I need to know how can I use app path? I have a added Shockwave Flash Object control there in my program. However I have added AxShockwaveFlash1(swfla1) there in my form. I have written code there in Form_Load event so that swfla1 will get flash file(.swf) to play.
[code]...
I have a Access program and I'm using VBA code in the background to run Winunzip using shell command. Well, the path of the .zip file has spaces in it and it's not recongizing the path as a valid path. Is there a another way to tackle this problem besides the shell?I can't us pkzip either. Has you can see I had to use progra~1 instead of Program Files.[code]
View 2 RepliesProblem drawing dotted path lines, with even dots along the path line.I want to draw a path line that can be any shape (square, round, outline etc), and along this path line I want even dots to appear.
I also want to be able to resize the shape (as in the example attached)This is very easy to do using "DrawPath" and defining points for the path and using a pen defined as dots.The problem I have is I want the dots to be evenly placed along the path, on any shape or size I draw.In the example I have created, I create a square with 4 points and draw a dotted path.There are 2 buttons that allows me to resize the square (larger or smaller) this helps show the problem more clearly.
The path starts at the top left corner and finishes back at the top left corner, the dots are evenly placed along the path, except the final dots at the end of the path. (Sometimes the dots are even and other times they are not even).The shapes I want to draw can be any size and any shape, but I have used a square in this example to show the problem I have. point me in the direction I need to go that allows me to draw the dots and give the impression that they are even all along the path, for all shapes and sizes.
In the pictures below if you change the size of the shape, one will have even looking dots, the other will not.
[Code]...
i used the following codes:
private mediapath as string = "C:movie.avi"
private form1_loads blah blah blah
[code].....
I am trying to create a function to convert a mapped drive path to a UNC path. I did some googling and found several different pages on the matter. I am most interested in the first one, but I cannot seem to get the code to cooperate. Since the original post was in C#, here is my VB.NET conversion:
[Code]...
I am trying to read and display a file using MapPath as follows :
Response.ContentType = "Application/pdf"
Dim FilePath As String = MapPath("../Document/123.pdf")
Response.WriteFile(FilePath)
Response.End()
This procedure will work fine and display in the browser. However, if I save the file to C:Document123.pdf, how can I access this file using relative path in MapPath function. Is there an option to access the file which is saved out of IIS server? I am using vb.net 2003.
I'm using acrobat that returns unix paths instead of windows path's. So im wondering if there is a way in vb.net to convert the path to windows path.
i tried using:
docs(i) = javaScriptObj.path().ToString.Replace("/", "").Substring(1)
position = docs(i).IndexOf("")
docs(i) = docs(i).Substring(0, position) + ":" + docs(i).Substring(position + 1)
this only works on local files, but fails when im starting to use network drives.
I want to draw a path line that can be any shape (square, round, outline etc), and along this path line I want even dots to appear. I also want to be able to resize the shape (as in the example attached) This is very easy to do using "DrawPath" and defining points for the path and using a pen defined as dots. The problem I have is I want the dots to be evenly placed along the path, on any shape or size I draw.
In the example I have created, I create a square with 4 points and draw a dotted path. There are 2 buttons that allows me to resize the square (larger or smaller) this helps show the problem more clearly. The path starts at the top left corner and finishes back at the top left corner, the dots are evenly placed along the path, except the final dots at the end of the path. (Sometimes the dots are even and other times they are not even).
The shapes I want to draw can be any size and any shape, but I have used a square in this example to show the problem I have. I need to to draw the dots and give the impression that they are even all along the path, for all shapes and sizes. [Code]
i get this error "Illegal character in path" when checking for a folder to see if it exists.
the folder is D:PlanificatorPlanificatorPlanificatorServerinDebugData1 and it exists.
Function IDExists(ByVal User As String)
User = User.Trim
Scrie("Se verifica existenta ID-ului " & User)
[code]....
Well now i have an issue which is pointing in the use of "path's" physical and network.I have a SQL server on a Server machine and i have a desktop machine used as client.I'm runing from my client machine a stored procedure in order to add a streaming data base.But also before i run this procedure i run another one which prepare the desired "path", this procedure takes:
myPath="\ServerSharedFolderSQL
in order to run the first procedure i have to turn myPath in each physical name:
myPath="DriveLetter:PublicWorkFilesSQL"
Now my Issue is how i will have the physical path, which is build it on the server and which it's from very difficult (to imposible) to know it? Basically i need a function which will return me the physical path, which the implementation it's not knowing to me. My developing environment is vb.net 2010?
I am using this code below:
[Code]...
I thought the %AppData% should find the relative path. When I go 'Start|Run|%AppData% windows explorer takes me to that directory. I can not put the full path in, as the user is different on each client machine.
Private Function UploadPic() As String
Const bmpw As Integer = 300
Const bmph As Integer = 300
[code].....
I have an .exe application written in vb.net. When I make shortcuts to the application, say on desktop (or anywhere else) and then click on them I want to programatically get the path to that shortcut, ie. C:/Users/xxx/Desktop/shortcut.lnk.
