i created a DatagridViewNumericUpDownColumn but i got error message Cannot access a disposed object. Object name: 'NumericUpDown'when i closed and reopen the form. It shown You are not authorized to perform this action.how can i get access to view this thread?
View 4 RepliesI have a large ASP.NET project where I want to do a mass search and replace (about 3500 instances)
I want to change
If strErrorMessage.Length > 0
If strSomeString.Length > 0
If strWhatever.Length > 0
and any other similar call to the Length method from a string to the following
If Len(strErrorMessage) > 0
If Len(strSomeString) > 0
If Len(strWhatever) > 0
Anyway to reliably do this in one shot?
I can do a search and replace for something like If *.Length > 0 --> If Len(*) > 0
This just won't work though as it won't understand how to rearrange it properly. Currently have VS2010 and N++ at my disposal.
I am using replace function to replace a character in the file
sw.WriteLine(Regex.Replace(strLine, "\", Chr(13)))
This code is working fine, but now I want to replace two times and I want to use the replace function twice. Something like this, but it is not working . Can anyone tell me how to use Replace function multiple times?
sw.WriteLine(Regex.Replace(strLine, "\", Chr(13)).Replace(strLine, Chr(13), ""))
I got this problem, is there way to use "replace" function to replace multiple strings of same list?
Like;
Dim rList As List(Of String)
rList.Add("A")
rList.Add("B")
[Code]....
In c programming language,
I can do
printf("%d
", value);
But in c#, how can I do it? For example string is "Good %s everybody"
I want to replace %s with the variable. Are there any solution except str.Replace("%s","good morning");
Their is a alfanumeric value of any lenght (string) and i want to replace its all characters with 'X' except right four characters.[code]I have created a function but got stuck:[code]please tell me a better fuction to perform such a operation
View 4 RepliesI have a text file like this
4.5 28 Red (T1 ) [1 12.86 53.8] 229111 -28275 198452 -1309 | 11.0 28 Red (2 13.10 04.0) [T1 ] 130611 2948 229111 28275
1.5 28 Blue (T2 ) [1 07.06 59.1] 191611 51225 190456 39339 |
[code].....
It works for the First Replace but not for the Earnings Replace, I want to check a label and if its have a First Character E I need to be replace with
[Code]...
I am a long time VB6 programmer and am just starting VB 2008.I am learning VB 2008 by converting an existing VB6 program.I have a section of code: [code]frmInstall has an operator input.When the input is complete, gbolWait4Install is changed to Fales.I don't want the program to move on until the operator input is complete.What is a clean way of doing this in VB 2008?
View 1 RepliesI have a replace function in text files where it replaces all the vbTab with ';' betweens the columns. Sometimes it may be that some fields have more vbTabs and then there is lot of empty fields.How do I via a smart and simple way to replace all vbTab with ';'. That is, the field has more than one vbTab will they just be replaced by a
vb.net
Dim Fs As FileStream = New FileStream(my_filename, FileMode.OpenOrCreate, FileAccess.ReadWrite, FileShare.ReadWrite)
[code].....
I have a VB .NET String. How can I search that string for a character string and replace it with another string?
For example:
Dim rValue As
String = sproc.ExecuteScalar()
' rValue now has the XML string <indracio fire height=23, width - 6>
/* This is the string that I want to search. Replace the words "indracio fire" with the word "lucion time"
How can I search this string for the words "indracio fire" , and replace with the word "lucion time" ?
I'm using a recommended character replace regex I got from this forum, however it is not fully working in deleting unspecified characters
Original String:acAc10[]() _~!#$%^'&*()+-[]`"
Actual Result:acAc10()_#$%'&*()+-"
Desired Result:acAc10() _!'-"
[Code].....
I don't use VB.Net very much, still mostly do VB6, but I am doing this project in .Net. I have a huge string of data, 168 Mb that I stream in from a file to a string variable. Then I have to perform a number of replacements on it before using the data to compile statistics. Because of the nature of the data, I can't break this up into smaller strings.
