When I scroll down to the function shown below, and right click Analogues - go to definition it takes me to the top of the file, and lands on top of the
[Code]...
I got problem regarding declaration of dynamic runtime array declaration Here is my code
[Code]...
I'm writing a simple program to "change" a login. I need to know how to create a variable that lasts past when the program is closed (so the changed login stays and is not reset). Here is my code:
[Code]...
In this
Dim [end] As Point = e.Location
what is the significance of the [] 's?
I have the following form[code]...
and when I run my app, I get a SQL error that tells me that I need to declare a value for '@payperiodstartdate' but I know that that value is declared because the first query runs fine. I am told that the line where the error is is line 59, which is this line [code]...
I'm working on a home project using DirectShow.Net. to learn some VB.net. Most of the examples I've found have all been in C# so I'm looking through code for ideas and converting where I need to. I keep stumbling upon these declarations and I'm unsure how to convert it to a VB.Net statement.[code]Then the second part seems to be assigning the value but as its made up of two parts im unsure how that works?
View 2 Replies[code].....
View 4 Replieswondering about the relatively efficiency of declaring oop variables in the loops, emselves, or declaring them before first use. Here are some examples:Declare early:
Dim ix As Integer
Dim currentNode As System.Xml.XmlNode
For ix = 1 To 100
[code].....
I have noticed in VB.Net that most Dim statements also include an assignment. Eg:Dim myvar As String = "Hello World"As this wasn't possible in VB6 I have always done the following:
Dim myvar As String
myvar = "Hello World"
For i As Integer = 1 To 10
Dim j As Integer = 10
Next
now my question is, Is memory allocated to j every time its executed inside for loop? or only value of 10 is assigned on subsequent iterations?
im sure im mis-wording the concept but here it is anyways. I know in CSharp you can do
el.AppendChild(new UISize(file, "TSize") { CX = 95, CY = 20 });
which declares a temporary bucket variable and then assigns the associate property values to the variable. Which then sends it to the XMLElement AppendChild method. What is this design concept called? What is the conversion to VB.Net? I have tried using my own online utility that does a 90-95% conversion rate from C# <-> VB.Net. It has failed in this instance, and so need a hand-up on what i am looking to do to convert this from C# to VB.Net. I would really like to not have to do a long-declaration of a variable with assignments, if at all possible.
I'm making a call to my DLL file (prototyping 30+ functions), and want to be able to switch between different versions of the DLL quickly while in development. Thus, i want to replace the literal string constant that follows the "Lib" key word, with a variable string constant. In case there's any confusion in my use of the jargon. I am currently able to do this:
[Code]...
How could I create declaration(event) to a variable control in VB .net ? [code]please i need to know how to insert this (declaration) newweb_ DocumentCompleted it's similar to WebBrowser_DocumentCompleted but it's a variable
View 5 RepliesI was looking at some existing code and stumbled across a variable declaration I didn't understand.
public foo as Boolean?
What does the question mark signify?
I've been programming for many years in many languages and I've seen the variable declarations conventions change. With VS 2010 I've noticed you don't have to declare the variable type. I work alone so I can use any method I want. But, someday I may want to sell some of my code so I would like to keep my programming conventions current.
In VS 2010 which of these would be considered the best convention?
Dim srtFirstName = "Bob"
Dim strFirstName As String = "Bob"
Dim FirstName = "Bob"
Dim FirstName As String = "Bob"
Why are static variables set equal to 0 in the declaration when 0 would be the default value of the numeric variable anyway when it's first declared? Not including the "=0" in the static declaration seems to work with no problem.
View 2 RepliesWhen I attempt to run a program I just finished coding I get the following message: "Error 1 Handles clause requires a WithEvents variable defined in the containing type or one of its base types." Looked it up online and still does not make sense to me. If I need to paste code or anything else let me know and I will do so ASAP.
View 8 Repliesim using many variables in my project however, they are most of the time used for 1 or 2 things, so having them loaded up like that forever sounds not very good for performance.Is there a way i can remove a variable after i no longer need it?
for example:
private sub button1_click() handles button1.click
dim result as integer = var2 + var1 / 2
[code]....
I'm trying to populate some file dependant settings from the database. Values I can add no problem but how to set the names as they differ from datafile to datafile?
