Control Position Of CurrencyManager?
Jul 14, 2009I have a datagridview, a bindingnavigator both of them link to a datasource. i want to ask you how can i control position of CurrencyManager.
I tried but not yet :
[code]...
ADVERTISEMENT
Position Of CurrencyManager Not Changing?
Apr 2, 2011I'm starting to learn about using the CurrencyManager to change the position of data and seem to be missing something because the postion is not changing. look at this code and let me know what I'm missing?
I hard coded the postion in:objCurrencyManager.Position = 1 and used the debugger to step through the code to see what .Position is holding and after the statement executes, the value is still 0 even though there is data in the dataset. I was hoping the textbox would display the data from the dataset located in the 2nd row of the dataset but the position never changed.
[Code]...
VS 2005 CurrencyManager.Position += 0 ?
Dec 17, 2009what the purpose of the following code is:[code]....
What it does appears obvious: it increments the position by 0 (i.e. leaves it unchanged) so it appears that it does nothing-but the vendor included it so I'm assuming there's a reason.From the comments, MyCurrencyMgr is the CurrencyManager for the 'primary table' and the CurrencyMgrCollection should contain CurrencyManagers for 'other tables' but I can't find where any are actually added to it-and whether the other CurrencyManagers exist or not, I still can't see what the purpose of this code is.
Set Control (windows Control) Position To Some Other Control Relative Postion?
Mar 25, 2011I want to set control position relative to other control so when i make one control hide then other control move up like this.
View 1 RepliesVS 2010 Changing Control Parent Property Changes Control Location Position?
Feb 16, 2011I'm trying to make a program with transparent labels over pictureboxes and when I set the label Parent to the PictureBox the position of the label changes.
View 2 RepliesBind Control.Text Property To Control Position In FlowLayoutPanel?
Jun 6, 2012Is there a way to bind the text property of a control to an expression? I have a user control that I add to a FlowLayoutPanel. You can see I have 4 controls in the FlowLayoutPanel below. The first control is a LinkLabel and the other three are my user controls which are numbered 1, 2, & 3. I'd like to bind the label that shows the 1, 2, or 3 to the user controls index within the FlowLayoutPanel.
If I happen to remove the 2nd user control I want the 3rd user control to now display 2. I could use the FlowLayoutPanel ControlAdded or ControlRemoved events, but wanted to see if I could do some binding first.
Currencymanager Is Not Positioned At Item Displayed Combobox?
Jan 28, 2011I have a table databound to a combobox
[Code]...
Finding The Position Of A Control From The Control Handle.?
Feb 24, 2012I've looked throu all of the SendMessage(messages) but there does not seem to be anything like WM_GetPos.Now I can accomplish through AHK with ControlGetPos, but for the life of me I can not figure out what Win API function they are calling to accomplish this.We have an order entry system we use, that I am trying to automate the printing of our reports (we have 4 per order form) to save time
View 9 RepliesGet Control At Cursor Position?
Sep 15, 2009Private Sub pSalar_MouseDown(ByVal sender As Object, ByVal e As MouseEventArgs) Handles pSalar.MouseDown My problem is that this panel is the parent of labels, and when I click somewhere on the panel, I can't get it to trigger the event. If I remove the line below, it works ok (but then obviously it's not holding any children labels anymore)[code]....
View 1 RepliesGet Control In Position Mouse?
Oct 1, 2009How can i know name of control which is in position of mouse (cursor ).
View 7 RepliesGet X , Y Position Of A Control In A Form?
Dec 11, 2009How Can I Get The X,Y Position Of A Control In A Form?
View 3 RepliesMouse Position On A Control?
Dec 6, 2009I have a label (mylabel1) control that is say size 200 by 200. I then add another label (mylabel2) to it as:
myform1.controls.add(mylabel2)
When the mouse enters mylabel1, I want to say change the backcolor as:
Private Sub mylabel1_MouseEnter(ByVal sender As Object, ByVal e As System.EventArgs) Handles mylabel1.MouseEnter
mylabel1.backcolor = color.red
[Code].....
this works fine except that when the mouse passes over mylabel2 which was added to the controls collection, it fires the mouseleave event for mylabel1. Is there a way to do this without having the mouseleave event of mylabel1 having to be checked against the mouseenter event of mylabel2??
I am ultimately going to have a parent container that has multiple children but I don't want the children to effect my changing colors and effects when the mouse has entered the parent.
Forms :: Get Name Of Control At Cursor Position?
Sep 10, 2009How do I get the name of the (topmost?) control at the cursor position? The background: I implemented drag'n'drop from a dgv to a label and need to identify the control where the mouse button is released. I have enabled dropping on the label where the drop is going to take place. However, this label is the parent of say a hundred labels that are created dynamically in codebehind (I use this way to create a "dataview"). Therefore, I need to know which of these "child" labels the user drops the data onto.
