VS 2010 Subroutine That Switches Focus To Textbox When TabPage2 Is Selected
Feb 3, 2012
I currently have a subroutine that switches focus to a textbox when TabPage2 is selected. This works fine. [code] However, this doesn't prevent the Textbox from losing focus when TabPage2 is clicked on even though it's the active tab.I have a single button on that tab that disables the textbox if clicked using this: [code] Apart from that button being clickable, I would like the textbox to never lose focus as long as TabPage2 is the active tab.
View 3 Replies
ADVERTISEMENT
Nov 30, 2011
i want to give focus to a textbox after a node is selected in treeview and also keep selected node higlighted?
View 3 Replies
Apr 13, 2011
I have a form that has mutiple buttons and textboxes. When the form is loaded, I want to set focus to a button as well as a textbox so when the person presses the Enter key the actions within that button must be processed.
[Code]....
View 2 Replies
Nov 30, 2009
i have a drop down box, with 2 Options Yes and No,what i want to do is
if questBox = Yes
do this
else if questBox = No
do that
end if
but not sure how to do it.
View 1 Replies
Jun 13, 2010
Am I in BrainFart mode???? The debug looks correct but the textbox text is not selected in the UI. Windows 7?
[Code]...
View 1 Replies
May 31, 2012
Bit of a strange question but I have a refresh button which clears my screen but after clearing the screen the textbox2 get selected (even though its readonly) so would it be possible for no control to get selected or textbox1 to get selected after i have hit refresh?
View 2 Replies
Nov 7, 2010
how to Get text from Selected text focus without my application
View 2 Replies
May 6, 2009
I am working on a form that allows the user to open a plaintext file into a rich text box.The user can search for a word using a textbox and a find button. The word is then highlighted. I cannot figure out how to keep the word highlighted or selected when I type in my replace box or click anywhere else on the form, the word is no longer selected. have a replace button, which will replace any single instance of a word. But my replace all button is supposed to replace all of the words, and count the number of replacements it makes and display that number in a message box
Public Class Form1
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[code].....
View 5 Replies
Jul 1, 2009
when clicking a button, the current date is inserted into a textbox and the focus is transfered to the textbox.
the problem is that Textbox15.focus() select the text inside the textbox. i wish to give that control the focus but place the cursor at the end of the text, with no selection.
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
TextBox15.Text = TextBox15.Text & DateTime.Now & " "
TextBox15.Focus()
End Sub
View 2 Replies
Jun 7, 2011
My problem is I have a data grid in Visual Basic, it works fine but as the columns extend past the width of the window I needed a scroll bar. This is where the problem arose. When a column past the 4th is clicked the scrollbar will shift to give it focus. As there are check boxes here they are constantly clicked and when they are the scroll bar shifts but the button isn't checked and must be clicked again. I was hoping there was a way to disable this Auto focus so clicking a column will not cause the scrollbar to move.
View 1 Replies
Jul 18, 2009
Is there any way to remove the textbox's focus when mouse is clicked in the textbox? the blinking focus in the textbox is not needed for kiosk system. so i try remove it with
[Code]...
View 2 Replies
Dec 7, 2011
Is that possible to Hide TabPage2 in TabControl1?
View 2 Replies
Oct 12, 2009
I have a datagridview(dgv) with a DataGridViewComboBoxColumn(colLocation)
colLocation.AutoComplete = False
colLocation.HeaderText = "Stored to"
colLocation.DataSource = DB.getLocation()
[code]....
I added the colLocation to dgv."descirption" contains Unicode characters. I can see the comboBox correctly and choose the item.The problem is when the comboBox lost the focus, the value is changed to first item of the comboBox.
Updated:I found out that the ComboBox doesn't change the data when the DisplayMember is in English characters. It changes only when the DisplayMember is in Unicode chracter.
View 3 Replies
Feb 16, 2010
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code].....
View 4 Replies
May 20, 2011
I have a program that has checkboxes on tabpage1 and tabpage2. On the form is a StatusStrip1 with labels that have images. All labels are initially hidden.As I navigate the database, I want the the checkboxes that are checked to make their respective StatusStripLabel visible. I have tried to do this using the checkbox_changed like so:
If Pregnancy.Checked = True Then
PregnancyStatusLabel.Visible = True
Else[code]....
