Why is this not working 75% of the time? It never gives anything but 50% and 100%
vb
Dim percentComplete As Double = ((completedVariables * 1.0 / (listOfButtonsToPress.Count - 1.0)) * 100)lblPercentComplete.Text = "Percent complete: " & percentComplete & "%"If completedVariables < listOfButtonsToPress.Count - 1 Then completedVariables += 1End If
I have a form in which there is a datagrid and one Save button pnly.I want to save data also by pressing "Ctrl + S".I am using below code. but, its not working all the time means if there is focus on form,.....How can i achieve this. Tell me some modification like on which event i should do this.....
If e.Modifiers = Keys.Control And e.KeyCode = Keys.S Then
MsgBox("Ctrl + S is Pressed.", MsgBoxStyle.Information, MsgBoxStyle.OkOnly)
'--- Condition Here.
End If
I need help in saving datetime to sql database.
[Code]...
I have values which is the hours worked on a project for each day of the week.I would like to add all the values and get the consolidated amount of hours worked each week.If i have two values of the format hh:mm:ss like 03:15:00 and 02:20:00.The total should be 05:35:00.Is there any function to add time format as produced above.
View 3 RepliesCancel Button Some time not working
View 3 RepliesIm having a problem on conditioning, i cannot put 2 condition at a time, only 1 is working , i need to put the condition where if the user inputs blank number there will be a msgbox and a condition when a user inputs a number lower than 45 there will also be a messagebox.
CODE:
I've got my program to run a set of code based between certain variables. The variables are:
RBM (Radiobutton for male gender)
RBF (Radiobutton for female gender)
Based on that, it runs a new sub which then does a select case based on ClassBox (Listbox) index.
Now here is what I don't get. When I run the code, it works flawlessly except on ONE of the case selects.
Here is what I've got for the codes:
[Code]...
If I select anything, it loads the correct directory. The error isn't the case selects, I put them in there in case I missed something. I ran debugger with breakpoints so I could see if the data was getting crossed wrong. When I select index 4 on the female sub it loads the correct directory and I set a breakpoint for "OFD1.InitialDirectory = Race" which Race showed the correct directory, but when the OFD1 came up, it's not the folder 91 (Index 4 in female), it goes to 80 (Index 7 in male) which isn't even a female option and it's not the same index in the male section either.
I found very wiered behaviour for DateDiff. or any other kind to date difference methods avalibale when Date has AM/PM specified in it.
Cl.LunchStartTime =
"2009/7/13 12:10:00 AM"
Cl.LunchEndTime =
[code].....
In this example I want the loop button works in all mdi child forms at the same time; now in the first mdi child form it will work, but when getting a new mdi child form with that, it will stop in the first one!
View 3 RepliesI have a form from which I am visually representing data (from access database). I have set up a user log on a separate form (allows user to make comments as they scroll through the data and see any points of interest etc). The second form is linked via a textbox in terms of a common field in this case the field name is "Datetime".
What I want to do is be able to scroll through the data and make notes on the second form and add them to another table in the database. I have managed to do all the above but obviously loose focus of the second form when i scroll through the data on the first. Is there any way of being able to interact with both forms at the same time?
I'm importing data from an excel file. They have a date column like 06/07/2011 and a time1in column with a value like 13:00:00. Now I convert the datestring to a date like this:
[Code]....
I've been trying to make up a Ghost Text Box, so that it shows some 'ghost' text when its contains nothing.
What i did was inherit from the normal textbox, and use OnPaint to show the ghost text, the User paint is switch on/off depending on if there is any text in the textbox.If i start (in the design) and add some text it all works as i expect at runtime, but the text does not get shown at design time (for some reason)
If i clear the text at design time, then it shows the ghosted text at design tim. At runtime the ghosted text is shown, but when you click in the box and hit a key, the key is shown in bold, which is odd as the font is not in bold.
[Code]...
I have an ASP.NET application with a SQL Server back end. I am storing all my dates in UTC format and doing the appropriate conversions to the local time zone of the browser viewing it. One of the pages asks for a start date and end date (no times).
I am taking the start date and setting the time to 00:00:00 hours (midnight) and I'm taking the End time and adding a time of 23:59:59, so that the date range covers the whole day. Now what I'm trying to do is do a SQL query to do a search for records in this date range. The problem is, the data in SQL is in UTC time and the user is typing their dates and times in their local date and times. My quickest solution was to convert the date and time to UTC, then search the records. However, by doing this, I am to believe ASP.NET converts the given time and date to UTC based on the server time zone. How can I convert a date and time to UTC time based on the time zone of the user?
I found on msdn samples and modified (add Thread.GetDomaind.UnhandledException)
<SecurityPermission(SecurityAction.Demand, Flags:=SecurityPermissionFlag.ControlAppDomain)> _
Public Sub Main()
' Add the event handler for handling UI thread exceptions to the event.[code].....
It appears that my favorite thing in the world is tackling projects that are beyond my current knowledge and abilities. I have a little project that I am working on which is a simple image viewer stocked with (upon completion) your standard Load..., Next/Previous, Zoom In/Out, Actual Size, and Full Screen capabilities. However, I am running into a few snags:
(1) I've been able to get my "Load..." button to display a file dialog box, but I cannot seem to get a working filter (with which only image file types are allowed to be selected) in working order.