I can get the mouseposition without problems (Me.PointToClient(Cursor.Position).ToString), but as I said, I can't get the name/text/ID of the control the user dropped the data on. Also, I ned to get the child control's name/ID/Text, not the parent label of course.In addition, it seems as if I can't select the row I click on in the dgv anymore, after I implemented the DoDragDrop on the CellMouseDown event. Any ideas? Should I use another event?
Set Screen Position For Control(Like Button)?
Oct 11, 2011how i can set screen position for control(Like Button)?
*I'm talking about position(screen), not about location
VS 2008 : Getting The Position Of A Child Control?
Jan 22, 2011In your opinion what API use Spy++ to get the "Rectangle" and "Restored Rect" data of a child control of an external window?I don't think it uses GetWindowPlacement because if I use this API for the main window I obtain the same values of Spy++, but if I use the GetWindowPlacement API to find the position of a control of the window itself, known it Hwnd, I obtain different results as to Spy++ (that are ALWAYS the same results also if I shift the Main window... so I think that are relative data and not absolute data... but they are wrong )
One example:
Spy++ : (620, 473)-(792, 505)
GetWindowPlacement: (615, 450)-(787, 482)
same dimensions... but different pos... and the right pos is the Spy++ pos.
VS 2010 Resize Control + Position?
Mar 28, 2011I have a user control where in the user control that there are 3 other controls for the PictureBox, button1 and button2.for the PictureBox control I want to resize when the user control in he will change length and width.button1 and button2 whereas only change in the position left alone.I include the following examples in resize images before and after.
View 3 RepliesVS 2010 Take Control Of Mouse Position?
Jan 20, 2011I would like to accept input bytes or words from the serial port(this part can do using serial port control) and use those values to control position of the mouse on screen to use MSPaint. How can I control the mouse ?
View 3 RepliesC# - Setting The Cursor Position In A NumericUpDown Control?
Apr 27, 2010I have created a user control tha inherits from the NumericUpDown Control.Is it possible to set the cursor position within the control?I am validating the text OnKeyUp, and formatting it when it meets certain criteria.To do this i have to do me.text = Fomatted(Me.Text), which sets the cursor back to the position 0, i want to set it to the end of the text area.
View 1 RepliesChanging Child Forms Control Box Position?
Apr 6, 2009Well I'm not sure how to describe it so i uploaded an image that has 2 different control box positions.
[URL]
The one on top is set up as Render Mode=System while the other image is set up as Render Mode= ManagerRenderMode
Both applications were developed in VB using VS2005.
Each one has its MDI container and their MainMenuStrip set up..
What property/reason would be causing this? I just created a test program simulating the same case (MDI container with child forms) and everytime i maximized the control boxes appear in the correct position.
Find Cell Position In Grid Control?
Jun 23, 2010I wanted to create a module / tool similar to MS word where user should be able to add controls, resize controls, drag and drop controls.Anyway, I have got lot of references on how to resize control, drag and drop add control etc...my main requirement is i need a way to add grid and should be able to add cells to it. When i resize the grid control, the cell height & width should get extended and compressed accordingly. Also i need to save position of the controls to a text file.Saving positon of other controls is easy but most importantly i need to save each cell position of the grid.
View 2 RepliesCan't Use The Newer DataGridView - Error "BC30002: Type 'CurrencyManager' Is Not Defined"?
May 17, 2011I am developing a VB.NET application in which I use a DataGrid; I can't use the newer DataGridView due to version. But now when I try to compile this, I get the error:
[Code]...
What can I replace this line with? I have read on the internet that since my application should be web-based, I cannot use the Windows namespace. I think what I am asking for is a pretty simple solution, but I am a very new VB programmer. More of my code below.
[Code]...
Cursor - Get The Position Of The Mouse Relative To The Browser Control
May 13, 2010I have a hobby of making webbrowsers. I'm writing a new one, but it has an old webbrowser control in it (CEXWB). This means that I am using IHTMLDocument(s) rather than normal HTMLDocuments. I'm in the process of implementing a ContextMenu, but I need to get the position of the mouse relative to the browser control, so using something like Cursor.Position won't work. The Webbrowser_MouseMove event also won't work. I'm not sure why. I also can't use WithEvents with a HtmlDocument (like in my webbrowser ContextMenu tutorial) as I cannot Convert A System.Windows.Forms.HtmlElement into an mshtml.IHTMLDocument2.
So far, I have this code:
'The event which fires when the ContextMenu for the browser Opens
Private Sub cmenuWB_PopupOpen(ByVal sender As Object, ByVal e As DevComponents.DotNetBar.PopupOpenEventArgs) Handles cmenuWB.PopupOpen
[CODE]...
How I could implement this?
VS 2010 : Get Form To Have Control Box But Not Be Movable From Original Position?