This works well for the checkboxes on the first tabpage but I have to click on tabpage2 before those checkboxes will display their StatusStripLables.How can I get them to all display without having to click on tabpage2 first?
View 1 Replies
Jun 22, 2009
I have 4 tab pages on a form. and on each tab page a datagridview witch is connected to a specific table from a database located in Microsoft sql server 2005. I am wondering if it's posible to automatically open the tabpage2 when I click on a specific row in the tabpage1..
View 1 Replies
Feb 11, 2010
I am building an app. that needs some input from the user, the user will have to move a (selected textbox) by clicking a button. The TextBox will have to move 20 points down or up from corent location by clicking a button.
View 10 Replies
Oct 25, 2011
Basically, I have a form with about 15 text boxes. Most are in different tab pages. By default, text boxes allow anybody to copy and paste by using keyboard shortcuts.I added a tool strip up top and make the "Cut", "Copy", and "Paste" buttons. What I want to do is make them work for whichever text box was last focused. So if I click the Cut button on the tool strip, it will cut the text of the
last text box that was focused.
Example:I open the program and type in TextBox1. Then I type in TextBox2. I want to copy the contents of the last text box by using the Copy key at the top, so I click that and it copies TextBox2 as it was the last focused textbox.
Like I said, I'm not fully sure how possible this is as I do have many. The whole reason I have the tool strip is for users that prefer using a mouse for everything rather than keyboard shortcuts.
Visual Basic for Applications (VBA)
Visual Basic 6 (VB6)
Visual Basic Script (VBS)
Convert C# to VB
View 4 Replies
Dec 12, 2010
For validation of a textbox i am using :-
Private Sub t4_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles t4.LostFocus
If Not IsNumeric(t4.Text) Then
[code].....
View 1 Replies
Mar 3, 2009
I am writing a control in WPF that draws a shape on a form and then draws dimensions of this shape. These dimensions are editable so they are shown in a text box. When the user changes a dimension in a text box the shape is updated. I am updating the shape when the textbox showing the dimension loses focus i.e. as soon as the text box loses the focus the shape and all the dimensions are redrawn.
A text box loses focus in one of two ways - either when user presses tab key or when user clicks in another control outside the text box. My problem is that when user presses tab key or clicks somewhere else outside the text box the whole control is redrawn and the focus is not set to the next control where it should be. This is really annoying because tabs stop working altogether and to set a focus using mouse the user has to click twice.
An image of my control is shown below
View 1 Replies
Jan 19, 2011
I have a form with + 50 controls and with key numeric screen to write in only 5 textbox of this form.I am using this code to write in these textbox using key numeric screen:[code]I need to know which of these 5 textbox had the focus before touching the numerical button.I have seen this code from this post Find out the control with last focus to find last focus:[code]But how I do it in a form with + 50 controls (Controls of many types: buttons, checkbox, combos, textbox, etc.) ?
View 2 Replies
Oct 27, 2009
Suppose I have 5 texboxes on my form,named Textbox1,Textbox2 & so on.I want that when the form load,curor is on Textbox1.I write
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
TextBox1.Focus()
End Sub
But its not working?
View 3 Replies
Jun 5, 2011
I use visual baisc 2008 if i use "mouse click" or "use arrow keys " in the datagridview1 then i want that always the focus in on the textfield => Number_Pieces.text.[code]
View 2 Replies
Aug 28, 2011
In my project exercising the PrintDocument Control, I want to set the font of one of 5 text boxes, Print location, etc depending upon which textbox has focus. I was hoping to loop through a text box array until the box with focus is found and use a vb6 trick like 'If tb(i).gotfocus then SetFont(i)' but the 'gotfocus' property seems to be missing in vb.net.Although I could use a button click or mousedown event
View 4 Replies
Mar 23, 2012
I have a few textboxes for inputing values in, but i want a textbox to prompt me if I have made a mistake inputting values, as well as setting focus on that textbox with the mistake, how do I go about doing that? So far, I have[code]...
