VS 2010 ERROR On Restarting A Thread

Jan 12, 2012

I want to know how can I restart a terminated thread?I have a 3 buttons (Button1: Start/Resume, Button2: Pause, Button3: Cancel) code like this;

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If (CrawlerThread.ThreadState And ThreadState.Unstarted) <> 0 Then
CrawlerThread.Start()
CrawlerThread.IsBackground = True
Else
CrawlerThread.Resume()

[Code]...

When I click to Button1 it starts to thread, then If I click to Button2 it stops as well then I click to Button1 again to resume it. All these processes works fine. But when I click to Button3 for terminating to thread, yeah It works, after that If I click to Button1 to start it again It gets a error: "Thread is not running; it cannot be resumed."

View 4 Replies


ADVERTISEMENT

VS 2010 Error - Cross-Thread Operation Not Valid: Control TbPlaca1 Accessed From A Thread Other Than The Thread It Was Created On

Aug 13, 2010

In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"

Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()

[code]....

The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".

View 3 Replies

Multithreading - Stopping And Restarting A Thread?

Jun 11, 2009

I have an application which has a thread running which makes constant calls to a server. Occasionally, the calls become unresponsive, and I would like to stop and then restart the thread.How do I do this? I can't use mythread.Abort() because then it doesn't allow me to start the thread again.

View 5 Replies

Error - Cross-thread Operation Not Valid: Control 'txt1' Accessed From A Thread Other Than The Thread It Was Created On

Jul 21, 2009

I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.

Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()

[code]....

I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)

View 7 Replies

Error : Cross-thread Operation Not Valid: Control 'l_users' Accessed From A Thread Other Than The Thread It Was Created On

Jun 21, 2012

When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.

Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub

View 3 Replies

Error Saying "Cross-thread Operation Not Valid: Control 'lblOnline' Accessed From A Thread Other Than The Thread It Was Created On."?

Feb 7, 2011

Ok i have a Form with the following

Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")

[code].....

View 12 Replies

VS 2010 Error Calling A Control From Another Thread?

Feb 20, 2012

A thread listens for incoming information from a server will add the received string to a custom control (containing a textbox and a listbox, I've called it console). This requires an invoke so I used the following

Dim InvWriteCons As Console = Gary.ChatCons
Dim INvWriteText As String = "DEFAULT"
Public Sub InvWrite(ByVal cons As Console, ByVal message As String)

[code].....

View 2 Replies

VS 2010 For Loop Inside Backgroundworker Gives Thread Error?

Jul 5, 2011

I have a backgroundworker that is downloading data from different webpages and process them to a datagridview.I get the Cross-thread operation not valid error on the first For loop.

Private Sub BackgroundWorker1_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
dim i as integer
tot = (numPostnrTo.Value - numPostnrFrom.Value) / 10

[code]....

View 12 Replies

VS 2010 Multithreading Cross-thread Operation Error

Oct 30, 2011

The error occurs at: For i As Integer = 0 To txt_load.Lines.Count - 1..The project exists of 2 rtb's. One with a list of lines. The other will be filled with the converted lines. The main reason that I use it is that I want to use the app during the conversion. The second is that I want to learn how this works.[code]

View 9 Replies

Error - An Attempt Has Been Made To Free An RCW That Is In Use. The RCW Is In Use On The Active Thread Or Another Thread

Jun 6, 2011

I am in a trouble with this error:"An attempt has been made to free an RCW that is in use. The RCW is in use on the active thread or another thread. Attempting to free an in-use RCW can cause corruption or data loss." I am not sure if the RCW-error is related to my problem but I was having this error last January 25. It appears when I am ending my application. I ignored it. The next morning when I resumed coding for my application, the changes I am making does not appear at run-time anymore. Whatever GUI changes I make in my application (at design time), it does not make any effect any longer when I am running the application. What is causing this? I am so afraid if I have to restart my application from the scratch. I have gone far.

View 1 Replies

Error: The Calling Thread Cannot Access This Object Because A Different Thread Owns It

Nov 25, 2011

I have am using a Twitter streaming class library, and would like to update a listbox when a new tweet is posted. I have it all set up to the point where a message box will show when a tweet comes in, but when I try to insert this tweet into a listbox I get this error: The calling thread cannot access this object because a different thread owns it. I don't know what I need to do in order to insert this tweet.

View 4 Replies

Error With AddEclippse - The Error Is: Cross-thread Operation Not Valid?

May 5, 2012

I am having a problem that I keep getting the following error when I try to run my program.I am trying to make a circle the size of the value of FrameSize.A first chance exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll

This is the details of the error:

System.InvalidOperationException was unhandled

Message=An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control '' accessed from a thread other than the thread it was created on.
Source=DreamCatcher[code]......

View 3 Replies

C# - Elevation Without Restarting An Application?

Jul 14, 2009

Has anyone managed to get administration rights through the UAC without restarting the application or embedding a manifest file?

