I'm gathering strings from a large text document using vb.net (2010 express) and storing them in array variables. The problem that I am seeing is that each variable that is gathered is appearing as text in the title Bar of the form. Is there a way that I can prevent this from occurring?
View 3 RepliesI am trying to add 2 variables and the result to appear in a label.The case is that there is a platinum version of an album which costs more. The extra cost depends on the album so it varies.If the user wants to purchase an ordinary and a platinum album then I must add the two variables and the combined price to appear in a label. The normal and platinum prices appear fine when the other is zero but when I increase the quantity on both the label remains blank.I have an if statement like this:
If PriceNormal >0 and PricePlatinum = 0 Then
lblPrice.text = PriceNormal.ToString("C")
End If[code]......
I have a class that contains one function: "ShowDialog()" It creates a new openfiledialog and sets its title, but when it is run, the title of the openfiledialog is set to the current directory that is shown in the dialog. I would not like this behavior. Here is the code:
Public Class LoadSet
Public Shared Function ShowDialog() As System.Windows.Forms.DialogResult
Dim Dialog As New System.Windows.Forms.OpenFileDialog
Dialog.DefaultExt = ".bsfci"
[code]....
When I initialize a new form to open, the subroutine in the new form starts before the new form is shown on the screen and so when the subroutine finishes and the MsgBox comes up, the form isn't showing.
Is there a way to make the form pop up first before the subroutine starts?
VBExpress 2010 .Net 4.0 I'm trying to have a form that you click on a button and it goes to a new page of the same size in the same location. An example of this type of thing would be the different pages of an install wizard. In this particular project, I have an "instructions" page that you click on that takes you to a new form. On this page is a "back" button that takes you back to the main screen. I'm just not sure how this type of thing is normally done. What I have done works, but you can see the page 'flip' a little, and the form button on the taskbar disappears and reappears as the new one loads.
[Code]...
and I have an equivalent subroutine on the other form to get back. At first I had the Three middle line of code interchanged, which looked much smoother, but for some reason it didn't work on the first click, upon which the form would suddenly move to the wrong location, after which it would work fine, no matter where I moved the form.
I have a feeling that this is probably done in a completely different way, but can't think of a better way of doing it. One way would be to just use one form and change the controls instead, but it would get quite cluttered.
I need to get some text that I generate to appear on a label on another form. I can get it to appear on the same form, but can't figure out how to transfer forms.
View 8 RepliesWhen I initialize a new form to open, the subroutine in the new form starts before the new form is shown on the screen and so when the subroutine finishes and the MsgBox comes up, the form isn't showing. Is there a way to make the form pop up first before the subroutine starts?
View 2 RepliesUsing VB.Net (Windows Application) I have one main form(Data entry form), i creating many form at run time.
Code for creating a multiple form at run time.
Button1 click
If IsNothing(frm) OrElse frm.IsDisposed Then
newfrm = New frmEntry
End If
newfrm.Show()
I have popup windows for selcting the value in the Data entry form.Code for selcting the value from popup windows Popup Window code
If e.KeyCode = Keys.Enter Then
frmEntry.txtbox1.Text = gridview1.Rows(crRow).Cells("code").Value.ToString().Trim()
End If
The above popup window code is working for Data Entry Form, but it is not working for new forms (at run time)When i select the value from popup windows means, it is appearing in frmentry textbox, not in newfrm textbox.Popup windows selected value should appear in current active form.
My application having one mdiform in that form six child forms are there.Switching of one form into anather form blue bar is appearing form at the title of every opened child form.These six child forms are opens in mdiform.how to remove the blue bars are appearing from every opened child form in mdiform.how to remove these blue bar. I have tested this "NewMDIChild.Location = New Point(x,y)".but blue bars are not remove in the opening of mdichild form into mdiform. This bars are appearing in the opening condition of mdichild form after clicking any button in the mdiform.
View 1 RepliesI am desinging a form with mutiple controls on a tab page control and was moving controls between tab pages by cutting and pasting them. The forms designer obviously got confused at some stage and I now have controls that are declared in the designer.vb but do not appear anywhere on the form.
I can't even rename the controls that are there which have been given generic names to the names I want because they apparently already exist. I realise I could edit the designer.vb and remove the references to these controls but that seems fraught with danger?
My application having one mdiform in that form six child forms are there.Switching of one form into anather form blue bar is appearing form at the title of every opened child form.These six child forms are opens in mdiform.how to remove the blue bars are appearing from every opened child form in mdiform.how to remove these blue bar.I have tested this "NewMDIChild.Location = New Point(x,y)".but blue bars are not remove in the opening of mdichild form into mdiform.This bars are appearing in the opening condition of mdichild form after clicking any button in the mdiform.
