I'm needing to make something to ALWAYS replace a "." to "," in all textboxes...
That's what I'm doing, and it's working:
Private Sub Timer1_Tick(sender As System.Object, e As System.EventArgs) Handles Timer1.Tick
For Each myControl As Control In Me.Controls
[Code]....
Is there another way to handle the leave event of multiple textboxes other then coding in each event handler? I may not be using correct terms instead of doing this: (Existing)
Private Sub leveladjstvaltxt_Leave(ByVal sender As Object, ByVal e As System.EventArgs) Handles leveladjstvaltxt.Leave
If Me.leveladjstvaltxt.Text <> "" Then
Dim levels As Integer = CInt(Me.leveladjstvaltxt.Text)
Me.leveladjstvaltxt.Text = Format(levels, "#,###")
I have 30 TextBoxes all need same formatting , so I was trying to come up with something like this: (trying)
For Each ctrl As Control In Me.Controls
If TypeOf ctrl Is TextBox And ctrl.Text <> "" Then
Dim val As Double = CDbl(ctrl.Text)
CType(ctrl, TextBox).Text = Format(val, "#,###")
End If
I am stuck though and don't know where I would place that code if this is something that is even possible. Only thing I can currently think of is in the leave event which defeats the purpose, I wanted to avoid having to place the code in 30 different textoxes leave event.
add a code to handle the TextChanged event of my Textboxes to clear the Result box.
Private Sub btnCalculate_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalculate.Click
txtResult.Text = txtRate.Text / 100 * txtAmount.Text * txtYears.Text
End Sub
[code]....
I have an event in a module, like this:
vb.net
Module Module1 Public Event Event1(Value as Boolean)End Module
I want to be able to handle this event from different forms. This is what I tried to do...
vb.net
Public Class Form1 Private Sub Event1Handler(Value As Boolean) Handles WindowsApplication1.Event1 End SubEnd Class
But I get a squiggly line under WindowsApplication1 that says Handles clause requires a WithEvents variable defined in the containing type or one of its base types. I tried to swap Module1 in, but same thing. I tried without anything in front of Event1, but still nothing.
I have multiple textboxes which I want them to perform the same thing upon clicking them. By default I can use the handles textbox1.click for 1 single textbox but I am not sure how to do handle multiples of them. Of course I can write a handler for every single textbox but I have about 50.
Sub TextBox1_click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.Click
If Button9.Text = "Make Changes" Then
If TextBox2.Text <> "" Then
Frm_Cine1.Show()
[Code] .....
I'm developing an app that should allow the client to add several content sections to a page (in tabs). However I haven't found a way to easily create a form for editing the tabs.Assume for now that a tab just contains a title. I have a form that adds a tab, that's simple. But I also want a form that displays a text input for each tab and allows the titles to be edited and saved. I'm struggling with two main concepts:How to dynamically display the fields after grabbing the tab data from the database (each tab has its own row in the table).How to loop through the submitted data and update each tab in the database.How to select a particular text field from the number (e.g. given "1", how to select the element with ID "TabTitle_ 1".[code]I thought something like TabTitle[0] would be acceptable and allow for easy looping (as it does in PHP) but it's "not a valid identifier" apparently.It's very possible I have the approach completely on its head.
View 1 Repliesis it allowed to use more than one Sub to handle the same event ? For example , may I have 2 separate subs to handle the Load event of a form ? Will they fight each other ?I have tested it and it seems to work fine , nevertheless I thought I'd ask you . In case you wonder , there is no great deal , I just want to copy the same lines of code in more forms so I am doing it just in favor of the looking aspect .
View 5 RepliesI have referred DLL in my project. I have to handle the event from DLL in VB.net code. I guess we can do using WithEvents. Can you give me complete picture?
View 2 Replies[code]But even here it seems the handler isn't registered until after New has completed.However, in real life the event is raised within code that's semantically part of the object initialisation, and I'd really rather not have to create some Initialize function.
View 2 RepliesI have a problem to handle an event on a custom control a have on a form.... So first i made a custom control that is just a groupbox with some labels and txtboxes. That control i add dynamically to my form like this (Baycontrol is the name of my control)
Declaration
Code:
Friend Bay(29) As BayControl
Add the controls to Form
Code:
For Simindex = 0 To 29 'Me.Bays - 1
[Code].....
I have been reading up on this, but I can't get it to work for me. I am reading in comma delimited text into a three-column datagridview control. The third column is a combo box which only accepts certian values. If the data being imported into col 3 is not in the combo box list I get an error that tells me to handle the data error event.trying to capture that error and get rid of the default error message box. I am working with a Try/Catch statement, but it doesn't seem do anything.
Do Until fileReader.EndOfStream
stringLine = fileReader.ReadLine()
If Not stringLine.StartsWith("'") And Trim(stringLine) <> "" Then
[code].....
I must be missing something really basic, but I just can't figure this out. I have a module (declared as a Module, i.e. a VB "static class") and I have an event declared in it, and places to raise the event. But I can't figure out how to handle the event.
Let's call the module MyModule with an even MyEvent. Like so:
Module MyModule
Public Event CallHelp()
Sub ExamineStuff( ByVal input As String)
[code]....
I have a mouse click event for one of my controls. I then change the text of that control to something. I also have several other textboxes and want to do the same. How can this be done? I thought maybe this:-
Private Sub txtTitle_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles txtTitle.MouseClick, txtTitle2.MouseClick
End Sub
My problem is how do I determine which has triggered the event (title1 or title2).
