VS 2010 How To Keep A Modal Form Displayed Under A Messagebox
Jun 5, 2010
I have a parent form, which can lanch a dialog box. A wrong selection in the box launches a message box with an error message. When the message box pops up, the dialog box disappears, so the messagebox is sitting on top of the parent form.Once the user clicks "OK" in the messagebox, the box disappears, and only the parent form remains.How do I make it so that the dialog box remains when the messagebox is displayed? And also, I want the dialog box to remain when the user closes the message box. The user should have the option to make the right selection in the dialogbox once the messagebox disappears.I tried to hunt for a property for the dialog box to achieve this, but couldn't find any.
Here is the code in the parent form to lauch the dialog box, and to also launch the messagebox, when the user has made a selection in the dialogbox:[code]Am I having this problem because all the code to launch the dialog and message boxes reside in the parent form? If I put the code to launch the messagebox in the dialog box, would that make the dialog box persistent when the messagebox is launched? I am putting all the code in the parent form because it can process the DialogResult.
I have a VB. Net App where I want the user to open a modeless form which contains reference information about items in a select box. If the user double clicks the item selected in the list box a modal form is opened to edit the item.I want the previously opened reference form to remain active/enabled, that is, I want the user to be able to click on it, move it, etc.I was able to get the form to at least show up on the task bar by setting it's "ShowInTaskBar" property to true, however, when it comes to the front the user can still not move it to the side to view all of the Edit Forms information.
I have a section of code in which I want to display a messagebox after a form is displayed... as the form loads. me.show messagebox.show If I don't use me.show first, the messagebox appears before the form is displayed. If I do use me.show first, the form appears, but is not always complete before the messagebox appears. Is there an easy way to poll the form to see if it is done displaying without using a timer?
I'm new in .Net and I have an application with windows form "LOGIN" When users enter the user and password and click "ok", then if user passes validation then I have the code Show(MDIMainMenu) (I'm trying to open an mdi form), but I receive the following error: "Form that is already visible cannot be displayed as a modal dialog box. Set the form's visible property to false before calling Show. Error Number 5"
Am writing a VB.Net app written in VS2010. This displays some reports in several forms. (Am using Crystal Reports though this is incidental to the problem). The user needs to be able to check these, then confirm if he wishes to run the update process or abort. My first idea was to ask the user to reply using a messagebox. But of course this is modal, so the user cannot browse through the reports.
I thought of other options but each seems to have problems: - export the reports as PDFs, then display report in external Adobe Reader Window using System.Diagnostics.Process.Start("AcroRd32.exe", filename). - create a non-modal message box or equivalent. This loses any concept of program flow, so am unconvinced by this.
I am trying to show a message box when an error occurs in a modal dialog window but for some reason the message box is never shown although I know the MessageBox.Show method is being hit. The try catch block is inside of an event handler for a windows form that is being shown as a modal dialog. I know that the event is being fired and that the error is being caught but the message box never opens. I've replaced the MessageBox.Show with another form show and it works fine but I'd rather use MessageBox instead of creating my own error form. I just can't seem to make MessageBox work. Is this a limitation of MessageBox? Here is a simplified version of what I am doing:
I have a parent form that can open a modal form which contains a populated listbox. In the parent form, I can use DialogResult to detect which item in the listbox the user chose in the modal form. But I also want the modal form to return a string that was generated in the modal form.
EDIT: Ok, I suppose some code is necessary? In I would like to return the "longPath" string variable(near bottom of second pic) to form1(first pic).
I am using a Message box with buttons Yes/No. If the user selects a quantity of Dogs a Messagebox is displayed asking if all the dogs have been vaccinated. If the user says yes I want them to be able to proceed. If the user selects No I want the number in the combo box to delete and go back to zero.My code for the button selected is this:
Dim button As DialogResult If button = Windows.Forms.DialogResult.Yes Then btnCalculate.Focus() End If If button = Windows.Forms.DialogResult.No Then
From my login form, and when a correct Username and Password has been succesfull and I get a messageBox saying "welcome to your System" (Picture Below) and when I press the OK button in that MessageBox, I want to open Form3.do I add code to the Underlined code (below Picture), or Do I write a completley different code after the messageBox code.
