I have a webbrowser control, where I show images (bmp files, that the program creates), and I want to add some UserControls to setup the images (as showing layers, or choosing colors to display). Is easy to do appropiate UserControls on VB.NET, and I know almost nothing about HTML, so, I would like to add standard VB.NET UserControls near the images.
View 12 Repliesi want to get the html Source code of website,it something like:wb.Document...
View 13 RepliesI know it is possible to save a page viaWebBrowser1.DocumentTextI want to save the current loaded page in webbrowser controlin the same way i.e. does,creating the mypage.html and the associate dir mypage_filesthis way I also save images
View 2 RepliesHave experimented, but none of them has worked.
View 16 RepliesI have a web browser control, what I use is:
Ret = (MainBrowser.ReadyState <> WebBrowserReadyState.Complete Or MainBrowser.IsBusy)
If ret is true, not loaded, otherwise, loaded. It works fine on winxp, however, on vista, most times, it works, sometimes, not. Do I have to use documentcomplete for this? The page is loaded from another thread, does it matter?
I'm using a webbrowser control in my program and I navigate to a page that uses sessions. I need to delete them somehow and I tried to close IE and enter it again and it worked, the sessions were deleted. But I've done it manually, and I need to do it through my program, so is there a way to imitate the closing and reopening of my webbrowser control?
View 3 RepliesI am navigating to a web page with my webbrowser control
[Code]...
and this works on most pages. Now I'm going to a page that I guess there are errors in the page and I get a box asking me if I want to debut in IE's built in script debugger or something to that effect. Is there any way to have the system ignore this message and continue to load the page as normal
I'm using a webbrowser control in my program and I navigate to a page that uses sessions. I need to delete them somehow and I tried to close IE and enter it again and it worked, the sessions were deleted. But I've done it manually, and I need to do it through my program, so is there a way to imitate the closing and reopening of my webbrowser control?
View 10 RepliesHi,I need to see if a webpage displayed via the web browser control contains certain words .I've tried parasing through the html but that contains too much junk html and css tags which caused problems(I've tried using regex to remove them).That was done by using property webBrowser.document.Body.InnerText.contains .
Are any way to search through the actual text on the webbrowser and not html via the program in ways similar control-f function on most webbrowser but using code to do that ?
I am using web browser control in one of my forms for displaying html files (local files). Before I load the next file I want to clear the webbrowser control of the previous page. I am trying the following method which I found while searching the net.
private Sub ClearWebBrowser(ByVal wb As WebBrowser)
Dim tempDoc As IHTMLDocument2 = CType(wb.Document.DomDocument, IHTMLDocument2)
tempDoc.write("")
tempDoc.close()
End Sub
I have added the reference for mshtml namespace in com tab. When trying to run the program, error is thrown like "Type 'IHTMLDocument2' is not defined. (BC30002)".
I'm using a WebBrowser control in my current program in a bit of a bastardized way: I don't use it visually, I just use it because I'm more familiar with its events.
So, basically, I create a WebBrowser control and navigate to a page to login. Then, when logged in, I create a new WebBrowser control and navigate to a different page.
I've used this program for four months with no difficulty. Starting today, though, the second phase of that has been going really, really slowly. What used to take 3-5 seconds is taking 25-30 seconds. It still works eventually, it just takes a while.
Usually I would assume this was a server problem. However, navigating to the exact same URL in Firefox happens extremely quickly. Weirder still, within the program there is a user WebBrowser control -- I can copy/paste the URL the previous (not visible) WebBrowser was navigating toward into this user WebBrowser, and it goes just fine.
What in the world could be holding up this other "custom" WebBrowser? I don't even know where to begin in diagnosing this.It might be important to note that the site this is working based off recently underwent some changes -- but I can't imagine why that would affect only these "custom" WebBrowsers and not the user one in the same program.
For example how do u delete on row in a table?how do you remove a <img /> entry?
View 4 RepliesFor example how do u delete on row <tr> in a table <table>?how do you remove a <img /> entry?
by remove means not just set the innerText to?
How can I get a list of ALL links on a page after browsing to a page via the webbrowser control?
View 3 RepliesI have been tasked to do a project, and have been given a list of links from the client - what the Project needs to do is:1 - open google with a specific search phrase - no problem2 - look on that page for any links containing any member of the list of links, if found, invalidate the entry in the list, and auto-click the link, then go back3 - repeat for any other "finds" on that page4 - when done, auto-click on "Next" (no problem) and go back to step 2For now, I am not even attempting to auto-click the found link and go back, I am just listing all found links in a TextBox. The problem I am having is waiting for the next pages to load before looking for a match in the list of links. I tried using webBrowser.DocumentCompletedto set a Boolean - I tried testing WebBrowserReadyState in the DocumentCompleted event ar the code below gives the best results but it is inconsistent, meaning it completely misses some pages that I know have links on them that match.
View 6 RepliesI am using a Webbrowser control to access the elements in an HTML page which contains a JavaScript link which when clicked, adds extra content to the page. This works fine in IE 7 and Firefox.I then want to access this extra content in my program. Having found the HTML element containing the link, I tried element.InvokeMember("click"). I have used this successfully with a submit-type link to login to the web site, but cannot get it to work with the JavaScript link. I also tried setting the focus to the link element and using SendKeys to send the ENTER key, but all to no avail. Nothing seems to happen. I don't see the extra content produced by the JavaScript, nor do I get an error.Here is an extract from the HTML, showing the relevant (I hope) code:
[Code]...
