I Have a c++ program that is already completed but has no ineterface. So What I am trying to do is translate the c++ code over to Visual Basic, which is trickier than I thought. I need to browse for a text file, cross reference that with a csv file which will match IDs and replace in the text file, outputting to a textbox to save
I recently wrote a program that collects information from the network can displays it in a DGV for the user to see. I tested this on networks where I would end up with several thousand items brought back and all worked fine, very little memory increase and once the search had finished the memory usage went back to pretty much what it was before the search, so I assume I have no major memory leaks that I should be concerned about (I'm careful to always dispose of things and clear large variables where possible).
However, a new company has now started using my application and they have several hundred thousand items that my program will find. They reported that they leave the program running its search for a few hours and most of the time it crashes with an Out Of Memory exception. Now I did have my app do some caching of certain information to avoid querying the network more than was necessary so I thought well maybe this is what is causing it but I added an option to turn that off and they say it still happens. So the only thing I can see it being is simply the amount of data that the program is finding and having to store in memory.once my application has gathered information about the items it stores them in a List(Of MyItemClass) and then when the search is complete the items are added to the DGV. So I'm thinking maybe its just the size of this List(Of MyItemClass) that is simply getting too large. Bear in mind that each instance of MyItemClass in this List can have quite a lot of information in it as it has several properties that are List(Of String) that may contain a few thousand strings in some scenarios.How do you deal with such large amounts of data without running out of memory?I'm assuming the only option I have got is to 'page' some of the data to a temporary file on disk once I get over a certain number of items in the List(Of MyItemClass)?
I must have inadvertly messed up my data connection but not sure how to fix it. when I check the table adapters I can view data but when I load the app I get these errors and no data loads, how can I look at this log and make sense of how to fix this?
************** Exception Text ************** System.Configuration.ConfigurationErrorsException: Configuration system failed to initialize ---> System.Configuration.ConfigurationErrorsException: Only one <configSections> element allowed per config file and if present must be the first child of the root <configuration> element. (C:BungeAppsBunge Post InstallerinDebugBunge Post Installer.exe.Config line 7)
Using visual basic express 2010 on windows 7 pro 64b.Solution one CLB is a class library with multiple projects.Solution two WFA is a windows form application with a reference to one of the CLB projects .dll located in the bin release folder (not the debug folder).Problem:When CLB gets modified and build, the WFA shows for the class on the .dll:ype MyClass" is not defineThis problem gets solved by either deleting and adding again the reference or by closing the WFA in which case when reopen the reference is good again.I know that:Solutions with multiple projects dont create a .dll on the debug folder just on the release one.Questions:
I'm a VBA programmer and can do Office integration in Office applications.I'm programming in VB in VSTS 2008 and following these steps to create an Excell application at runtime: [URL] but it is not working.The issue I'm having is when I add the reference, the library is not recognized by VBE intellisense and compiler, so: the code doesn't run.When I use late binding technique and declare variables as objects, the code runs OK, but I don't want that way.I tried adding the references in two different ways:
1 - Menu Project / Add Reference / tab COM / Microsoft Excel 11.0 Object Library / OK
2 - Menu Project / VB Properties / References / Add / Microsoft Excel 11.0 Object Library
I'm using Visual Studio 2010 and .NET3.5. I've created a WCF service application. I'm including two DLLs that contain the types I'm returning. The first method I wrote works both in WCF Test Client and also in a console application I created to test. When I move on to the next method that returns a generic list of a type. It works great in WCF Test Client, but when I update the service reference it acts as if the service is unavailable. All my objects say can't find reference, and I can no longer see it in the object browser. It's like it just disappears. I can still see it in the Service Reference folder. If I go back to the WCF app and comment out the contract and implementation of that one method it work again. I created a local class very similar to the class I'm using from the dll, and the it works. Is there something I'm missing here? Can someone point me in the right direction?
Just downloaded the connector/net from MySQL website, and after installing successfully, I am not able to add a reference to the .dll to continue using the namespaces to establish a connection to a Mysql database on my website.
I am trying to add a reference to a DLL written by a coworker to a project of mine but I am getting this message:
The referenced assembly "SomeDLL" could not be resolved because it has a dependency on "System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" which is not in the currently targeted framework ".NETFramework,Version=v4.0,Profile=Client". Please remove references to assemblies not in the targeted framework or consider retargeting your project.