View 1 Replies
Apr 24, 2009
When the form loads, I query the dataset, and populate the dataGrid with initial values. My problem is that I cannot set the focus to the textbox. I have done the obvious (textfirstname.focus()), in the form loaded event. (and yes, I'm attempting to set the focus AFTER I have dealt with querying and filling my dataGrid).It seems that no matter what I have tried, the cursor always begins in the first row, first column of th
Private Sub Newemployee_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
TxtFirstName.Focus()
[code]......
View 2 Replies
May 8, 2012
I am entering a values into another textbox and I want it to surrender Focus to another textbox if the value I have entered is the same as the one in the database.However what is happening is that if the value is the same as in the database the cursor just disappears and it does not give focus to the control that I want it to give focus to. Any ideas on how I can correct this.
Private Sub txtProducedAt_TextChanged(sender As System.Object, e As System.EventArgs) Handles txtProducedAt.TextChanged
Dim iSql As String = "SELECT ID,SiteName FROM Sites WHERE SiteName = '" & txtProducedAt.Text & "' "
Dim da As New OleDbDataAdapter(iSql, LoginForm1.Conn)
Dim dTable As DataTable = New DataTable
da.Fill(dTable)
If dTable.Rows.Count = 0 Then
Exit Sub
ElseIf dTable.Rows.Count > 0 Then
txtProducedAt.Text = dTable.Rows(0)("SiteName").ToString
txtAccountNumber.Select()
End If
End Sub
I've tried putting code into the tabindex changed event but its not doing what i want and also in the lostfocus event
Private Sub txtProducedAt_TabIndexChanged(sender As Object, e As System.EventArgs) Handles txtProducedAt.TabIndexChanged
Dim iSql As String = "SELECT ID,SiteName FROM Sites WHERE SiteName = '" & txtProducedAt.Text & "' "
Dim da As New OleDbDataAdapter(iSql, LoginForm1.Conn)
Dim dTable As DataTable = New DataTable
da.Fill(dTable)
If dTable.Rows.Count = 0 Then
Exit Sub
ElseIf dTable.Rows.Count > 0 Then
txtAccountNumber.Focus()
End If
End Sub
View 2 Replies
May 8, 2012
I am entering avalues into another text box and I want it to surrender Focus to another textbox if the value I have entered is the same as the one in the database.However what is happening is that if the value is the same as in the database the cursor just disappears and it does not give focus to the control that I want it to give focus to.
Private Sub txtProducedAt_TextChanged(sender As System.Object, e As System.EventArgs) Handles txtProducedAt.TextChanged
Dim iSql As String = "SELECT ID,SiteName FROM Sites WHERE SiteName = '" & txtProducedAt.Text & "' "
Dim da As New OleDbDataAdapter(iSql, LoginForm1.Conn)
[code]....
View 2 Replies
Jun 22, 2010
When a Windows Forms TextBox control first receives the focus the cursor has to be there at first position in the Textbox.
We have tried to resolve the above issue by adding below code in form load event.
TextBox1.SelectionStart = 0
TextBox1.SelectionLength = 0
Now, when a Windows Forms TextBox control first receives the focus, the default insertion (cursor) within the text box is to the left of any existing text. The user can move the insertion point with the keyboard or the mouse. If the text box loses and then regains the focus, the insertion point will be wherever the user last placed it.
But the problem is when some operation is performed in TextBox_Leave event, it will loose the focus. Again when it receives the focus, the whole text is getting selected instead of showing cursor where the user left.
View 6 Replies
Dec 19, 2011
I'm making a desktop application in vb.net. When I click the back button (placed by me) on any form it hides current form and shows previous form but when i go again to the form from which i had hit back button then the focus cue still remains on the back button but I want the focus to be on the first textbox on that form or any specific button on which I want.....How can i achieve this...
I have already used some code to shift focus from one textbox to another when i press enter key...but it doesn't work in the above mentioned case....I'm using vb.net in visual studio 2005...This is the code i'm using for shifting focus among textboxes
Private Sub party_code_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles party_code.KeyDown
If e.KeyData = Keys.Return Then
party_name.Focus()
End If
End Sub
View 1 Replies