The problem is that I get a system out of memory error after a few replacements.
I've used both Replace(x,y,z) and X.Replace(y,z). The second one gets a little farther in the code before it crashes, but they both crash.
When I run it in the IDE, the IDE is using about 130 Mb of RAM, the Exe of the app is running about 350 Mb, and one svchost.exe runs about 300 Mb
Other than that there are no major RAM uses going on. The PC has an i7 980x cpu with 12 GB of RAM.
I am creating an text encryption/decryption for my friend and I to use on facebook, because his parents read his messages. I made everything correctly, but when I hit the buttons they don't do anything.
VB
Dim strString As String
Dim strString2 As String
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim strString As String
[code]....
vb.net
'strSearch = textBox.Text, columns 2 to 10 are the optional columns you want to search to. Function WhereQuery(ByVal strSearch As String, ByVal column1 As String, Optional ByVal column2 As String = "", Optional ByVal column3 As String = "", Optional ByVal column4 As String = "", Optional ByVal column5 As String = "", Optional ByVal column6 As String = "", Optional ByVal column7 As String = "",[code]..
sample output:
im also thinking on using stringbuilder to replace my strings.
I am trying to perform calculations on Regex substrings. I would like to do something like (see $2)
lblResult.Text = reg_exp.Replace(txtInput.Text, "$1" & "$2" * 0.039 & "$3" & "$4" & "$5")
I can only do this like:
For Each RxMatch In reg_exp.Matches(Me.txtInput.Text)
Me.lblResult.Text = Me.lblResult.Text & _
RxMatch.Groups.Item(1).ToString & _
Math.Round(CDbl(RxMatch.Groups.Item(2).ToString) * 0.03937, 4) & _
[code]....
I am using a software that grasp information from web-sites. But I want to something on those information. For doing that, it allows me make a VB script. Actually I have never studied any Vb code. But i found a solution for my project. The data from that website is for exmp. "1.02.30" I want to change first dot into semi colon and the second dot into comma, namely "1:20,30". I found replace function and it works if i want to do "1:20:30" that. But I have to change first dot into semi colon and the second dot into comma.
View 3 RepliesIn vb.net how can i use replace function when the replace from part has double quotes in its value ?
View 1 RepliesI am writing a program and I have the Read Function all written out. I need to have the write function. I think is I copied and pasted from the Read function I wrote.
I was able to Mass edit This:
Reader.Position = (&H)
NumericUpDown281.Value = Reader.ReadInt16()
Reader.Position = (&H)
NumericUpDown280.Value = Reader.ReadInt16()
Reader.Position = (&H)
[Code] .....
And there is at least 370 NumericUpDown's. Is there any way to search/find/replace all in one instead of typing:
Find what: NumericUpDown320.Value = writer.WriteInt16()
Replace with: writer.WriteInt16(NumericUpDown320.Value)
Each individually?
The write function will only write properly this way:
writer.Position = (&H)
writer.WriteInt16(NumericUpDown66.Value)
And not this way:
writer.Position = (&H)
NumericUpDown319.Value = writer.WriteInt16()
how can i get the illegal character in a string
for example
dim Strto_check as string = "1+2-2"
dim Listof_Illegalstrings = "~!@#$%^&*()_-+=-?/.,><|" ""
now i want a function to find out which is the invalid character available in the strto_check variable and then replace it with a standard place holder
How to create a function that replace the apostrophe (') into empty string?
View 3 RepliesI found this function that replaces multiple substrings within a string on the internet but it gives an error on one of the parameters.It doesn't like this one:
ByVal ParamArray FindChars()) As String
Can you look at the code and correct the error since I don't yet know about explicitly typed parameters?
Emad
Public Function ReplaceMultiple(ByVal OrigString As String, _
ByVal ReplaceString As String, ByVal ParamArray FindChars()) _[code]......
