB6 Used Recordsetsor Arrays - .Net Framework In VB2010. Datasets, Dataviews. Tableadapters, Arrays. Enums ?
May 9, 2010In VB6 I load a recordset containg all of the records (6 fields per record)in a table into an XArray and then manipulate the records in the array and then write them back to the original table. The array issorted by the first field (1 to maybe 8000 or more) I need to find records in the array by an ID field and then move them (because of some external criteria that happens many times) from say number 400 to number 375. Then all of the other records between 375 and 399 were renumbered up 1 to fill the gaps left by the move.
The XArray worked well as it could find and also move to a next record easily to facilitate the revisions to each record quickly. Everything is done in VB6 in code and nothing visual needs to be shown to the user until say 2000 of these external changes are complete. What is the best, most efficient way to do this in the .Net framework in VB2010. Datasets, Dataviews. tableadapters, arrays. enums ?
Integer Arrays - User Enter In Big Integers Using - Two Parallel Arrays
Dec 10, 2009My assignment is to have a user enter in big integers using what i think is two parallel arrays. I got this far but now im stuck. I think i need to actually convert the text box input into an array but i do not know how to do that. I am all over the place in this project.
'Created/ Revised by: Jessica Falcetta
'Cap 204 Final Project: Big Integer Project
'Project Purpose: To calculate large integers through parallel arrays
[CODE]...
Passing Arrays Through Fortran Dll From App Turning To Single Element Arrays?
Feb 2, 2010I have a VB.net console app and I am opening a function in a dll written in fortran. I am passing 3 arrays through the function by reference. When they come back out the otherside they ahve all tunred to arrays of only one element And that element is 0.I read on the internet somewhere that when doing this kind of thing it is a good idea to only pass the first element of the array into the function.I tried changing my function declaration to accepting single elements rather than single dimensional arrays, and now the arrays are the same length before and after the function call, but they don't seem to be changing at all, so i'm not sure that this is working
View 1 RepliesStructures And Arrays In VB (VS 2008)?
Mar 14, 2010I would be more that happy for someone to tell me I am missing something very simple here I am writing code that - amongst other things - talks to code on other servers using the tcpclient function in .net
What I want to do is - in essense very simply. I want to define a structure which includes an array load it with data and sent it to the other end of the socket.
[Code]...
VB 2008 - How To Use Arrays Effectively
Nov 17, 2009I am having trouble figuring out how to use arrays effectively. I am trying to use them to store a data from text boxes and and then retrieve the data that's been stored.
View 15 RepliesVS 2008 2D Arrays And Mazes?
Nov 6, 2009I have a 2 dimensional array. Im trying to use it to generate a maze via some algorithms. Its pretty much way over my head though.But thats beside the point. If i need each array coordinate to store multiple values (like if south, west, north, east has walls), what would be a clever way to do so?
For instance:1, 1 in the array needs to keep track of 4 values at least (as do all other positions).
Should i make it an integer value like "1111" and replace with 0's where the wall is gone? the first 1 being north, second being east e.t.c. Would you choose this option?If someone wants to do a bit more research, here is some info on mazes:[URL]..
VS 2008 Arrays And Function?
Jun 17, 2011I am getting records in my dataTable that have nullvalues and need to pass each of those through a function that gets the missing value. In this case my records are address's that are missing the "Latitude" and or "Longitude" Field
I need to be able to retrieve the values and place them in the missing column and row
Nulladdress
Public Function GetNullAddress() As Address()
Dim Addresss = (From row In dtsold.AsEnumerable() _
Where row.IsNull("Latitude") OrElse row.IsNull("Longitude") _
[Code]...
VS 2008 Arrays And Strings?
Apr 27, 2009I have been summoned with the task of taking a tab delimited file and converting that file so it can be read by a third-party program. I am trying to think of the best way to do this, but I am having a hard time. Here is a view of the raw data that must be altered:
fkstoreidHeaderMarkB1RegNodateofbusinessNoRegEntriesTipsOverRingsVoids$Voids#NetSalesDP1_2GuestsDP3GuestsDP4GuestsDetailMarkfkdaypartidRecTypeGLB2Sales
1061HNULL101/01/2008NULLNULLNULL113.263512785.4714453137D2041005NULL2220.25
1061HNULL101/01/2008NULLNULLNULL113.263512785.4714453137D3041005NULL9170.19
1061HNULL101/01/2008NULLNULLNULL113.263512785.4714453137D4041005NULL670.75
[Code]...
I am toiling with the best way of doing this. So far, I am not having much luck. I have used arrays quite successfully in Java, but I am not sure that this is the best way to go here. I would have to get how many lines there are and read each line. Make the changes, and then go on to the next line. I think scanning the document line by line using a loop is the best way. However, I am not sure.
VS 2008 Arrays From Textfile?
Apr 26, 2011I'm working on a program for a class of mine but the ideas of arrays from a textfile just doesn't seem to click.
When the program loads, it should display the title of 17 books from the textfile.After, the user should be able to click a book title in the ListBox then click Compute Inventory to display the information below, which should be obtained from the textfile.
VS 2008 Arrays In A Drop Down?
Feb 21, 2010I have been given an assignment which is to program a working payroll system in Visual Basic 2008.I have done most of it but I am stuck at the arrays.I would like my system to store all the staff name that the user adds on the system into a single Array for example in EmployeeNames(50). For example if the user enters a new staff in the textbox name and confirms it by clicking on a button, I would like that staff name to be stored into my Array EmployeeNames(50).
View 1 RepliesVS 2008 Combining Two Arrays?
Jul 3, 2009I'm trying to combine two arrays. Simply append 1 array to another. I have two string arrays. Lets just say array1 and array2.would the following be correct?
array1.Copy(array1, array2, UBound(array1)) I guess I'm slightly confused about the parameters. When I try to use the above code I get green squigglies with the following error.Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated.
