I want to write an event that will simply display something when it is raised. I have never really worked with event driven programming before and am just trying to get a simple example working. It is not yielding any errors, but when I switch to debug mode I can see that the event it not raising correctly.
[Code]...
I am making a function of an application that when a function is called the application will close all processes that are owned by the user and were started after a specific point. My thoughts on this would be to trigger an event in my application every time a process is started and ended, and only if the processes is owned by the user, the event should get information (e.g. the process ID, name, etc) about that process and add or remove that information to/from an array depending on if the process starts or ends. Then when a function is called end all the processes in that array.
[Code]...
This is the abstracted code for simplicity.
Public Class Form1
Dim WithEvents bt As New Button
Private Sub Bt_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt.Click
MsgBox("Click")
[code]...
I have an ASP.Net web user control which represents a single entry in a list. To allow users to reorder the items, each item has buttons to move the item up or down the list. Clicking on one of these raises an event to the parent page, which then shuffles the items in the placeholder control.Code fragments from the list entry:
Public Event UpClicked As System.EventHandler
Protected Sub btnUp_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Handles btnUp.Click
[code]....
It originally looked in testing like every other time the value for sender (verified by its properties) that reaches UpClicked is of an adjacent ListItem, not the one I've just clicked on - the first click is always wrong, then the second for the correct control.At present,testing appears to show that the button's click event is just being ignored every other time through.Breakpoints on the click events within the control simply aren't being hit, though the events are definitely being established.
[code]But even here it seems the handler isn't registered until after New has completed.However, in real life the event is raised within code that's semantically part of the object initialisation, and I'd really rather not have to create some Initialize function.
View 2 RepliesI'm working on a Windows Service that watches a few folders for changes, creations, and deletions. It all works well with the exception of one watcher that watches a single file (XML File with Configuration Settings) for minor changes.
I tried taking the Windows Service code and putting it into a simple windows application with start/stop buttons for the filesystem watchers and stepped through it. It never detects the file change of the XML config file. The changes are indeed occurring and the "Date Modified" of the file is updating.
XmlEventReferences = New System.IO.FileSystemWatcher()
XmlEventReferences.Path = "C:XmlReferences"
XmlEventReferences.Filter = "*.xml"
[Code].....
I have a user control named "LettersDropControl". It has a dropdown list. I am using this control in a aspx page. When I change the selected item it is not calling the ddlLetters_SelectedIndexChanged event handler? What change I need to make in order to execute the code in ddlLetters_SelectedIndexChanged event handler?
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="LettersDropControl.ascx.cs" Inherits="MSAJAX1.LettersDropControl" %>
public partial class LettersDropControl : System.Web.UI.UserControl {
private string selectedLetter;
public string SelectedLetter {
[Code] .....
I must be missing something really basic, but I just can't figure this out. I have a module (declared as a Module, i.e. a VB "static class") and I have an event declared in it, and places to raise the event. But I can't figure out how to handle the event.
Let's call the module MyModule with an even MyEvent. Like so:
Module MyModule
Public Event CallHelp()
Sub ExamineStuff( ByVal input As String)
[code]....
The event handlers in my parent class are never called though the events are raised in the child class.
The Code:
Public Class childForm
Public Event checkboxchangedEvent(ByVal checkbox1 As Boolean, ByVal checkbox2 As Boolean)
Private Sub checkboxchanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged, CheckBox2.CheckedChanged
[code]....
I have an MDI application that can either run in TABBED or WINDOWED mode. When a user selects something from the menu a form is shown. All menuItem clicks pretty much look the same:
Dim frm As New <SomeForm>
frm.MdiParent = MDIParentForm
frm.Show()
[code].....
I have a test class with an implementation similar to this:
public class MyObject Public Event testEvent(ByVal duh As Boolean)
Public Sub New()
'some code here
End Sub
[Code]...
I discovered that an event raised (directly on indirectly) in the constructor cannot be handled outside the very class. To prove if that was the actual problem, I wrote a simple exemplary app.
Class with the event:
Namespace Utils
Public Class A
Public Event Test()
Public Sub New()
CallTest()
[Code] .....
The reason of such behavior became quite obvious after writing those pieces, but maybe there is a way to omit it?
In a list of timers, how do I determine the index of the item that elapsed without having to iterate the collection as shown below (e.g. can I pass a paramater to OnTimedEvent, or can the collection raise an event to say which item fired???). It's the individual timer index that I need as I'm using it to refer to something else.
(I wont know how many items I'll have in the list in advance so I can't create an individual event handler for each timer - I don't think I should even if I did).
Public Class Form1
Private _timers As New List(Of System.Timers.Timer)
Private Sub Form3_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[code]....
I'm new to VB and relatively fresh in programming in general. I'm trying to write code to make a label flash red. The method involves using a timer. Problem is, it flashes, but I can't figure out how to make it stop. xD Here's my
Private Sub SeleneExplainsToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SeleneExplainsToolStripMenuItem.Click
lblNumbers.ForeColor = Color.Red
Timer1.Enabled = True
AddHandler Timer1.Tick, AddressOf OnTimerEvent
End Sub
[Code]...
I want to raise an event from a non-UI thread where the event will be handled by the UI. Currently, I have to use .Invoke in my methods (which updates UI) called from the event.
