When I attempt to run a program I just finished coding I get the following message: "Error 1 Handles clause requires a WithEvents variable defined in the containing type or one of its base types." Looked it up online and still does not make sense to me. If I need to paste code or anything else let me know and I will do so ASAP.
View 8 RepliesI am in the processing of moving an app from VB to C# but some of the classes I will just be moving to VB dlls to access from the main C# app. In doing this I am trying to get the VB dlls to utilize the main C# class lib. In this C# lib I have an abstract clase called base process, it sets up a background worker and handles all the progress tracking, errors, and even reports an ETA. To use this in a derived class in C# you would just do this...
public class SomeLongProcess : Common.Multithreading.BaseProcess
{
public void start()
[code]....
The problem is that if I do the equivelant in VB I get an error "Handles clause requires a WithEvents variable defined in the containing type of one of its base types". Well I can't do a WithEvents in the base class because it is C# so..
i am getting errors on last two event handlers. what did i do wrong?
Error - Handles clause requires a WithEvents variable defined in the containing type or one of its base types.D:Shipping ApplicationShipping ApplicationForm1.vb75136Shipping Application
Error - 'PrintDocument1' is not declared. It may be inaccessible due to its protection level.D:Shipping ApplicationShipping ApplicationForm1.vb1119Shipping Application
[code]....
My coding, I got error: Error Handles clause requires a WithEvents variable defined in the containing type or one of its base types.
For information i am using visual studio 2005. Here i highlight my probleam with in my coding
Public Class Admin
Private Sub TextBox6_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs)
End Sub
[CODE]...
Just upgraded a VS 2005 ASP.NET 2.0 website to VS 2008 ASP.NET 3.5. There was an error on the Sub Button_Click. It seemed to be a minor error, the website and the button worked just fine, as usual. What does the error mean?
Protected Sub btnDEreports_Click(ByVal
sender As
[code]...
Error 20 Handles clause requires a WithEvents variable defined in the containing type or one of its base types.
I've just opened a project I was working on yesterday perfectly well only to find it's gone nuts. I'm getting this error ..."Handles clause requires a WithEvents variable defined in the containing type or one of its base types."... on each one of my Sub declarations!
View 2 RepliesI get the error
Handles clause requires a WithEvents variable defined in the containing type or one of its base types.
in the following code..
Public Sub selCurrentManuf_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) _
Handles selCurrentManuf.SelectedIndexChanged
End Sub
The drop list to go with it is the following...
<asp:DropDownList
OnSelectedIndexChanged="selCurrentManuf_SelectedIndexChanged"
selectedvalue='<%#Container.DataItem("c1_manufidcurrent")%>'
[code]....
I created a lable to handle DateTime = Now, It works fine. but when I moved it inside a FormView I Get the following Message. Handles clause requires a WithEvents variable defined in the containing type or one of its base types?
View 5 RepliesI am trying to follow this thread
[URL]
and I have it pretty close but have one error.
Quote:Handles clause requires a WithEvents variable defined in the containing type or one of its base types.
That error is on both of these, in blue
Private Sub SpellChecker1_DeletedWord(ByVal sender As Object, ByVal e As NetSpell.SpellChecker.SpellingEventArgs) Handles SpellChecker1.DeletedWord
'save existing selecting
[code]....
I have added the reference, I have also added them to the toolbox. My dictionary is all set. What did I miss?
when i am selecting form the xaml file a button and then tap event from the right (in order to set the tap event) it auto generates this sub :
[Code]....
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Click, Open.Click,Name.Click
SelectVid.ShowDialog()
End Sub
[code]....
I keep getting this error:
Error1'.' expected.
Error2Handles clause requires a WithEvents variable defined in the containing type or one of its base types.
Error 2 is also error 3
i'm a .net programmer, using .net framework 4, and i have a question about WithEvents clause. [code] Private Sub mylist_AddingNew(ByVal sender As Object, ByVal e As AddingNewEventArgs) Handles mylist.AddingNew..i get this error: Handles clause requires a WithEvents variable defined in the containing type or one of its base types.I think the problem is my custom bindinglist class....but how can i solve this?
View 8 RepliesI get the error on this line on [ListBox1]
[code] Private Sub ListBox1_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles ListBox1.SelectedIndexChanged
error
Quote:
Handles clause requires a WithEvents variable defined in the containing type or one of its base types.
I am auto generating data grid and I am using check box in Data grid View,Now i am invoking check box state changed event but it produces the following error Handles clause requires a With Events variable defined in the containing type or one of its base types.
Here the code
Private Sub PRNT_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles PRNT.CheckedChanged
Some Stuff.
End Sub
Is WithEvents & Handles usage preferable to RemoveHandler & AddHandler?
From Memory point of view (remove an added handler after utilization, etc.)