For Each myRow In SetModDataTbl.Rows
Dim SettingName As String = myRow.Item(1)
Dim SettingValue As String = myRow.Item(2)
'>> SettingName = SettingValue <<
Next myRow
Public Class Form1
Dim x, c, number(0 To 19) As Integer
Dim s As Integer
[CODE]...
The variables in the brackets [example] do not actually have brackets in them in the original code. These are where the issues are. For both variables, it says, "The type for variable [variable] will not be inferred because it is bound to a field in an enclosing scope. Either change the name of [variable], or use the fully qualified name (for example, 'Me.[variable]' or 'MyBase.[variable]')." Now, I'm not entirely sure if this is a stupid question or not, as I'm used to VB '98 because that's what we use in my programming class at High School. let me know why this won't work.
-Note: The intention of this program is to continually loop the generation of numbers for this list until I tell it to stop. Button1 ends the program, Button2 generates the list one time only, Button3 is supposed to loop the generation of the list, and Button4 is supposed to end the loop, but not the program.
In Visual Studio 2010 is it possible to check the state of variables during run time. When a run time error occurs the error is highlighted and you are able to mouse over different variables to see their values when the error happened. I would like to do something similar except without the error.
View 7 RepliesI am trying to create a number of objects depending on the width of a row of an array, is there a way I can change the name of the variable being Dim 'd as I don't know how wide the array will be.
I have been trying something along the lines of:
pseudocode
For x as integer = 0 to UBound(MyArray,2)
Dim Object & CStr(x) As Object Type
Next
global variable can be created during runtime?
View 1 RepliesI'm multiplying X*Y*Z in a loop of 200 interations Y is declared as a constant. A timer can cause the loop to pause for 10 seconds.
During this 10 sexond pause I would like to change the value of Y. It needs to be changed only for this run, not a permanent change which can be done in the declaration.
I have a third party dll. I wish to create a variable to reference to one of the variable in it.so that the value in the class change, my value also change. The senario can be reproduce from the code below.For the code below i wish to get the form to display 2 instead of 1. How can i make my variable test2 always referencing test.testValue?
View 11 RepliesI have a list with several fields that is created from dataset from a linqtosql query. At run-time, the user gets to specify what field he/she wants to display from the list. In other languages, I can dynamically do this like:
valueIwant=mylist(i).[fieldnameImInterestedIn]
Where 'fieldnameImInterstedIn is itself a variable. How do I do this in VB.Net?
non-working actual code follows:
Dim patientdata = (From patientvar In pdfdatacontext.tbPatients Where patientvar.PatientID = patientid)
Dim patientlist = patientdata.ToList()
fieldvalue=patientlist(0).(reportrow.userselectedfieldname)
Is there any way to access your variable names at runtime? Is there any kind of collection you can loop through?
View 2 RepliesI am trying to create new variables inside a class after creating its object at runtime. The problem is that I don't know the variable names or the value beforehand so I have to create the new variables at runtime.
[Code]...
This is a more elaborate explanation of my code. If you observe that in the Eval function I have tried to evaluate Fval(abc). Now the object array abc is not declared in the Test class because it existence is not known beforehand. What I want to do is create an object array abc of length 2 and populate it with some values and when Fval(abc) is called then then the value of index 1 should be the return value of Eval fucntion.
I've got some code that looks like this:
If ediFileGroupAbbr = "NIPDSINV" OrElse ediFileGroupAbbr = "WWPDSINV" Then
Dim p As New PrivateBillingAdapter_ForN(ediFileGroupAbbr, businessLocationID, mode, EDIJobItemLogID, BusinessUnitID)
Return p.ProcessEDI(True, False)
ElseIf ediFileGroupAbbr = "FOPDSINV" Then
[code]...
to which I'm passing in a value of ediFileGroupAbbr = "FOPDSINV". But the code is executing as if it's dropping into the third condition (p is a PrivateBillingAdapter). So I've stepped into the code and, sure enough, it drops into the second condition. BUT, if I step into the execution of the constructor, the debugger jumps to an odd place in the code - sort of the middle of a method and not on any actual line of code.A couple clicks and it hops back out of the constructor, still in the second block of code. But if I mouse over the variable p to see it's type, boom, its a PrivateBillingAdapter (from the third block).Like I said, something is clearly wrong but I don't know what. I've tried rebuilding several times but with no new results.This is VS2003, framework 1.1 with VB.NET.
What i am tring to do is execute certain code based on a variable held in a module someting like compiler directives, here's an example for lack of an explanation.[code]...
View 2 Replies