Here is my code snippet:
Public Function convert(ByVal robert As String)
Try
robert = Replace(robert, "U", "A")
[code].....
I have the following code:
Dim lStatementText As String
Dim lStatementString As New System.Text.StringBuilder
lStatementString.Append(RndRes.Forms.txt_request)
lStatementString.Append(" ")
lStatementString.Append("<b><a>")
[Code]...
Where Request.ID, Request.Description and also RndRes.Forms.txt_* are all strings. I want to display the string I build up here in a Infragistics FormattedLinkLabel. The problem is that if any of the strigs from the Request class contains a HTML character, the label is not displayed properly and the HTML encoding is broken.I need to find a function that masks the HTML codes.
Public Sub MyFunction()
Dim lowstring As String
lowstring = "hi"
Me.RichTextView.Find(lowstring, 0, 2)
End Sub
The above produces the error of Overload resolution failed because no accessible 'Find' can be called without a narrowing conversion:
Public Function Find(characterSet() As Char,
start As Integer, end As Integer) As Integer:
Argument matching parameter 'characterSet' narrows
from 'String' to '1-dimensional array of Char'.
Public Function Find(str As String, start As Integer,
[Code]...
earlier with my program question and found out that """" is how you make " become another variable in the function:Robert = Replace(Robert.ToLower, """", "A")So now I am also trying to work with other keys like the semi-colon. I put it in the function like this:Robert = Replace(Robert.ToLower, "char(59)", "B")I also tried to insert ; in place of char(59) with in front of it as an escape key, none of this worked. It still just gives me a ; when I type
View 2 RepliesI would like to allow my users to decide where they want their data to reside. I have created a data source which is referenced by crystal reports. I would like to replace the |DataDirectory| to point to a path the user selects. or if possible substitute it with vb function.
Below is the line in xml that point to my db. I would like to allow it to call a vb function that will return my db path I am not sure how to replace the connection string by using a vb function in xml.
<Connection ConnectionStringObject="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=|DataDirectory|MY_DB.mdb;Persist Security Info=True;Jet OLEDB:Database Password=pass" IsAppSettingsProperty="false" Modifier="Assembly" Name="MY_DB.mdb" Provider="System.Data.OleDb" />
I would like to replace |DataDirectory| with the result of a function called MyDBPath(), can anyone assist.
I have some existing code that looks something like this:
[tag:cb cbid="12345" cbwidth="200" cbclassname="calloutbox" cbposition="left"] Lorem ipsum dolor sit amet, consectetur adipiscing elit.
[tag:cb cbid="123" cbwidth="200" cbclass="calloutbox2" cbposition="left"] Suspendisse eleifend enim a magna pretium porttitor.
I need to write a VB .Net global function that will match these [tag:cb] and take the optional parameters and rewrite the string with Html tags.
<div id="12345" width="200" class="calloutbox" position="left">content (based on id)</div>
how to remove or replace specific characters from a string. The code sample is provided contains a VBScript function to parse a string, replacing or removing any character found in the array declared at the beginning of the function.VBScript String Clean Function - Remove/Replace Illegal CharatersThe function was originally writted to remove illegal characters found in a string for use as a document file name in SharePoint Document Library.To use the function, simply update the array at the beginnning of the function to include all of the characters which are to be removed or replaced. If replacing specific characters with something else, the you will need to set inside the finction the string which will replace each character if found.The VBScript function then returns a cleaned string.VBScript String Clean Function - Remove/Replace Illegal CharatersBlogs: SharePoint Development | Web Development & Programming | Webmaster resources & free SEO
View 1 Repliesi want to copy all the files in a directory with an extension e.g .exe or maybe all them files *.*I searched on google and found this on MSDN But it doesn't work when i type *. or *.* or *.exe into the textbox and there is files in that folder.[code]
View 7 Replies