I have a user control where in the user control that there are 3 other controls for the PictureBox, button1 and button2.for the PictureBox control I want to resize when the user control in he will change length and width.button1 and button2 whereas only change in the position left alone.I include the following examples in resize images before and after.
View 3 RepliesI'm trying to make a program with transparent labels over pictureboxes and when I set the label Parent to the PictureBox the position of the label changes.
View 2 RepliesHow Do I Make It So When You Navigate To A Webpage Using A Tabcontrol The Tab Displays The Document Title Of That Site But Does Not Resize Itself To Fit The Entire Title, It Stays One Size.
View 1 RepliesI would like to accept input bytes or words from the serial port(this part can do using serial port control) and use those values to control position of the mouse on screen to use MSPaint. How can I control the mouse ?
View 3 RepliesI'm starting work updating an UI for one of my company's applications and I'm running into a sticky issue. The parent control contains several panels, each of which can be turned on or off depending on user input.
The final panel in the user control contains another user control which gets resizes according to a toggle switch. Essentially, it "opens" up more information.
While the child control (ChildControl) is docked to Fill inside the parent control (ParentControl), when I add height to ChildControl I can't get ParentControl's height to get updated as well. Currently I'm handling the ChildControl.Layout event in ParentControl but I can't seem to reach that code. To resize ChildControl, I'm calling Me.Height += 200 in ChildControl.vb.
I have a form that I want to have a control box so you can close it at any time but I don't want it to be movable from its origainal position. It opens maximized and I want it to stay maximized. I've tried all the different FromBorderStyle options in properties and I've tried all the SizeGripStyle properties though I can't say I've tried all the combinations possible between those two but whatever I've tried I can always click on the border at the top and then the form breaks free from its starting position and when it does the vertical scroll bar disappears.
How can I have this form stay in place with the vertical scroll bar and the control box and not break free from its starting position if someone clicks on the border at the top? If I try FromBorderStyle None then I don't have control box to close it. I was looking at the form events list and I noticed when I break the form free by clicking on the border that that is a ClientSizeChanged event.
I am trying to dynamically resize labels and position each subsequent label a perdetermined distance from the end of the label that was just generated. My code looks like this:
[Code]...
I want to set control position relative to other control so when i make one control hide then other control move up like this.
View 1 RepliesI have a user control which contains some textboxes,buttons ,labels and comboboxes . I used that control in a form and inside a split contaier.Splitter can be moved by the user. User control is docked as fill.
Now when user move the splitter the user control size is changes as it is dock fill but the inner controls used in that user control looks like fixed in a single place .It are not moving nor resizing .How to do this .Is there any property to perform thisI already know about anchor property but sometimes it causes overlapping of controls so I can not use it.
Is there a way to bind the text property of a control to an expression? I have a user control that I add to a FlowLayoutPanel. You can see I have 4 controls in the FlowLayoutPanel below. The first control is a LinkLabel and the other three are my user controls which are numbered 1, 2, & 3. I'd like to bind the label that shows the 1, 2, or 3 to the user controls index within the FlowLayoutPanel.
If I happen to remove the 2nd user control I want the 3rd user control to now display 2. I could use the FlowLayoutPanel ControlAdded or ControlRemoved events, but wanted to see if I could do some binding first.
I've looked throu all of the SendMessage(messages) but there does not seem to be anything like WM_GetPos.Now I can accomplish through AHK with ControlGetPos, but for the life of me I can not figure out what Win API function they are calling to accomplish this.We have an order entry system we use, that I am trying to automate the printing of our reports (we have 4 per order form) to save time
View 9 Repliesi want to ask about screen resolution and control resize..how can i make my control, like button, textbox, etc resize automatically within any screen resolution?have you guy ever hear about active resize from url...i want my vb net application look like that so if we use ANY resolution, the application we create will not messedit can strecth..i already try dock, anchor, panel, etc, but it cannot work.
View 3 RepliesI have been searching for code and/or a tutorial on how to proportianally resize controls and fonts. For example if I design a form at 800 X 600 and the user maximizes the form to 1600 X 1200, I need the form and controls to grow to fill the screen almost like a zoom function.
View 11 RepliesI am working on a windows application . I am trying to find if we can resize the monthcalendar control?? if yes, how??
View 8 RepliesI'm a moderate (self taught) skill level programmer, developing a piece of software to display information on a Large-screen LCD Display using VB.Net 2008 in Visual Studio 2008 Pro, this is a WinForms project targeted for the .NET 3.5 framework.I have a WebBrowser Control (docked into a disabled panel on the form) which is used to playback a powerpoint presentation, on a fullscreen, borderless form.I need this to be resizeable/ movable, depending on the other information I need to display. If I just resize/move the control, but looks horrible, so I would like to animate this resizing.The WebBrowser control will be, by default, in the top right quarter of the screen, resizing to fill the screen as and when needed (so the control will need to scale up in size, and move left at the same time).I've tried to loop through a resize in increments, but the browser resize flickers, although the powerpoint inside it appears to look OK. Is there any way to make this a nice, smooth resize, without the flickering?