I have an application that I have in VB Express Edition 2008. I have an MS Access database (Access 2003) that I have created a data reference to one of its tables. The table contains 3 fields ID (Counter), Name and Price (text and double). When my form loads I simply want to read each record in the table and create a variable with the same name as the product name and assign it a value the same as the price in the table. So, record 1 in my table has Prod1 in the name field and 2.59 in the price field. I would like these variables to be created when the form loads and be available until the user exits the form.
It seems simple but I cannot find reference to a similar situation anywhere I have looked.
In the Form_Load routine the following line was generated via the designer:
Me.PricerTableAdapter.Fill(Me.PTODataSet.Pricer) assist if possible.
I need to pass a reference of a class instance to a new form; the newform obtains data from the user to be added to the class instance. How might I do this? Is there a way to pass it as a parameter via the ShowDialog call?
If I try to copy/paste simple tutorials such as [URL], Visual Studio freezes indefinitely and I have to force-close it. If I try to use code like the stuff found here [URL] or even just load up Reed Kimble's XArcade Vengance from this forum, I get this error message:
An error occurred creating the form. See Exception.InnerException for details. The error is: Could not load file or assembly 'Microsoft.DirectX.Direct3D.dll' or one of its dependencies. is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
I installed an application with an Oracle.DataAccess.dll on multiple pc's.The problem is that the location of the reference is different on all pc's.Is there a way to catch this problem or do I have to put the .dll in a central place on the clients pc?
I am trying to follow some tutorials on using DirectSound in VB.NET and I need a reference to Microsoft.DirectX.DirectSound in my project. I have downloaded and installed the Microsoft DirectX SDK (June 2010) but after a restart I have no additional .NET references available to add to my project. I must be doing something really dumb
I have added a reference to the System.Data.SqlClient, but i am not able to use its components while coding, But when i import it in the form class i able to use the component.
So,Is importing a namespace and adding a reference two different things?
I am trying to build a dynamic validator for a data entry application. I want to be able to query a table for the validators relating to the current task and then be able to reference class properties based on the description of the validators returned.
i have Office 2003 on my developer computer, but my client have Offie 2010. i handle the error on access adding the reference of outlook.exe programatically, but when i have to fix the VB.Net solution, i can't find a way to programatically add the reference of Office 2010 when i don't have that version installed on my computer.
I've got a service running (well, it doesn't crash), but when I try to add a Service Reference to it, I keep getting:
Metadata contains a reference that cannot be resolved: 'net.tcp://localhost:55555/mex'. Metadata contains a reference that cannot be resolved: 'net.tcp://localhost:55555/mex'.
If the service is defined in the current solution, try building the solution and adding the service reference again.The pertinent parts of my config file are:
I wrote a routine using a DatagridView that I dragged/dropped from the toolbar--populate it with data and it works great! Now, I need to reference the datagridview from another form. So, I (hopefully, naively, after the fact) declare a Public dgv in a module with the same name as the dgv in the form I'm trying to reference--in the form itself, dgv.rows.count = some number, but when I reference it outside the form I get errors. Obviously my public declaration is not working as hoped--the dgv was working within its form without the declaration so SOMEWHERE it is declared and is not public, but since I dragged/dropped it (i.e. did not instantiate in code).
Is there a way to change reference at runtime ? I am automating Word from VB.Net. I think what I have coded will be same for both Word2003 and Word2007. I used Word 12 Object Library reference(which is of Word2007). So, I want to know how to make it compatible with a machine installed with Office2003. That is, it will check the whether the machine has 2003 installed. If so, use that reference. Otherwise use 2007.
I am currently working on a net scanner project. I have a class called node. I then create a List(Of node) to create the list of nodes I am going to be scanning.
I have a separate thread that scans the nodes using a simple Do Loop.
I then add the nodes to a DataGridView control:
[Code]...
This seems time consuming if there are a lot of nodes in the list. I figure there has to be a better way to do this, or maybe another data structure I should be using?
I had used "DevComponents.DotNetBar2" to make ribbon menus for my applications.I have setuped a new windows last night and add this component in visual studio.But when i put it in my form and i want to run my program give me this error :
I am successfully using a dll reference in VB.NET project. When I export the application to another PC by using a deployment setup, the application does not start at all. I have included the dll file inside the deployment setup so that this file is copied in the application folder. If I remove the dll file from the deployment setup, the application starts normally.I was wondering how I should set the properties of the reference in the .Net project. I am attaching a view of the references dialog where the used reference is highlighted.