How to Resolve following Error in .netNon-modal forms cannot be displayed in this host application from an ActiveX DLL, ActiveX Control, or Property Page.
Is there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
Is there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
I've created a form with several controls to specify the inputs to my program. They include TextBox, OpenFileDialog, Button and even a user control for numeric input. When the user clicks the 'GO' button, the program begins it work. Opening several files and processing a bunch of numerical data. This could take many minutes/hours with large datasets.
What I've been trying to do is have another window/form open up and send status information to it for the user to view. The info to be displayed is varied and constantly updated as the program crunches the numbers. Many many programs do just this type of activity.
I attempted to create a second form with a huge TextBox thinking I'd just write stuff to it. I called the .show method within the .click of the 'GO' button and of course the form is displayed but control of the program's execution doesn't return until the form is closed. How to I maintain execution and have a second window/form to display status?
Basically i'm trying making a task manager program for myself. I want to know how I can display a message box and or play a sound when system time = time displayed in listview. I have used a dropdown box for the user to select which option they would like to select - sound or message box to popup. The data for the task will be stored in a listview box. I want it so that when the date and the time is = to the date and time set for the reminder the action will follow.Here is my code so far:
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click Dim notext As String = "" If TextBox1.Text = notext Then[code]....
I'm having an interesting issue that I can't reproduce on a different project, but can consistently on this one. I have no clue what might be causing it, but am hoping that someone may have seen it before.
I have a main form, from which I run a series of checks. On this form, I have a listview control. Because of some issues with the refreshing of this listview control, I had to create my own messagebox. It's just a form that displays some text ( it also happens to look nicer than MsgBox; in my opinion, anyways ). It's been working great for months, until recently.
My problem is that on my main form's load event, I run this check, which returns an error within a try/catch block. I then call my custom messagebox with a message. It in turns calls it's ShowDialog() function.
In any other situation ( after the main form has been loaded ), I have no problems. The messagebox goes on the screen and behaves appropriately ( ie: waits for my input and acts as a modal dialog ( stops execution of my main form's thread ) ). However, on this onload event, my messagebox comes up and goes away almost immediately afterwards.
I've traced it all the way to the showdialog() call. For no explicable reason, it appears to skip right over this call, without me doing anything on the form.
Here's what the inner trace looks like ( when I put a breakpoint on the onclosing event for this messagebox form ):
I have a form in a vb.net windows form application called PolicyRefreshStatus.vb that has a ProgressBar control on it. From the main form called EditPolicy.vb I need to show PolicyRefreshStatus.vb over top of EditPolicy.vb - but the way things are wired I'm controlling the the ProgressBar and it's steps from logic inside EditPolicy.vbIf I display the PolicyRefreshStatus.vb bar using the .show() method things work fine.The problem is if the user clicks back on the main form then PolicyRefreshStatus.vb losses focus. If I show PolicyRefreshStatus.vb as a modal form using .ShowDialog() then execution halts in EditPolicy.vb after the .ShowDialog() statement.
so for example in the code: mPolicyRefreshStatus = New PolicyRefreshStatus mPolicyRefreshStatus.pbMax = mPolicy.ClaimsUpdateMax
I am trying to pass information to parent form from modal form in vb.net winforms application.
1.) I created a copy of a form and displayed it using following code.
dim f=new frmParent() f.show()
2.) Depending on conditions a button on frmParent opens a modal child form and asks for some informations. I used following code for that:
dim f = new ChildForm() f.showDialog()
Both code works fine. When user press saves in child form i need to close childForm and use the user types values in parent form. I know how to close the childform but not sure how to pass info from childform to parent form.