I'd like to write to some files that only administrators can modify, without relying to another elevated application. Is it possible to impersonate an administrator previously calling with some native API the UAC prompt?

I guess this is not possible and I'll have to use an external tool with elevated rights, but I'm asking just in case.

EDIT: I know there are some other similar questions around, but since they do not cover the topic of impersonation (as fas as I've seen), nor some possible native call to the UAC prompt I decided to give a new thread a go...

View 4 Replies

Restarting The Program And Waiting?

May 8, 2012

is there a function that makes the program wait? and is there something that makes the program restart itself?

View 6 Replies

VS 2008 Restarting Without Administrator [UAC]

Apr 6, 2010

I've made an application that is meant to be run without administrator privileges in Windows Vista / 7, because UAC disables drag and drop events from lower applications into higher ones, because they could pass bad information into the high trust ones [for example, standard explorer cannot pass files into my program that a user might run in administrator].

[Code]....

View 4 Replies

Cross-thread Operation Not Valid: Control 'Panel1' Accessed From A Thread Other Than The Thread It Was Created On." ?

Nov 3, 2011

This is the error message I am getting:

"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:

Panel1.Show()
Label1.Show()
Label2.Show()

why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.

View 4 Replies

Threading Progress Bar In .net - Thread Operation Not Valid Control 'ProgressBar1' Accessed From A Thread Other Than The Thread It Was Created On

Feb 17, 2012

Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.

I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes

[Code]...

View 2 Replies

Waiting For Threads - Thread.join Suspend Execution Of Code On Calling Thread Until Spawned Thread Finishes Or Is Aborted

Sep 2, 2010

My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...

With that in mind, I tried this:

For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)

[CODE]...

However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).

View 4 Replies

Cross-thread Operation Not Valid: Control 'Autocad' Accessed From A Thread Other Than The Thread It Was Created On

Jun 6, 2010

I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.

Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class

My main class loads frmCad as well as CadApp.

Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub

When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.

View 4 Replies

Cross-thread Operation Not Valid: Control 'label2' Accessed From A Thread Other Than The Thread It Was Created On?

Feb 9, 2011

My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.

[Code]...

View 8 Replies

Cross-thread Operation Not Valid: Control 'lblStatus' Accessed From A Thread Other Than The Thread It Was Created On

Apr 1, 2010

I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:

'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private

[code]....

View 3 Replies

Cross-thread Operation Not Valid: Control 'statusHO' Accessed From A Thread Other Than The Thread It Was Created On

Jun 6, 2009

My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.

System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:

[Code]...

i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.

So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details

View 1 Replies

Cross-thread Operation Not Valid: Control 'lv1' Accessed From A Thread Other Than The Thread It Was Created On?

Aug 4, 2009

Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.

Dim lvi As ListViewItem
For Each lvi In lv1.Items

[code]....

View 1 Replies

Appending A Listview Rather Then Clearing It And Restarting

Mar 18, 2010

Im making my own process manager. but if you update it every second to keep it in real time it makes this horrible shudder (items being removed and updating) losing your selected item in the process.[code]how would i change that to only add the new items rather then restarting?

View 4 Replies

Associate A Filetype WITHOUT Restarting Explorer.exe?

Mar 17, 2011

How do you associate a filetype, for example ".tkoen" (idk..), to the registry without restarting Explorer.exe for updating the filtypes..in Explorer.exe..?

View 2 Replies

Database Seem To Update When Restarting An Application After Some Changes?

Apr 11, 2009

Why doesn't the database seem to update when restarting an application after some changes?

remember to mark the replies as answers if they help and unmark them if they provide no help.

Welcome to the All-In-One Code Framework! If you have any feedback,

View 1 Replies

Restarting A Single Instance Application?

Apr 13, 2009

Is there any way of restarting a single instance application, which is deployed via clickonce?

View 1 Replies

Restarting Windows Service From Website?

Sep 3, 2009

I've a website that puts info into a mySQL database and a windows service (written in VB.Net) that polls the db and actions what's in there.However, occasionally it stalls and rather than having to RDP into the server, I want superusers to click on a button to restart the service.I can get the button to say, do a directory listing of c: output to a test file so the whole 'getting a command to execute on a remote server' issue works. However, I can't restart services.I assume this is a security thing (although it has full rights to c: I thought I'd sussed that already).The website runs under the normal IUSR_user so am I doing something really stupid or can someone explain how to get the service to be restarted ?

View 4 Replies

Shutdown - Make A Menu For Logging Off, Restarting, And Shutting Down

Dec 26, 2009

How do i make it so when you press a button, it shuts down your computer. I am wanting to make a menu for logging off, restarting, and shutting down.

View 9 Replies

VS 2008 - Restarting WebBrowser / Recognizing Deleted Cookies

Jun 28, 2009

My problem is I have code delete a cookie it deletes it perfectly but my webbrowser1 doesnt recognize that its gone unless I restart the app. I'm wondering how I could get the webbrowser to restart (not refresh) or any way to get it to recognize the cookies no longer there?

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved