[code]But even here it seems the handler isn't registered until after New has completed.However, in real life the event is raised within code that's semantically part of the object initialisation, and I'd really rather not have to create some Initialize function.
View 2 RepliesI must be missing something really basic, but I just can't figure this out. I have a module (declared as a Module, i.e. a VB "static class") and I have an event declared in it, and places to raise the event. But I can't figure out how to handle the event.
Let's call the module MyModule with an even MyEvent. Like so:
Module MyModule
Public Event CallHelp()
Sub ExamineStuff( ByVal input As String)
[code]....
I have a "partial" class in VB.NET. Half of it is auto generated by a code generation tool. That half implements INotifyPropertyChanged, so any properties in that part of the partial class raise the PropertyChanged event.In my "custom" part of the class, I declare another property that depends on one of the properties in the auto-generated side. Therefore, when that auto-generated property changes, I also want to raise a PropertyChanged event on my custom property that depends on it.
If I go into the generated part of the class and raise the event there, that will get overwritten if I ever re-generate that part, so I don't want to do that. I would rather add an event handler in my side of the partial class that checks if the generated property changed, and if so, raise another event for my custom property.
[Code]...
I'm assuming it's because normally you'd use the WithEvents keyword to tell the compiler that you're subscribing to events from that object. I don't have a clue how to do this inside of the class that's actually raising the event, or if that's even possible.
I am making a function of an application that when a function is called the application will close all processes that are owned by the user and were started after a specific point. My thoughts on this would be to trigger an event in my application every time a process is started and ended, and only if the processes is owned by the user, the event should get information (e.g. the process ID, name, etc) about that process and add or remove that information to/from an array depending on if the process starts or ends. Then when a function is called end all the processes in that array.
[Code]...
This is the abstracted code for simplicity.
Public Class Form1
Dim WithEvents bt As New Button
Private Sub Bt_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt.Click
MsgBox("Click")
[code]...
I have an ASP.Net web user control which represents a single entry in a list. To allow users to reorder the items, each item has buttons to move the item up or down the list. Clicking on one of these raises an event to the parent page, which then shuffles the items in the placeholder control.Code fragments from the list entry:
Public Event UpClicked As System.EventHandler
Protected Sub btnUp_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Handles btnUp.Click
[code]....
It originally looked in testing like every other time the value for sender (verified by its properties) that reaches UpClicked is of an adjacent ListItem, not the one I've just clicked on - the first click is always wrong, then the second for the correct control.At present,testing appears to show that the button's click event is just being ignored every other time through.Breakpoints on the click events within the control simply aren't being hit, though the events are definitely being established.
I'm working on a Windows Service that watches a few folders for changes, creations, and deletions. It all works well with the exception of one watcher that watches a single file (XML File with Configuration Settings) for minor changes.
I tried taking the Windows Service code and putting it into a simple windows application with start/stop buttons for the filesystem watchers and stepped through it. It never detects the file change of the XML config file. The changes are indeed occurring and the "Date Modified" of the file is updating.
XmlEventReferences = New System.IO.FileSystemWatcher()
XmlEventReferences.Path = "C:XmlReferences"
XmlEventReferences.Filter = "*.xml"
[Code].....
I want to write an event that will simply display something when it is raised. I have never really worked with event driven programming before and am just trying to get a simple example working. It is not yielding any errors, but when I switch to debug mode I can see that the event it not raising correctly.
[Code]...
I have a user control named "LettersDropControl". It has a dropdown list. I am using this control in a aspx page. When I change the selected item it is not calling the ddlLetters_SelectedIndexChanged event handler? What change I need to make in order to execute the code in ddlLetters_SelectedIndexChanged event handler?
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="LettersDropControl.ascx.cs" Inherits="MSAJAX1.LettersDropControl" %>
public partial class LettersDropControl : System.Web.UI.UserControl {
private string selectedLetter;
public string SelectedLetter {
[Code] .....
The event handlers in my parent class are never called though the events are raised in the child class.
The Code:
Public Class childForm
Public Event checkboxchangedEvent(ByVal checkbox1 As Boolean, ByVal checkbox2 As Boolean)
Private Sub checkboxchanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged, CheckBox2.CheckedChanged
[code]....
I have an MDI application that can either run in TABBED or WINDOWED mode. When a user selects something from the menu a form is shown. All menuItem clicks pretty much look the same:
Dim frm As New <SomeForm>
frm.MdiParent = MDIParentForm
frm.Show()
[code].....
I have a test class with an implementation similar to this:
public class MyObject Public Event testEvent(ByVal duh As Boolean)
Public Sub New()
'some code here
End Sub
[Code]...
I discovered that an event raised (directly on indirectly) in the constructor cannot be handled outside the very class. To prove if that was the actual problem, I wrote a simple exemplary app.
Class with the event:
Namespace Utils
Public Class A
Public Event Test()
Public Sub New()
CallTest()
[Code] .....
The reason of such behavior became quite obvious after writing those pieces, but maybe there is a way to omit it?
In a list of timers, how do I determine the index of the item that elapsed without having to iterate the collection as shown below (e.g. can I pass a paramater to OnTimedEvent, or can the collection raise an event to say which item fired???). It's the individual timer index that I need as I'm using it to refer to something else.
(I wont know how many items I'll have in the list in advance so I can't create an individual event handler for each timer - I don't think I should even if I did).
Public Class Form1
Private _timers As New List(Of System.Timers.Timer)
Private Sub Form3_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[code]....