View 1 RepliesI am trying to display a child form in a Mdi Form without the child Form's title bar showing. The title bar is showing with the default Icon, not even the icon of the child form. When the icon on this second title bar is clicked the popup menu (Restore/Move/etc.) shows.
[Code]...
I update a Form's Title from within the form, but it doesn't update. Any idea how to "Refresh" it so that the update displays?
View 5 RepliesIm am trying to get whats inside the <title>My Data</title> tags, however the results i pull back are not whats in the title tags..
Dim myMatch As Match = System.Text.RegularExpressions.Regex.Match(My_Text, "<(?<title>w*)>(?<text>.*)</k<title>>")
If myMatch.Success Then
[Code]....
What I can't figure out is how to change the title of a form. Meaning when it opens, at the top (title bar) it will say Form1 for example, how can that be changed?
View 2 RepliesI found this link. [URL]. I copied the code to my app and tried it. It didn't work for me. I think in may not have worked because I have a panel control with the dock property set to fill and Label inside the Panel with the Labels Dock property set to Fill. So I changed the mouse event names from Form to Label1, that didn't work for me either. One other thing you should probably know is that I have a timer control running as well (don't know if that makes a difference).
View 16 Replieshow i can put a control (like a checkbox) or a simple button in a form's title bar using VB 2010 and Windows 7? i already studied
[URL] but code samples here just work with WinXP (samples designed in VS2003 & VS2005), no vista nor Win7.
I update a Form's Title from within the form, but it doesn't update. Any idea how to "Refresh" it so that the update displays?
View 2 RepliesI am trying to change appearance but I am not getting any option for it
View 1 RepliesA question in the textbook asks me to use a check box to hide the form title. This is not a homework or test question. I'm doing the book's programming exercises in order to further my knowledge of Visual Basic.
I have completed the entire project, but this alone stumps me. I can't use IF statements or anything beyond what I have learned up to Chapter 2 of this book. The book is Programming in Visual Basic 2010 by Bradley and Millspaugh.
If anyone has this book, can you assist me in learning how to hide the form title by using a check box?
1.How to insert the Title Form and put on the Middle.
2.How to replace the logo Form with JPEG
i would like to be able to make my form title to be something like (document title) - (name of program). The document title is the title of rtb document. how would i do this? i sorta have start.
Me.Text = String.Format("iPad - {0}", rtbeditor.Name.ToString)
I have a form with propterty of FormBorderStyle=None how I can make it movable using VB 2008?
View 3 RepliesThe application (Visual Basic) im currently working is a text document editor (ex. Notepad)And I want the form's title to show the file name thats loaded followed by the application name like this.
View 4 RepliesI update a Form's Title from within the form, but it doesn't update. Any idea how to "Refresh" it so that the update displays?
View 2 Repliesi have this program that allows multipal versions of one form when the program recives a command testform|this is a test|Admin testform is the form name this is a test is the message Admin is the user who sent tit what i want to do is use the name to find the form >>>> add the message to a text box on that form >>> tell them who sent the message in it as well but i dont know how to find the form or add to the box on it?
View 4 Repliesi have been working on an app, that remains just my preset sizes. recently, i have discovered that by double clicking the form title bar, even w/the formborderstyle being set to fixedtoolwindow, the form still maximizes and all of my controls remain in the top/left corner.. not a good view.. so, i set the maximum size of the form, and now when double clicking it, moves it to the top/left of my desktop.. not a good result. here is a quick sample to start w/.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
how do i permanently block the double click on the title bar, to have no effect on the form? i do not want to end up w/having to create a borderless form just to avoid this..
I'm making a windows forms application, and I would like to know how to get a control to be on top of the titlebar/control box where the window title is displayed similar to the save icon on the Win7 Paint program or the tabs for Google Chrome.
View 1 RepliesHow can I create a form with no title bar, but still have a glass border just like the Volume, Power Options, or Network windows have when you click on their icons in the system tray.[code]...
View 7 Replies1. How do I force the Form to change its title through code? I tried: Me.Name = "New Title" during a button press, but that didn't work.
2. How do I make it so a form cannot be resized by the user at all? ie. they can't drag the sides.
3. I have made it to when I save in my application the status bar displays "Save Successful". How would I make it stay with that text a few seconds before displaying "Running..." instead?