I have a Datagrid contain IdNo, EmpName, Address, PassportNo, WorkingAreaCode on my Windows Form (VS2010) with a Textbox to search records. my requirement is if I enter any required details in the search Textbox that should search all the columns and filter records.
View 4 RepliesI am trying to find or search record from a datagridview so I could replace it with a new data from a textbox. I used the datasource.find() method the only problem is...If the my Table consist only of one Row, the find method replaces that one row everytime i insert a data. I just couldn't figure out how to datagridview works with if else statment.
View 2 RepliesI have a number of word documents which I need to extract information from. I found code to do it with a text document, but I can't figure out how to apply the same logic to a .docx file.
Sub search()
'
' search Macro
[code]....
I'm maintaining a Datagridview on my Windows Form. When I open the form all the contained records are displaying, which is from SQLserver Table ok. when I open the form the datagridview should show just black and after I insert a new record that particular record should only display on that form gridview. [Code]
View 1 RepliesThe form it is on is frmMidwest.vb, the database is MarchMadnessDB, with the table being tblMidwest and the column being Username. I am trying to get it so when the user loads frmMidwest.vb it will then check the database to see if the user has entered their picks and if they have it will load their picks back into frmMidwest.vb if the database cannot find their user then it needs to add a record to the database and allow the user to enter their picks. I have already established this with
TblMidwestBindingSource.AddNew()
But if the user exists I do not want them to be able to enter another record. The primary key in the database is the username.
I have a dataset, a bindingsource, a tableadapter, and a bindingnavigator on my form. how to find data and locate to the new position?
View 1 RepliesMy application will start (dataset filtered by username/date) and if it's the first time the user has used it today it will be a blank entry form because there is no record for today created. The user can just type data into the blank form and close it. On the form closing event I want it to run a tableadapter.insert(username, date, x,x,x).
If it starts a second time it will load showing today's entry because today's date was inserted previously when they closed the form. So this time when they close the form I want the form closing event to just run a tableadapter.updateall(dataset) command. I need some help with my form closing event...
[Code]....
I have created a project that has an add a new record, edit record and a search form, that has multiple text, combo boxes and is working great.Last nite I have added a checkbox under my add new record form and i am saving the checkbox value to my database, so far so good. I would like to be able to search any record that is mark with a checkbox to show up in my search screen when I do a search: [code] The problem that i am having is that now that I have added the code to my project to search for the checkbox field in the search screen and if I leave everything blank and click on the the search button I get no record found. I expected to see all that data, since I have nothing selected. Now if I click my checkbox, as soon as I click on my search button I see that two records that I have added for my test.
View 1 RepliesMy database : table1
ID FIRSTNAME AGE
1 Sumit 22
2 Sanjeev 23
i have gridview 1 and textbox1 and button1 i want when pages load the gridview displays the all records from table1 and also ...i i wanna search record for firstname by typing sumit in textbox1 and click on button1 then in gridview the record of sumit will be shown ..by default gridview display alll records from table1 How to do this My Selct Query is below : but it doesnot display all record ...but it can display record if you search for a particular record .
[Code]...
Dim table As DataTable = par.Tables(0)table.DefaultView.RowFilter = String.Format("Patient_Number = '{0}'", txtPatientID.Text) txtPatientID.DataBindings.Clear()txtPatientID.DataBindings.Add("Integer", table, "Patient_Number") DataGridView1.DataSource = table
However I get an error:Cannot bind to the property 'Integer' on the target control.Parameter name:PropertyName
I am having difficulty with searching on a Dataridview. I want the user to be able to enter a characters into a textbox and as they enter them the Datagridview will reduce down base on the name that is being typed in.So for example the user types: Smthis will show all the Smith and all the Smarts etc.So to do this user the Textbox change event. This I think works ok. The problem I have is getting it to filter on that data.
I have a dataset:
HTML
SELECT CompanyID, CompanyName, Address1, Address2, Address3, Town, County, Country,
[code].....
I am extracting datas from the table to display in datagridview1 as shown in image1.
Now I want to search the datagridview1 and display the result in datagridview2 as shown in image2.
Please do refer the attached images.I am using Visual basic 2010 for this.
I am extracting datas from the table to display in datagridview1 as shown in image1. Now I want to search the datagridview1 and display the result in datagridview2 as shown in image2.
I am using Visual basic 2010 for this.
I have a windows app in vs 2005 so I want to search a record by id or name. what i have to do?
View 23 RepliesThis is the code I posted before. I have a thread open but it is confusing. I have a search of a datagridview. The search works. Now I would like to highlight the corresponding row of the search result. Scroll down to the highlighted row. If there are multiple results to the search critiria the next one should be highlighted.