I use VB.NET 2010 I have created a user control which holds a few textboxes, where the user can find articles. This user control is added to several Forms (where ever the search is needed). I have to handle the key down event of the user control, but it isn't working... The usercontrols's Key_Down Event is never fired. - I have set KeyPreview of the form to true, then the Key_Down of the Form is fired.
View 6 RepliesI cannot Unresolve a post.I have a datagridview control with a combo box. The user loads data from a file into the control. If there are errors (the element in the combo box column is not in the combo box list) I would like to:
1. capture the row in which the error occurred, and store it in code/memory
2. change the cell backround to red (this is not that important)
3. continue without a message at the time of the error
4. post a message with all of the errors after the load is complete
I am using the code staight out of the Microsoft example to try to figure how to do this, but it is not posting any messages when I load bad data, so I am not getting any smarter from the example.[code]
I am using the Event Handler below for the Enter Key Press Event, it is running when ever any of the keys is pressed. This is not so much a problem when the app. is running, unnecessary yes. It is giving me problems when ever I am Debugging using Breakpoints. How can I change the Handler so it only runs when the Enter Key is Pressed, doing away with the If statement?
Private Sub Form1_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles Me.KeyPress
If e.KeyChar = Chr(Keys.Enter) Then
'Different code blocks will run here depending on what
'TextBox or Label is selected.
End If
End Sub
I have this code in ButtonClick Handle event but nothing works :/ I was wondering why... I tried msg("") as well as the first line in the code to see if it works but nothing!
Dim myConn As SqlConnection
Dim cmd As SqlCommand
Dim sqlString As String
[code]....
what is the best way to handle on selection change when the form loads?My problem is, the index change while te form is being loaded, which then in turns tries to run my code.Here is the FormLoad Event, that gets an xml stream from the web, dumps it in a dataset, then bind to datagridview.
Private Sub frmOrders_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Using reader As XmlReader = XmlReader.Create(New StringReader(XMLDoc))
[code].....
How can I handle aCheckedChanged event for a cell in a DataGridViewCheckBoxColumn? If applicable, I prefer VB.NET answers over C#, but I'll accept either.
View 2 RepliesI have to handle a particular kind of KeyDown event. I have made a new virtualdesktop for my GPS Windows CE based thats launch an external program (like TomTom). I have to handle and capture event when key wheels are pressed (volume control). I know only like as "Private Sub Form1_KeyDown()" but this function works only when Form1 is focused... How can I continue to get and traps event when my TomTom is still running and focused?
View 7 RepliesDo you mean, "opens a file" or "is opened with a file"?
View 1 RepliesI have a webbrowser control (in fact, a control inheriting from webbrowser), and added a tooltip control to the main form. Then, I filled the webbrowser tooltip text.But the tooltip never shows. (because the web browsers manage mouse hover with html?)I examined all the events exposed on the webbrowser control, and there is not one about mouse hover.so, the question is: How do I show the tooltip? Should investigate HTML, or there is a .NET control way?
View 2 RepliesMethod 'Private Sub trigger_Triggered(sender As Object, e As OamsIDD.VoamsWorldIDD.OamsStateChangeEventArgs)' cannot handle event 'Public Event Triggered(sender As Object, e As OamsIDD.VoamsWorldIDD.OamsStateChangeEventArgs)' because
[code].....
Say I have a button that creates more buttons with a random .Text property, and placed them on the form in different locations. And since these buttons are being created at runtime, I want to be able to have an event handler for all button controls on the form that makes the form's text the same as the sender's text.
View 3 RepliesIs it possible to handle a groupbox rightclick-event in VS 2008? I want to display a dropdown menu when my groupbox is rightclicked, but it seems that a groupbox doesn't have a click-event... Is there a way to make this happen?
View 8 RepliesWhy can't a sub implement an interface and handle event at the same time? The following gives my a syntax error:[code]I know I could handle this kind of logic with another method, but that is not the point. I just want to understand the reasoning behind this.
View 2 RepliesI have used the below code but its not showing the msgbox. What is wrong with this code ?
Private Sub frmSimple_Disposed(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Disposed
Dim result = MsgBox("Are you sure you want to Exit ?", vbYesNo)
If result = DialogResult.Yes Then
me.Close()
End If
End Sub
I have done this the other way many times as it makes sense (the page knows about the control as it has been added to the page and can handle the 'child' event)
Is it possible to do it the other way? I think not as the control doesn't know what page it is going to be on
The reason i ask this is that I have a modal popup on the page to ask users to login, and it is only when the user has logged in that I want my user control to go away and execute some code but I am not too sure how to tell the control this has happend?
I'm creating <div>'s and appending them to a literal's text property. I have added a <a> element to the text so that the user can click on a specific element. How can I tie that to a function to handle the event in the codebehind (vb.net) ?
Example of my Literal.Text ...
For Each row As DataRow In oDataTable.Rows
MyLiteral.Text &= "<div style='font-size: 8.25px; text-transform:uppercase; padding:3px; background: #FF8C00; border: 1px solid #000; margin: 0 5px 0 5px; display:inline-block; float: left;'>" _
& row.Item("LastName") & " | <a href='#?"& row.Item("ID") & "' style='color: #000;' >X</a></div>"
Next
So the above code I want to somehow allow the user to click the X link and then it would remove that person.
Base form baseForm generate an array of childForm (3 fo them). I have one event handler in baseForm which is called when user close each childForm. The problem is that this event handler is only called when the last childForm is closed. When other childForm is closed, the event handler doesn't do anything.
View 7 Replies