VS 2008 Using Text With Arrays.
Aug 14, 2011Say you have a Combo Box with a List of Months in it.When a Month is Selected, the number of days in the Month is displayed in a nearby Text Box.
View 1 RepliesVS 2008 Working With Arrays?
Jan 28, 2010working with arrays is not something I am too good at,Currently I have a form with 2 text boxes and a single button. I have two arrays, one populated with user names, the other populated with password. The user names and passwords match up in position in each array. I am thinking I might need to create a multidementional array of these two arrays.
[Code]...
If I do this however, any user name gets matched to any password, pending both exist. I would like to be able to compare the user name and password of a single user. Right now the user names and passwords are stored in separate arrays. Should I merge the two into a single array? If so how? And if so how do I go about matching the text box entries to the array(s) and making sure that the user name and password matches?
VS 2008 Arrays And Update Statements?
Jul 28, 2011I am working on arrays but i need to do a sql update statement. Contents of the array are also part a primary key in my table.How do I do an update using the array for example if my array is room names and my other table values are start date, end date and campus ID.
View 5 RepliesVS 2008 Arrays: Removing Items?
Aug 2, 2009I'm wondering what the proper way to remove an item from an array is. The way i am doing it at the moment is:MyArray(0) = NothingIs this the best way to do it as i'm having problems with my programme and i think it may be something to do with this
View 10 RepliesVS 2008 Byte Arrays - Getting More Values
Jun 11, 2010I am having some major problems with byte arrays. First off the bigger array I have the more values go missing, I originally wanted to make a huge array and just dump like a 100mb chunk of memory in it but when I did that every byte in the array returned 0. So I experimented a bit and found 4kb to be the biggest chunk size to reliably not return 0.. ok I figured I'll just loop the 4kb and glue them back together later but no such luck, after being combined into the main array the bigger the number gets the more values that should be there just aren't.
Here's a code sample:
Dim retval(4095) As Byte
Dim combval(RLen) As Byte
For i = 0 To RLen - 4095 Step 4096
ReadProcessMemory(ProcAccess, i, retval, 4096, 0)
retval.CopyTo(combval, i)
Next i
WriteLine(combval(321603964))
WriteLine(ReadMemory(321603964, 1)(0))
So with the last 2 lines if I pull up some smaller number like 8 digits or so it reports back no problem but anything slightly bigger like the number i have written in there right now is just 0. After some additional research I discovered that the reason why 4kb is the max size I can reliably get is coz that's the size memory chunks are made of, "page" as they call it. Why the memory reading drops off at higher addresses alltho I suspect it has something to do with the way memory is structured and I am just not hitting the startpoint of a page anymore due to an offset or something somewhere.
VS 2008 For Each Loop And Multidimensional Arrays
Jun 15, 2010I've got a multidimensional array set up like this:
[Code]...
What I want to do, is use a for each loop to add the strings of the array into a ComboBox.
VS 2008 Join Multidimensional Arrays?
Aug 21, 2010I have been trying to join multiple multidimensional arrays but with no luck. I basically have three two-dimensional arrays as following:
[Code]...
VS 2008 Multi Demensional Arrays?
May 14, 2010I am trying to create a array that holds a series of arrays.A holds X amount of array.so I thought I could declare dim A(howmanyIwant)(3) as String however that does not seem to work.How many arrays A has to hold depends on a parameter.So how is it really done?In the end I would like the result:
A(0)(0) = 1
A(0)(1) = 2
A(0)(2) = 3
A(1)(0) = 1
A(1)(1) = 2
A(1)(2) = 3
[2008] Running Arrays From Structures?
Feb 16, 2009i am currently running a program that will allow me to save all data on the form to open and edit at will. It uses a structure of 8 arrays, each with 16 values to save the information.
When i try to save the text into the array, it tells me that its a bad record length and crashes.
Here is the
Public Structure save_weekly
<VBFixedString(8)> Public dates() As String
<VBFixedString(30)> Public description() As String
[Code].....
Comparing Arrays :: Possible Without Iterating The Arrays?
May 3, 2010I was wondering if anyone knows a built in method ( LINQ say or a LAMBDA expression or other way ) that you can compare2 arrays - collections that would be valid for an equivalent 3rd array - collection which is a combination of the 1st two.
As an example consider;
* * *
A L E
[code].....
Sort Three Arrays (the Other Two Arrays Are In Sync With The First)?
Oct 13, 2009How can I sort three arrays so they are sorted together (the other two arrays are in sync with the first)?unsorted unsorted unsortedarray1]CODE]....
View 9 RepliesVisual Basic 2008 Control Arrays
Feb 21, 2010I'm looking at controlling properties of an array of buttons in VB 2008 (express). I have been looking at the sample code from a whitepaper at MS, and it kind of makes my head spin compared to what was done in VB6! (and yes I'm an amateur
[Code]...
VS 2008 Question From A N00b Searching Arrays?
May 1, 2009First (and probably not the last) post. My Problem I would like to search an array for a certain text (this has been read in from a text file (42 lines) and split to an array of 11 splits successfully). I see all the data in the array with a msgbox or written to a textbox. So I know the info is in the array.
When the text (will be from a textbox eventually, but for now is a fixed string) is found, (this is (0)), I would like to put the other parts (2), (3) etc.....into strings of their own. Obviously when not found, the search should move to the next line. My problem is, that I can't get a search loop working and moving to the next line until the text is found, it sticks on the first line, even if wrong (which it is!).
Of course when the text is found, I can write (2), (3) etc to variables and exit the search.
I know this has probably just a simple solution, but I've only been learning vb for a week now and my head is spinning at this problem, I just can't get the syntax and order right.