Dim foundit As Integer = 0
Dim intResponse As DialogResult
With Me.DS.table
[CODE]...
I'm a bit of a noob at this and finding that all my research that's led me to wanting to do things right for data integrity are making it a bit more complicated on the front end.
Presently I have a Form in which I have two DataGridViews that I'm populating, each with it's respective stored procedure.
What the form is for is for linking rows from the one DataGridView (I'll call it DGV1) to a different one in the other DataGridView (DGV2).
Now to facilitate the ease of doing this for the user I want to both have the dgvs fully populated so that if the user wants they can just slide on through and manually select the rows in each they want and then there'll be a button to select which I'm planning to then use another stored procedure to then insert this connection between these two items into the database.
Another thing to facilitate this is a search bar. I want them to be able to type in something and have the datagridviews both navigate to where their selection is as well as selecting it so that it's then ready to be bound to the selection in the other.
What I'm wanting to know, and having a hard time figuring out, is how do you get such a search function to work on DataGridViews that I have bound to these read only stored procedures? How do I search and select within the DataGridView? And then how would I go about using the selection from two different datagridviews and putting those as parameters in the stored procedure that I wanted to use to then record the relationship in the database?
I have 2 tables in a database. Database CUSTOMER.MDB, Table1 fields are - CustomerID, Name, Address. Table2 fields are CustomerID, Itemname, Amount. I have created a form where I am using Table2 for Dataentry. I want to write code on CustomerID Lostfocus that 'When I enter CustomerID in the form it should check the CustomerID in Table1 and if exists it should print the NAME from Table1 in a Textbox. If not found it should give a msg.'Both the tables are linked on CustomerID.
View 5 RepliesIm trying to find out what code i would use if i wanted to search all my records in a table for those who are female...but the problem is what kind of place i should store these records initially, Mdf or Mdb? i've tried using dao code (rs.findfirst...but it says theres an error about read only database or something...)
View 8 RepliesHow can I Print the the records I search in the listview!!?
View 2 RepliesI have developed an application in VB2008/MySql as MySQl connector.I did serach record method but i need serach record using wild charcters i.e. like operator(S%,%S).Have a look at the normal search record code .
For Each de In myHT
If de.Value.ToString() <> "" Then
If iCount = 1 Then
[code]....
i want to search a record from sql database searching by first name so im using a function in the data layer but it is not working
Public Function searchCustomer(ByVal custFname As String) As DataTable
Dim tabletdata As New DataTable
Dim conn As New SqlConnection(con_string)
[code]....
I have a textbox for searching a database. When the text changes it runs a functioncFilter() and loads the records. It is set up to search different columns of a database, and it unfortunately only the first record matching is pulled from the database. Example: when the database contains two people (Bob Smith & Bob Smitt) the user can type the name in the search field. However When the user types Bob Smit it only returns Bob Smith and not both names in the database. I want this to act as a filter, dynamically changing the last with each additional letter typed in the search box. Below is my source code,
Public Sub cFilter()
Dim myConnectionstring As String = ("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & My.Settings.dbLocation & ";Persist Security Info=True;Jet OLEDB:Database Password=BCFAdmin")
[code].....
I have finally taken the plunge and am trying to get my head around VB 2010 after years of playing with VB6. I am using the free VB 2010 Express edition to get me started I am not an acomplished programmer in VB6 - being totally self taught from books, files , forums like this and internet searches so I am finding the transition to .NET syntax very painfull. Unfortunately,
[Code]....
how can i search a record in a database by specifying the range between the two dates using two date time pickers the first date time picker is to display the start date and the second to display the end date b the records are to be displayed in a list view below is a code attached that am currently using [code]
View 14 RepliesI am trying to do a record search feature in my datagrid, but I can't find any reference for this. What I want to do is I can search any of the row that contain the text that type in TextBox1 by clink on Button1. I am using VB2008 and the datagrid is connect to access.
View 1 RepliesI have a slight problem on the SQL server script, this script works if I select the radio button name will be looking for a first name but if I choose the company will seek based on the company name. this program for the hotel following code
enter code here
#Region "GuestList"
Sub SearchRecord()
[Code].....
how can i search a record in listview using a textbox and i want the record to be highlighted on listview.
View 2 RepliesI am using Visual Basic 2005 Express Edition I have to find a string in record of a ListBox; the string is in fixed place on the record. I wrote this code and this code working ok:
[Code]...
i have problem to search and update record database sql. this is my code. i using mysql database and Microsoft Visual Basic 2008
[Code]....
but i have error on Word command.ExecuteNonQuery(): MySqlException was unhandled. There is already an open DataReader associated with this Connection which must be closed first
How can I search for record(s) started with alphabet entered e.g all data that starts with A using parameter with sql dbase..Neter
View 6 Replies