View 4 RepliesHow do i resize the monthy calander control?
vb.net 2005 Apparently the font size does nothing.
i am stuck with tha control being huge. I would like my calander control to fit inside my designated area and be sure that it stays there.
I would also like to control the actual font size of the displayed calander.
I have the following code, which I use for in another control and it works fine, although the other control is a custom control that inherits from Control.
Public Class MoveableLabel
Inherits Label
Const WM_NCHITTEST As Integer = &H84
Const HTCLIENT As Integer = &H1
Const HTCAPTION As Integer = &H2
[Code] .....
why the title has "(con't)" is because of this Form Resize With Control Sizing... almost named it with another thread on here. And I wanted to post, but it was already a 'Zombie Thread'.Thanks to _HAWK_'s post #11, instead of declaring every control I use. Would declaring it an array (fast guess - Label<Array(how many - 1; aka - X)>) work? ... that was probably Java... My point has probably been made, or can I just do Label.Scale(variable)?I had already set my declaration of the form I need to do this on "Resize". I am not quite at this stage yet, but I see this saving a lot of time asking early.
The +1 extra question is:How can I be able to split of a form in 3 unequal sections? The initial form is 800*600-left side has 2 sections, each 400*300 right side is 400*600.I am already using 3 'GroupBox' and it looks ugly because I have each one colored differently.I looked into Splitter and SplitContainter and TableLayoutContainer.
How to implement resize begin and end on controls the way a Form does. I had the idea that this can be accomplished using windows messages API (WM_ENTERSIZEMOVE and WM_EXITSIZEMOVE) but most of the samples I've seen so far are for windows. The reason for this is because I have a control that needs to re-render an image. The controll is inside a split container. The split container has only the Resize event. Is there any way this can be done?
View 4 RepliesI have a custom control label that I am trying to give all the same properties and functionality to as a regular label. I can change the text, font, and assign the auto size property. However, I cannot figure out a way to make the control re-size correctly. Does anyone have any suggestions or code examples of a custom control being re-sized to fill the entire control?
View 1 RepliesI am staring on the programming world using VB 2008 express edition, mi project is data acquisition software which today is almost ready to go, but I want to add an extra ornament to the digital value display.I am using textcontrol to display numeric values, and the fixture that I would like to add is to be able to resize the control in run mode using the mouse left click hold down on the edge of the control and just move the mouse and the control expand or shrinks, as the same action as when we want to resize any form.
View 3 RepliesI have a Mdi form and I need to put a control on the form which the user can resize. Now I need a container can be dragged by user to increase it's size. The split container will not work in my case as I have childforms and stuff. I want a container whose size can be increased by dragging it on one side.
View 8 RepliesFocus and Resize the Control at Runtime I want to focus and re-size the controls like text box or label at run time using keyboard and as well as mouse. I have attached the image that has control and it is focused and it could be re-size. In that image,background it has grids. I need that kind of grids in my form. From this position of control, I need to convert it to .txt format and print it to the pre-formatted paper.
So i need 4 requirements,
1. Focus and Re-size the controls
2. Grids control (not a data grid view)
3. Data's convert it to .txt format
4. Data's Print to pre formatted paper.
I have added three columns to the ListView control,
listView1.Columns.Add("id", listView1.Width / 3); listView1.Columns.Add("Name", listView1.Width / 3); listView1.Columns.Add("Address", listView1.Width / 3);
Assume the ListView1.Width is "30", then each column should be in event width of 10. Furthermore thereshould only be three columns becuase i have added only three columns. However, when i resize teh form, the listview controls shows an additional column.
How this was added? How do i fix this, so that when i add 3 columns it will have only three columns even when resized the form or not
How do you get it so when you resize the form, the buttons move with the re sized form and they don't just disappear?
View 5 RepliesFirst off I'm using the Extended Webbrowser control from: [URL]
I use the Webbrowser control to access an ESRI web based mapping solution. When the ESRI map is loaded into an IE browser and the browser is resized then the map control resizing accordingly. When my Webbrowser control is resized the map webpage is not resizing properly.
I don't even know where to start with this problem. Is there some event that's not firing in the website? I can't simply refresh the whole website because the user may have panned and zoomed around. I want to just tell the website that the container control (Webbrowser control) is resizing now.
I'm using this control in a application to load the URL of a .jpg image. The thing is that the image is bigger than the control, so I want it to automatically resize the image, as IE does when the same thing happens there, and it even shows a little magnifier glass to restore the image to full size.How can this be achieved? What happens at default is that the image is bigger than the control, so a quarter of it shows and I have to scroll to see the rest.
View 4 RepliesI have a datagridview, a bindingnavigator both of them link to a datasource. i want to ask you how can i control position of CurrencyManager.
I tried but not yet :
[code]...
Private Sub pSalar_MouseDown(ByVal sender As Object, ByVal e As MouseEventArgs) Handles pSalar.MouseDown My problem is that this panel is the parent of labels, and when I click somewhere on the panel, I can't get it to trigger the event. If I remove the line below, it works ok (but then obviously it's not holding any children labels anymore)[code]....
View 1 RepliesHow can i know name of control which is in position of mouse (cursor ).
View 7 Replies