How can I raise the event, similar to Background Worker's progress update event, where I don't have to specifically do an .Invoke for UI updates?
Do I wrap the event with a delegate or something? Sample code will be fine though, if the explanation was tedious.
I have a central page loading child controls into a container in a Silverlight Project.Problem is events like button click events are fired twice after processing the child forms.Suspect it might have something to do with a double initializecomponent??
Private Sub btVolgende_Click(ByVal sender As Object, ByVal e As System.Windows.RoutedEventArgs) Handles btVolgende.Click
Select Case Stadium
[code].....
I have a User Control that has been added to the page dynamically. When I click a button on that user control[cod]e...
View 2 RepliesI want to know what the Event has raised in a multi handler.
[Code]...
I'm trying to capture the initial value of a listbox immediately after it's clicked on, and before the SelectedIndex is changed. The following was taken from: MouseDown in WinForm ListBox Kills SelectedIndexChanged, converted to VB. The ListBoxComponent Class is in a Component that shows at the top of the Toolbox.
Public Class ListBoxComponent
Inherits ListBox
Public Const WM_LBUTTONDOWN As Integer = &H201
Public Event PreSelect As EventHandler
[code]....
I have a "partial" class in VB.NET. Half of it is auto generated by a code generation tool. That half implements INotifyPropertyChanged, so any properties in that part of the partial class raise the PropertyChanged event.In my "custom" part of the class, I declare another property that depends on one of the properties in the auto-generated side. Therefore, when that auto-generated property changes, I also want to raise a PropertyChanged event on my custom property that depends on it.
If I go into the generated part of the class and raise the event there, that will get overwritten if I ever re-generate that part, so I don't want to do that. I would rather add an event handler in my side of the partial class that checks if the generated property changed, and if so, raise another event for my custom property.
[Code]...
I'm assuming it's because normally you'd use the WithEvents keyword to tell the compiler that you're subscribing to events from that object. I don't have a clue how to do this inside of the class that's actually raising the event, or if that's even possible.
I need a simple system that allows one process to check if another process is running (I think I can do that fine using Process.getProcessByName or similar) and then trigger an event in that process assuming it is.When I say trigger an event I do not mean that literally. I simply need to trigger a sub in the first process from the second.I know that IPC like this would normally be done with pipes or remoting or something like that but I have no experience with these and am looking for a quick solution, so unless these can be used relatively easily to solve this I am looking for an alternative.
View 2 RepliesI need to Create Calender w/Very Basic Event Entry. Any suggestions on how I would go about this. I have seen some controls to do this, but I need to do this without buying anything.
View 1 RepliesI'm trying to write some code that stops and waits for an event then continues execution. I want execution to wait for a mouse event and then continue. I can't just put the code to be executed after the event directly into the Click handler, because many different sections of code need to stop and wait for the event.
[Code]...
I am trying to display *.rpt file in visual basic submit form, how would I do that? I have Report2.rpt and Form1.vb, I like to call Report2.rpt when submit button is clicked, it will then show the report on screen.Private Sub SubmitButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SubmitButton.Click.[code]And also how do I get the date to be queried in my crystal report, I don't want all records, I just want the records in between fromDate and toDate.
View 2 RepliesMaybe my questin was too impossible to unerstand, so I figured out how to ask it in more simple way. I suppose it can be best done in Visual Basic simplified code.
[Code]...
So question is how to describe in Visual Basic [Escape_key_was_pressed] function? When user don't hit Escape key, then program must NOT STOP for asking user keypress[Escape_key_press], it must go on with clicking on desktop to the end of program. SteelAce
I am learning visual basic. I have created a form for a calculator. I have placed buttons for plus, minus, division, multiply etc. The programme is working for clicing on buttons i.e. when I want to add two nos. I accept 1st no. from text box then I click on "PLUS" button then I accept 2nd no. When I click on "Equal" button the result is displaying on textbox. But I want to write code insted of clicking on "PLUS" button if press " + " key on keyboard and for "Equal" button, if I press " Enter " key on keyboard, The result for adding two number should display on textbox. I want code for both click event and keypress event.
View 2 RepliesI was wondering how to get a certain data from a MS database and display in a label. Example(Database entries)
[Code]....
The name will be displayed in the label depending on the year and number typed in two text boxes. So if typed 2009 and 1001, the label should display name2. I don't have any background on SQL. The only thing I did for now is that I added the database in the data sources and added a TableAdapter.
So im using the inno installer to set up my project and i found a nice script that will check and download 3.5 framework, but can't get it to work for 4.0 so my question is would i be able to compile my project in 3.5 and everything still work correctly?
My program just uses basic math functions and display the data in datagridviews. It uses webbrowser and other toolbox options. It doesn't use the registry and only creates one txt file.
I am using Visual Basic 2010
i have three tables
Table Names are Students, Customers, Members
fields in Students Table Like Below
StudentID
StudentName
StudentAddress
StudentMobile
[Code].....
how to display Table Contents in ContextMenuStrip using visual basic 2010
i have a Table "Students" field names are "StudentsID and StudentsName" have 20 Records
now i want to display All students name in ContextMenuStrip work like a popup box