I have designed my app for multiple gridviews. When a user double clicks a row it opens up the data in a modal form and when they commit changes the row gets updated.While they have that modal window open they can not go back to the grid.But I have a alerts/messages window always running (like outlook tasks). As soon as I open the modal window I can not access that tasks window. (Default behaviour)How can I open the modal form and still let the user access/view the tasks window while they work on the modal window.(I tried creating it in a differant thread, but got a lot of cross thread errors so decided to abandon that approach.I thought that 2 modal form can run at the same time as long as they have differant parents. But aparently the main GUI thread pauses as soon as you open a modal window on it.
I have a form where I generate a report on some button click. I need to show another Form in Modal Form, And Place Progress bar on that and Increment the status, from calling form so that when progress bar is running user cannot close the form (where I placed button for showing report). To calculate progressbar's percentage is in the form where button to show report is.
I have a situation where I need to display a Modal Window from a vb.net module and feed the contents to that modal form from the module.I am showing the form , feeding data to it from a class module and trapping the events in it using a timer control from the module.It works fine with Show() method but it doesn't with ShowDialog().If I used ShowDialog() then I was not able to continue with the code followed by it and not able to update any contents in the modal form.
I am using VS2003 version.Is there any workaround to this?
I want to open a form as modal without using showdialog()Problem with showdialog() is we can not open the form as mdi child with it. i want to open few forms as modal but as mdi child forms. but i want to make sure user cannot go anywhere else without closing thst form.if we set parent form enabled = false then i can not set it as mdi child otherwise that form also becomes enabled=false.
if we write showdialog() then so many form icons will appear on taskbar. it we open as mdi child then only one icon appear i don't want to appear so many icons on taskbar so i want to open as mdi child but as modal
for eg. Mainform = mdi form from mainform open formA = as mdi child of main form (but modal) from formA open formB as child (modal) from formB open formC as child (modal). if i use showdialog() then so many form icons on taskbar. h2007
I have a situation where I need to display a Modal Window from a vb.net module and feed the contents to that modal form from the module.I am showing the form , feeding data to it from a class module and trapping the events in it using a timer control from the module.It works fine with Show() method but it doesn't with ShowDialog().If I used ShowDialog() then I was not able to continue with the code followed by it and not able to update any contents in the modal form.
As part of my design for a re-write of some vb6 code, i've got some business rules that check the data being entered. These rules run on the business layer, but if they find any data that is incorrect, they need to display a modal form showing the 'violation' (or could be a warning, a question or some information).
So what i'm after doing is to somehow display a modal form in my presentation layer triggered by my business layer.
The only solution i've come up with is to raise an event to get the modal form displayed, catch the event in the presentation layer and display the form (all items on the form would be bound and so would display the correct information). Problems with this is that i would then have to put the code to sleep in the business layer until i got a responce from the presentation layer.
All of my forms are MDI children. I have one form that is collecting input parameters for a report. One of the parameters needs to come from another form. For the life of me, I can't get it to work.
[Code]...
I have to message box code just to verify the selection. glbPart is just a hand off parameter to tell the frmVendorList code to come back to this form rather than where it was origianlly programmed to go.I tried a do until glbVendor <> "", but that put me into a death loop and I never got to select a vendor from the vendor list form. Obviously, the easiest would be if I could make frmVendorList Modal, but I can't see how to do that once it's been created modally.
I have a form with a browser inside. When loading this form I set the browser.navigate to a url.Now to display this form I used the: form. ShowDialog()to have the form modal (which is what I want).But now when I close this form and reopen it, the browser doesn't refresh (the navigate doesn't start)this is beacuse closing a Showdialog() form doesn't unload it from the memory. To empty the memory I used the.[code]It closes and when reopened it reload the page, but it's not modal anymore and also closing the main form doesn't close this form.So what I would like is to have the form with the browser modal, but every time I load it, it should navigate to the url set.