Here is my code:
Dim TestHeader As String = "Referer: [URL]"
If chkRefferer.Checked = True Then
WebBrowser1.Navigate(cmbUrl.Text, False, Nothing, TestHeader)
Else
WebBrowser1.Navigate(cmbUrl.Text)
End If
Whenever I try and browse to a page with the 'TestHeader', IE opens up and goes to the page.... However, if I navigate to the same page without the additional header, it loads up fine in my webbrowser control.
I have a webbrowser control and the following code is in a for next loop. If I use wba = New WebBrowser the code works in the background and I don't see the loaded pages in the webbrowser control. My question is how can I see the results in webbrowser component with wba=New WebBrowser ?
wba = New WebBrowser
AddHandler wba.DocumentCompleted, AddressOf wb_DocumentCompleted
TheLoginUrl = Items(2) & "/test.php"
wba.Navigate(New Uri(TheLoginUrl))
results.Text &= "Login to: " & Items(2) & vbNewLine
[Code]...
I have a .net Forms Application with webbrowser control. I have a html file loaded in the control. I want to set Margins, Headers and Footers and orientation from the code itself for printing that document...
View 1 RepliesFirst off I'm using the Extended Webbrowser control from: [URL]
I use the Webbrowser control to access an ESRI web based mapping solution. When the ESRI map is loaded into an IE browser and the browser is resized then the map control resizing accordingly. When my Webbrowser control is resized the map webpage is not resizing properly.
I don't even know where to start with this problem. Is there some event that's not firing in the website? I can't simply refresh the whole website because the user may have panned and zoomed around. I want to just tell the website that the container control (Webbrowser control) is resizing now.
In my userform I have a WebBrowser control to load PDF files. I have added a FolderBrowserDialog to allow user selection of drives and or folders.
What I am trying to do now is after a file has been selected and viewed, the user may want to change drives and or folder locations. How do I remove the current contents of the WebBrowser control to be a blank screen (just like when the app starts, its blank).
I am trying to figure out if the text from a website is visible when the page is rendered in a webbrowser control. The text I am looking for is error text that shows form field errors after a bad post submission. I've checked the source code of the html being returned and the actual html for the text i'm looking for is present before any errors are made, and after the errors are detected. is there any way i can do a sort of .visible check on html elements in a webbrowser object, or even check the css that is linked to a particular div/label/span for the visibility/display style tags?
View 2 RepliesHow can I access the HTML source of IFrame within a page by using WebBrowser control?
View 4 RepliesMy VB.NET code is supposed to execute third party Javascript code in an attempt to fill in and submit a form. This process consists of five steps, and I have been able to submit the form when all the steps are kept separate (i.e. behind 5 separate consecutive button clicks). Now, what I'd like to have is one button to handle all the five steps.
The problem is that the form originally only appears after calling "webbrowser.Navigate" command, which apparently modifies the page's HTML code. I seem to be unable to detect when Javascript has finished loading the new HTML in order to fill and submit the form. I have tried a timer control to wait for a certain HTML element ID to appear, but in vain. [URL]
I'm working on a pretty simple project, just a WebBrowser app which is tailored for Webmail. I'm working on an OWA portion, and OWA normally doesn't allow the textfields on the Login page to be auto-filled. Is there a way I can force this? Search through the OWA login page code, find the fields, then fill in the fields with preset/saved data?
View 6 Replieshow to get http url request made by ajax page in webbrowser control?? i am navigating one ajax website in my webbrowser control. on one webpage there is one button which when click send http request to page, but this request is ajax, i want to capture that url whose request is send after clicking. is it possible. i think its possible coz when i use http debugger utility in mozzila called "HttpFox" it display that url.
i try to hack dom of webpage and scrap url form it but i found that the url is created by javascript variable.
How can I make the webbrowser control wait until a page finishes loading before continuing on to the next lines of codes?
View 2 RepliesWhy does CPU usage jump so high when a WebBrowser control is navigating to a page?Is there a way to drop CPU usage?
View 17 Replies1. Is there any way to disable refreshing in such a way that the button can still be used for stuff like flash on the page still? All my methods have blocked using the button in the flash which is loaded on the page....
2. Is there any way to get the new scrollbars of IE10 or metro style scrollbar or what not into the webbrowser like the desktop version of IE10 does in Windows 8 Consumer Preview?
3. Is there any way to allow the close window called from javascript to be detected & actually close the window in my program?
4. Is there any way to make it so when new window is called it will open a new window with my application in a new instance? stopping me now is it seems to want to open in the same window if I use the event NewWindow to cancel the event from happening but it gets script errors....is there any way to retrieve the link to what it needs to open so I can handle this properly? Or at least tell it what else to use? besides the default browser....I want it to open inside my own program & not IE.
I use new WEBBrowser control (VS2005) in my program (WinForm) for open web site. (VB2005)After using method "navigate", in my webbrowser control I have HTML page from some website.This HTML page has some input button with events or input text control or other interactive control on it. I can click with mouse on that buttons or input text from keyboard or select value from combo box to send this page back. question:How I can execute this from my program code, using property and methods WebBrowser control?
View 1 Replies