Mar 30, 2011I have a form that I want to have a control box so you can close it at any time but I don't want it to be movable from its origainal position. It opens maximized and I want it to stay maximized. I've tried all the different FromBorderStyle options in properties and I've tried all the SizeGripStyle properties though I can't say I've tried all the combinations possible between those two but whatever I've tried I can always click on the border at the top and then the form breaks free from its starting position and when it does the vertical scroll bar disappears.
How can I have this form stay in place with the vertical scroll bar and the control box and not break free from its starting position if someone clicks on the border at the top? If I try FromBorderStyle None then I don't have control box to close it. I was looking at the form events list and I noticed when I break the form free by clicking on the border that that is a ClientSizeChanged event.
[2005] Position Form2 Directly Under A Control On Form1?
Jan 23, 2009What I'd like to do is position Form2 underneath the Label on Form1 when the "down arrow" button is clicked. (Basically Form2 should have the same "Left" as the Label on Form1, and its "Top" should be the Top of Label1 plus the Height of Label1.) Please see attached images for further clarification. (I did something like this in VB6 with the SetCursorPos API and the Screen.TwipsPerPixelX and Screen.TwipsPerPixelY properties, but I'm sure there is a better way to do this in .NET.)
View 7 RepliesC# :: Restoring A Control's Position And Size Inside The Form At Runtime?
Oct 21, 2010I have a DataGridView in one of my form which at a certain point I resize an change it's position. I would like to be able to restore it to the designer's default position at runtime. I know I could save it before changing and then restoring it later, but I feel like there surely is a way in .NET to just restore a control position to it's default.
View 2 RepliesCan't Control Window Dimensions And Position Of A Word Document Opened From A Form
Nov 23, 2010I am writting a program that aims at filling up bookmarks of a template with data retrieved from a sql server db. The form opens a Word document but I can't control the position and dimensions of the word document. It seems that I can't manage to overwrite MS Word default settings for position and dimensions. I want to be able to display the word document close to the form.Here is the code that I have tried and doesn't work:
Dim
wawidth
As
Integer
[code]....
Cannot Seem To Find A Caret Position Changed Event On The Normal Richtextbox Control?
Oct 19, 2009even Word Pad, when you scroll your Caret (the I-beam for browsing through text) through the text, in the font combobox, the font of the text you are browsing through will be displayed, and when you scroll your caret through a different font, the font will be changed. If you're confused, look at attatched picture.
I cannot seem to find a caret position changed event on the normal richtextbox control - and if anyone can show me a custom component with this it would help me a huge amount.So my basic question is how can i replicate the formentioned function in my own VB.NET program.No code is necessary just constructive suggestions, or links to other projects would be welcome. You don't need to quote the forum rules
Saving Window Size And Position Multiple Monitors Toolbar Position Etc.
Aug 24, 2009I have looking for a tutorial or class that demonstrates more than a trivial example of saving a windows position on closing. The ones I have found don't seem to work on all systems because of:
1. Multiple monitors. (and resolution between those monitors)
2. Toolbar size and position (toolbar is only on the primary monitor, well sometimes)
3. Sometimes the programs dont open on the right monitor they were closed on.
Is there an extensive class or tutorial on all the stuff a programmer needs to get right to have a window size and position persisted between executions?
VS 2008 BindingSource.Position - Event To Fire Only Once After The Position Command
Dec 5, 2010I am using the following code to populate data in Textbox1:
[Code]...
I have few functions assigned in TextBox1_TextChanged event. The problem i am facing is this event is fired twice, once after the Fill command and another after the Position command whereas i want the event to fire only once after the Position command. What should i do?
Avoid Control "wobble" When Resizing Controls According To Mouse Position?
Jul 28, 2009I've got a set of controls in a line inside"FollowTableLayoutPanel1", contained within "TableLayoutPanel2".I have them resizing according to the position of the mouse cursor; the closer the mouse cursor is to the vertical centre of the control, the larger the control is. Because FollowTableLayoutPanel1 has its anchor property set to "Top", it recentres itself in TableLayoutPanel2.It is possible for the recentring of FollowTableLayoutPanel1 to move a control one pixel further away from the mouse pointer, which causes the control to shrink, which causes FollowTableLayoutPanel1 to recentre, placing the control closer to the mouse pointer, which causes the control to grow,which causes FollowTableLayoutPanel1 to recentre, which moves the control further away from the mouse cursor, etc., etc., etc.The end result is that the whole setup judders and wobbles, constantly resizing.Full example code is provided below,and can be pasted directly into Form1 of a new project. Positioning the mouse cursor to correctly show the problem is left as an exercise for the reader :
Public Class Form1
Private Sub myInitializeComponent()
Me.components = New System.ComponentModel.Container
Me.TableLayoutPanel2 = New System.Windows.Forms.TableLayoutPanel[code].....