I'm new to VB and relatively fresh in programming in general. I'm trying to write code to make a label flash red. The method involves using a timer. Problem is, it flashes, but I can't figure out how to make it stop. xD Here's my
Private Sub SeleneExplainsToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SeleneExplainsToolStripMenuItem.Click
lblNumbers.ForeColor = Color.Red
Timer1.Enabled = True
AddHandler Timer1.Tick, AddressOf OnTimerEvent
End Sub
[Code]...
I want to raise an event from a non-UI thread where the event will be handled by the UI. Currently, I have to use .Invoke in my methods (which updates UI) called from the event.
How can I raise the event, similar to Background Worker's progress update event, where I don't have to specifically do an .Invoke for UI updates?
Do I wrap the event with a delegate or something? Sample code will be fine though, if the explanation was tedious.
I have a central page loading child controls into a container in a Silverlight Project.Problem is events like button click events are fired twice after processing the child forms.Suspect it might have something to do with a double initializecomponent??
Private Sub btVolgende_Click(ByVal sender As Object, ByVal e As System.Windows.RoutedEventArgs) Handles btVolgende.Click
Select Case Stadium
[code].....
I have a User Control that has been added to the page dynamically. When I click a button on that user control[cod]e...
View 2 RepliesI want to know what the Event has raised in a multi handler.
[Code]...
I'm trying to capture the initial value of a listbox immediately after it's clicked on, and before the SelectedIndex is changed. The following was taken from: MouseDown in WinForm ListBox Kills SelectedIndexChanged, converted to VB. The ListBoxComponent Class is in a Component that shows at the top of the Toolbox.
Public Class ListBoxComponent
Inherits ListBox
Public Const WM_LBUTTONDOWN As Integer = &H201
Public Event PreSelect As EventHandler
[code]....
is it allowed to use more than one Sub to handle the same event ? For example , may I have 2 separate subs to handle the Load event of a form ? Will they fight each other ?I have tested it and it seems to work fine , nevertheless I thought I'd ask you . In case you wonder , there is no great deal , I just want to copy the same lines of code in more forms so I am doing it just in favor of the looking aspect .
View 5 RepliesI have referred DLL in my project. I have to handle the event from DLL in VB.net code. I guess we can do using WithEvents. Can you give me complete picture?
View 2 RepliesI have a problem to handle an event on a custom control a have on a form.... So first i made a custom control that is just a groupbox with some labels and txtboxes. That control i add dynamically to my form like this (Baycontrol is the name of my control)
Declaration
Code:
Friend Bay(29) As BayControl
Add the controls to Form
Code:
For Simindex = 0 To 29 'Me.Bays - 1
[Code].....
I have been reading up on this, but I can't get it to work for me. I am reading in comma delimited text into a three-column datagridview control. The third column is a combo box which only accepts certian values. If the data being imported into col 3 is not in the combo box list I get an error that tells me to handle the data error event.trying to capture that error and get rid of the default error message box. I am working with a Try/Catch statement, but it doesn't seem do anything.
Do Until fileReader.EndOfStream
stringLine = fileReader.ReadLine()
If Not stringLine.StartsWith("'") And Trim(stringLine) <> "" Then
[code].....
I have a mouse click event for one of my controls. I then change the text of that control to something. I also have several other textboxes and want to do the same. How can this be done? I thought maybe this:-
Private Sub txtTitle_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles txtTitle.MouseClick, txtTitle2.MouseClick
End Sub
My problem is how do I determine which has triggered the event (title1 or title2).
I use VB.NET 2010 I have created a user control which holds a few textboxes, where the user can find articles. This user control is added to several Forms (where ever the search is needed). I have to handle the key down event of the user control, but it isn't working... The usercontrols's Key_Down Event is never fired. - I have set KeyPreview of the form to true, then the Key_Down of the Form is fired.
View 6 RepliesI cannot Unresolve a post.I have a datagridview control with a combo box. The user loads data from a file into the control. If there are errors (the element in the combo box column is not in the combo box list) I would like to:
1. capture the row in which the error occurred, and store it in code/memory
2. change the cell backround to red (this is not that important)
3. continue without a message at the time of the error
4. post a message with all of the errors after the load is complete
I am using the code staight out of the Microsoft example to try to figure how to do this, but it is not posting any messages when I load bad data, so I am not getting any smarter from the example.[code]
I am using the Event Handler below for the Enter Key Press Event, it is running when ever any of the keys is pressed. This is not so much a problem when the app. is running, unnecessary yes. It is giving me problems when ever I am Debugging using Breakpoints. How can I change the Handler so it only runs when the Enter Key is Pressed, doing away with the If statement?
Private Sub Form1_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles Me.KeyPress
If e.KeyChar = Chr(Keys.Enter) Then
'Different code blocks will run here depending on what
'TextBox or Label is selected.
End If
End Sub
I have an event in a module, like this:
vb.net
Module Module1 Public Event Event1(Value as Boolean)End Module
I want to be able to handle this event from different forms. This is what I tried to do...
vb.net
Public Class Form1 Private Sub Event1Handler(Value As Boolean) Handles WindowsApplication1.Event1 End SubEnd Class
But I get a squiggly line under WindowsApplication1 that says Handles clause requires a WithEvents variable defined in the containing type or one of its base types. I tried to swap Module1 in, but same thing. I tried without anything in front of Event1, but still nothing.
I'm needing to make something to ALWAYS replace a "." to "," in all textboxes...
That's what I'm doing, and it's working:
Private Sub Timer1_Tick(sender As System.Object, e As System.EventArgs) Handles Timer1.Tick
For Each myControl As Control In Me.Controls
[Code]....