(2) I have a PictureBox object (entitled PictureBox1) that displays the image selected via the file dialog box, but it loads images in their full size (1:1/100% zoomed) state without scrollbars, etc. to allow me to navigate the loaded image. I would like to have it load the image, initially, to fit within the dimensions of PictureBox1 and from there be able to zoom in/out via my "Zoom In/Out" and "Actual Size" buttons and be able to scroll if the zoom level is beyond the dimensions of PictureBox1.
(3) It dawned on me that I haven't the faintest idea how to get my "Next/Previous" buttons to allow the user (me) to navigate, in succession, the images contained in the folder in which the currently loaded image is stored. [code]
If it is deemed that this thread is inappropriately requesting help, I ask that it be locked/deleted quickly as I recognize that this is a large community with many discussions going without need of unwelcome posts.
The idea with this form is to add the futures which is calculated when the button is pushed but I need the list to update every time and show the values each time to which the previous value is added to the new calculation, e.g. of what it should look like in listbox:
Year 1: $1,290.93
Year 2: $2,724.32
Year 3: $4,350.76
etc....
I have been working on this a while and I am at a standstill, I was given a function to clear the form everytime it calculates but I don't know how to implement it, I am new to VB. Here is what I have so far:
Public Class frmFutureValue
Private Sub btnCalculate_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles btnCalculate.Click
[code]....
Basically i'm trying making a task manager program for myself. I want to know how I can display a message box and or play a sound when system time = time displayed in listview. I have used a dropdown box for the user to select which option they would like to select - sound or message box to popup. The data for the task will be stored in a listview box. I want it so that when the date and the time is = to the date and time set for the reminder the action will follow.Here is my code so far:
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim notext As String = ""
If TextBox1.Text = notext Then[code]....
So I currently have the following:
2 timers
2 labels
1st label is "Clock" this pulls the time from the users current time zone/local time
2nd label is "UTCClock" Which would be UTC time
Now I have this for the first label: clock.Text = Format(TimeOfDay, "hh:mm:ss tt")
Which would give the users current time zone/local time. As for the UTC.. how would I add in for the UTC time from where the user is located at? I did some searches.. but couldnt find what I was looking for.. IM pretty sure its not as easy as getting the users current time zone/local time.. So im assuming that Theres a "bit more" code into getting UTC time..
I'm using
Days = Dat2.Subtract(Dat1).Days
where
Dat2 = today
Dat1 = installed date
to trace the days of a program installed in user's computer.However, the user can changes the system time of his computer to a advancing date. How can I get a SNTP time from internet to solve this problem?
I need a start date, a Total time passed until now, an average time per step, and a estimated time to finished. How can I do that? Also, I can close the application and when start up again I want to get the time counters as the last time, so How can I store that data is normal txt file (I say txt to take advantage of the ini app file which is a txt).
View 1 RepliesI am using this line of code on form load event it is working very fine but i have to problems
1. It replaces the form name and display the date and time but i want to keep both date and time and forms caption separated by some space.
2. When form loads it load the current date and time but the time does not change it should run.
What should i do please please help me code is as follows
Me.Text = Date.Now.ToLongDateString & " - " & TimeOfDay
I used .NET Framework 1.1 in C/S project before. Now I have updated the project to use .NET Framework 3.5 without modifying source code, but I have found that : the Remoted DateTime values can not be converted to the equivalent local time of a remote computer that is in a different time zone. In .NET Framework 1.1, the DateTime values can be converted automatically.
[Code]...
There is a varchar column in the database table in this format of military time 1230 or 1750 or 1320 and that field get populated into a gridview in asp. I need to convert that string to standard time. I have tried the DateFormatString and nothing seems to work.
the asp is
<asp:BoundColumn DataField="ScanTime" SortExpression="ScanTime" ReadOnly="True"
HeaderText="Scan Time" DataFormatString="{0:hh}:{0:mm} {tt}">
<ItemStyle Width="80px"></ItemStyle>
</asp:BoundColumn>
that DateFormatString causes Input string was not in a correct format. error.
I have tried combinations of hh:mm and things like that but since its a varchar I think its failing
How to get the current date and time in textbox in IST ( Indian Standard Time) in vb.net ?
View 1 Repliesat the time of recoredset movenext out of memory error occured in run time data have 3800000 lakh recored
View 2 RepliesIs there a way of converting a unix time stamp to normal format time and date in .NET?
View 3 Repliesusing VS2008, targetting framework 3.5I have a rather complex UserConrol which does some of its own rendering.I display this UserControl on a form.Opening that form in the Designer creates an instance of the UserControl in the Designer, which tells me a NullReferenceException is occurring in one of my rendering methods.I have attempted to correct this by making alterations to the UserControl's default constructor, but have not found success.
View 1 RepliesJust getting started in VB.NET. I would like to add X-number of text boxes at run time. And then be able to address them by their index or some sequential numerical value (like an array)
This is what I have so far:
CODE:
When I turn this into a loop to create multiple toolboxes, how do I assign a name to the controls, or will all of them be named "MyTextBox" ? I'll increment their position so thats no problem.
When I run my app at first its keeps time accurately for the first minute or so there after it starts loosing seconds, and by the end of the day its minutes behind.I've created a class called ServerTimeTimer that has a timers.timer object that elapses every second and adds a second to a dateTime variable, and a property to retrieve the date time.[code]
View 5 Repliesi'm using a date time picker with format set to time. i want to be able to trigger an event at the time selected in the date time picker
View 19 Replies