I want this so I can store the pairs shortcuts : (program + different cmd args).
I'm just trying to move my folder from one path to another path.The coding seems like it has moved it but the folder is not appearing in my destination path?
View 7 RepliesSay URL1: http:[url].....
RelativePath: ../../hello.htm
Hence absolute path is http:[url].....
Is there a function that do that?
can i know what code that enable me to list all currently running process and get their path and list all the path in listbox1.
View 2 Replieswhen i try to write to a file I get the error:
Quote:
Access to the path "PATH HERE" is denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.UnauthorizedAccessException: Access to the path "PATH HERE" is denied.
ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. To grant ASP.NET write access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.But when I add: <identity impersonate="true"/ to web.config I get the following error when my application trys to open a DB to read it:
Quote:
Unspecified error
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Unspecified errorLine 55: objConnection.Open()
i want save image in directory path and also save path in database...sqlserver 2005 and retrieve in in same folder and path?
View 1 RepliesI have one project and in this project I want to save picture to application path and save the path to database as string and retrieve the image from the application path.Can u give me some idea about it..i am using vb.net as frontend and ms access database
View 1 RepliesThe code below reads an Icon from an .ico file, converts the Icon read to a Bitmap and saves the bitmap using:
Bitmap.Save(PathA)
Then does:
PanelShowWrittenIconA.BackgroundImage = New Bitmap(PathA)
[code].....
I am having a big problem with deleteing a file form the server. I have the filename for a image stored in my SQL database. the problem is i am getting an error of "Illegal characters in path. " Here is the code below:Everything is working fine until the delete command.
Protected Sub DeleteButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim tmpEquipID As String = Request("EquipID")
Dim tmpImageID As String = (CType(FormView1.FindControl("ImageIDLabel"), Label).Text)
Dim d As New equippicsDataContext
[code]....
I am having trouble getting the path of my application's executable file at runtime. This application is being started by another executable and whenever I try to use Application.ExecutablePath I get the path to that application instead of mine.
[code]...
Neither of these give me the path of the program in which those two lines are exectured, they only tell what program started this program.
Say I have a project that I am deploying at
[Code]....
What would be the most reliable way to know if I was in the folder "path1", or "path2"? Can I grab that directly, or do I need to split() somehow on the Request.Url.AbsolutePath, or... ? I just want to change colors, etc. based on which fol der the user is in.
I need to have a code that will get me the currentdirectory + the current filename of the compiled exe.
System.IO.Directory.GetCurrentDirectory()
helped to get to the directory but I'd like also to have the filename included example... C:folderfolder2file.exe
I went through a tutorial on how to add a web cam into your programs and it was pretty simple. It had me make a form then copy and paste the code. However i still don't know how to add video to a program. So i read the code and i understood about 20% or less of itWhere should i start to gain an understanding and be on my way to become a guru?
View 1 RepliesRecently i been writing some application in which it will compares 2 list view data and populate the difference data in a third list view .I have manage to get the logic working fine and also showing the different files name in the third list box , when i compare two listview data .
My logic goes like this :I hard code the files i need to have in a notepad , than i populate the data in listview2 upon form load and i create a button to get some folder on my computer manually . On click of the button it will allow me to choose the path to the folder and display the files name into the first listview .THAN it will compare the first and second listview data and populate the files missing in listview one into a third listview box .THE PROBLEM I FACE IS : I can only manage to get the files name display? is there any way to get the path of the file too ?
Imports System.IO
Imports System.Windows.Forms
Public Class File_Compare
[code]....
What is UNC Path (Just Defination) & If i want to install my (Published Application) In " Program Files " What the UNC path I Give...
View 10 RepliesIf I have a file path like "C:My DocumentsImagesImage1.png", how can I get the parent folder name of the "Image1.png" file? In this case, "Images", but that's just a sample. I've looked through System.IO.Path and there doesn't seem to be anything there.
View 6 Repliesi'm using opendialog control to select the database file. this works for me.
Private Sub btnbrowse_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnbrowse.Click
opendatabase.ShowDialog()
txtfilename.Text = opendatabase.FileName
End Sub
Then i need to connect with the actual code.i'm able to connect my database only by giving the direct path in the code.
dbProvider = "PROVIDER=Microsoft.Jet.OLEDB.4.0;"
dbSource = "Data Source = G:module1module1student.mdb"
but i need some other way to access database path from the textbox( i.e., in my code it is txtfilename.text).
dbProvider = "PROVIDER=Microsoft.Jet.OLEDB.4.0;"
dbSource = "Data Source = txtfilename.text"
Environment.GetFolderPath(Environment.SpecialFolder.Desktop)The main reason is we area talking about an Environment that has XP, Win Server 2003 (TS), Win Server 2008 and Win 7. Obviously different path depending on the OS. I need to copy a file to a users desktop and would like to do so without having to hardcode the path as it could change depending on where they are working from.
View 5 Replies