I've got a TEXTBOX called CompanyName. And I've got a warning in the error tab that says:
WithEvents variable 'CompanyName' conflicts with property 'CompanyName' in the base class 'Control' and should be declared 'Shadows'.
Is CompanyName some kind of reserved keyword? I'm getting the same error for a textbox called Location. Can I ignore these warnings or must I rename my textboxes. My problem is the textboxes are named to match columns in a DB TABLE to allow me to do some auto-binding logic.
listbox control (lst_tpAccount_AvailableAccounts) has an event handler:
Private Sub lst_tpAccount_AvailableAccounts_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles lst_tpAccount_AvailableAccounts.SelectedIndexChanged
[code].....
I am getting the error:"Range variable 'sender' hides a variable in an enclosing block or a range variable previously defined in the query expression."for this
Imports System.Data.SqlClient
Imports System.Linq
Public Class Form1
[code]....
I can select any other item from the table without the error. "sender" has the same properties as "receiver" in the SQL table.
Is there a way to simply the Handles statement? What if i want this sub to handle 20 textboxes do I have to list each textbox there? I already have a loop in my script so i can cycle through my textboxes ("TextBox" & i.text). is there anyway to use a variable or a function after handles to get all the names of the text boxes?
Private Sub textChange(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox1.KeyPress,TextBox2.KeyPress, TextBox3.KeyPress, TextBox4.KeyPress, TextBox5.KeyPress
I have an error that is during the query to a database ExecuteReader 'phase' of my program, i am assigning an .OleDbDataReader to a variable RetVal and then, i am giving this RetVal = Query.ExecuteReader, and then in the while the query is being read loop(While RetVal.Read) i am getting an error in runtime that is "Invalid attempt to call Read when reader is closed." I know this means i have to open the reader, but i don't know how to do this, as i have been using this process for a few weeks and haven't had this error pop up. (and i have managed to use the while loop)If you're not living on the edge, you're taking up too much room
View 7 RepliesI have set my datasource on my datagridview to be a subset of rows as follows:
dg.DataSource = myDataSet.testTable.Select("id=" & id)
But I get a runtime error that Operator '=' is not defined for types 'Object' and '1-dimensional array of DataRow' There should be an easy way to do this that doesn't involve creating new tables, etc.
Solution at the bottom. I receive the following error when trying to update records: Must declare Scalar Variable @PaymentTermID Problem is, @PaymentTermID should be defined already in the Update parameters. The 2 functions for onrowdatabound and onrowupdate are tweaked versions of the ones found here for the DropDownList: GridViewRow.DataItem Property. Delete works fine. No new lines are added, just names changed around. I am not exactly used to working with asp objects.
[Code]...
I have a batch file. It includes two lines, as follows: pkgmgr /n:unattend.xml pause I have run this batch file manually and it works (installs IIS on the local machine). But when I try to run it in code I get an error: "An attempt was made to load a program with an incorrect format". Here is my code to run the batch file:
[Code]...
What does this error mean? I havent modified anything in the designer code, but its giving me an error? WithEvents variable 'Move' conflicts with event 'Move' in the base class 'Control' and should be declared 'Shadows'. The error relates to Friend WithEvents Move As System.Windows.Forms.DataGridViewCheckBoxColumn
View 1 RepliesI have o problem on my codes sqldr = sqlcmd.ExecuteReader when i debug the program error says ExecuteReader requires an open and available Connection. The connection's current state is closed. i dont know what its means that error..
View 1 Repliesi have the folowing co
For x = 0 To 7 Step 1
For i = 0 To 7 Step 1
Dim rectangleShape1 As New Microsoft.VisualBasic.PowerPacks.RectangleShape() 'create a new object to assign to the array location
board(x, i) = New Microsoft.VisualBasic.PowerPacks.RectangleShape() 'create the new object in the array
[code].....
Does anyone know why a local variable cannot be declared WithEvents?T
View 3 RepliesWhen I scroll down to the function shown below, and right click Analogues - go to definition it takes me to the top of the file, and lands on top of the
[Code]...
I'm writing a simple program to "change" a login. I need to know how to create a variable that lasts past when the program is closed (so the changed login stays and is not reset). Here is my code:
[Code]...
In a Visual Basic .NET application, is there a way to use Handles on an object referenced in a DLL written in C#? Compiling the code gives me the error: 'Handles' in modules must specify a 'WithEvents' variable qualified with a single identifier.
I'm writing the Visual Basic .NET application, but I do have the source code of the C# library available.
My current code looks something like this:
WithEvents Friend Module As ModuleNamespace.Module
Sub EventHandler() Handles Module.Events.Event1
Console.WriteLine("Event1 fired.")
End Sub
Replacing Module, ModuleNamespace, and Event1 with the actual names.