Create A WebBrowser Control And Navigate To A Page To Login?
Oct 26, 2010
I'm using a WebBrowser control in my current program in a bit of a bastardized way: I don't use it visually, I just use it because I'm more familiar with its events.
So, basically, I create a WebBrowser control and navigate to a page to login. Then, when logged in, I create a new WebBrowser control and navigate to a different page.
I've used this program for four months with no difficulty. Starting today, though, the second phase of that has been going really, really slowly. What used to take 3-5 seconds is taking 25-30 seconds. It still works eventually, it just takes a while.
Usually I would assume this was a server problem. However, navigating to the exact same URL in Firefox happens extremely quickly. Weirder still, within the program there is a user WebBrowser control -- I can copy/paste the URL the previous (not visible) WebBrowser was navigating toward into this user WebBrowser, and it goes just fine.
What in the world could be holding up this other "custom" WebBrowser? I don't even know where to begin in diagnosing this.It might be important to note that the site this is working based off recently underwent some changes -- but I can't imagine why that would affect only these "custom" WebBrowsers and not the user one in the same program.
View 3 Replies
ADVERTISEMENT
Nov 29, 2009
I use the webbrowser control to navigate to certain websites and login and retrieve some data. For that I created a sub for each website. On the form i have a button that calls every sub when clicked. The problem is that I don't know how to pause or stop the process once started. If I quit the program it will still run in the background until all calls complete. I tried to use a thread, but that doesn't go well with the webbrowser control.
View 15 Replies
Apr 5, 2010
I'm using a webbrowser control in my program and I navigate to a page that uses sessions. I need to delete them somehow and I tried to close IE and enter it again and it worked, the sessions were deleted. But I've done it manually, and I need to do it through my program, so is there a way to imitate the closing and reopening of my webbrowser control?
View 3 Replies
Apr 5, 2010
I'm using a webbrowser control in my program and I navigate to a page that uses sessions. I need to delete them somehow and I tried to close IE and enter it again and it worked, the sessions were deleted. But I've done it manually, and I need to do it through my program, so is there a way to imitate the closing and reopening of my webbrowser control?
View 10 Replies
Jun 13, 2011
How can I get Webbrowser1 to navigate to each page and wait for the one page to completely load, then move to the next page...? [code]
View 3 Replies
Mar 13, 2010
I'm working on a pretty simple project, just a WebBrowser app which is tailored for Webmail. I'm working on an OWA portion, and OWA normally doesn't allow the textfields on the Login page to be auto-filled. Is there a way I can force this? Search through the OWA login page code, find the fields, then fill in the fields with preset/saved data?
View 6 Replies
Dec 6, 2010
Is there a way to check to make sure that you dont get a "page not found" error during a webbrowser.navigate call?
View 2 Replies
Jul 23, 2010
I have a VB.Net project that creates a new Webbrowser instance which then navigates to a page in order to read the HTML into a variable ( then modify this before displaying in a visable webbrowser).The issue i have is that the webbrowser navigate just reads the page from the cache and does not read it from the server.
View 2 Replies
Sep 3, 2009
I would like for my program to navigate via textbox1.text with multiple lines and multiple url links inside of it. I know how to make the webbrowser1.navigate via textbox1.text with multiple lines, however I want my webbrowser to navigate to each url every 1-1.5 seconds once button1 is clicked. Yes, my webbrowser1 will navigate to the specified urls via the textbox1.text (multilines) with a button click, but I need the webbrowser1 to navigate in a order sequence from top to bottom of Textbox1.text (multiplelines) every 1 second. Here is the current code that I have to navigate via multilined textbox1.text control in order sequence:
[Code]...
View 4 Replies
May 13, 2009
I'm using a webbrowser control to pull some information from a website. It works fine.I load the web page when the user clicks a button and then I pull the information from the site when the page completely loads. I have this bit of code in the DocumentComplete event.I am doing this for two different websites. So, my code as it is, looks something likes this:
vb.net
Private Sub btnStart_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnStart.Click
WebBrowser1.Navigate("http://www.website.com")
End If[code].....
If I add a second Navigate to the same WebBrowser control, and then add another Document. GetElementById line, using different variables, it doesn't work.Its obvious that it loads both sites and then it finishes. So, it never has time to finish the first load and then pull the info into the text box.Is there a way to do this? To load the first site, pull the info, load the second site, then pull the info from there?
View 7 Replies
Nov 4, 2008
in my form load, I have the web browser control navigate to a site. What I'm trying to do is when a user clicks button1, i want the program to look through the webpage and check if there is an image source equal to a static URL that I assign. this is basically just navigating to a website & checking if a certain link exists.
View 10 Replies
Feb 24, 2011
For the past couple of days I have been using Visual basic 2008 and learning it.Anyway, I am trying to make a login form that will login to a website with WebBrowser control.and I am noticing that the webbrowser is extremly slow, it takes him about 20 seconds to load a page while mozilla opens it in a moment, why is that?
View 6 Replies
Oct 1, 2009
Creates a webbrowser in a background thread, then is supposed to navigate to a url and return a htmldocument, but the navigate fails for some reason
NOTE: this is part of a class where you see ME.url or me. ... me.isrunning = boolean false by default me.url = uri of location to navigate to
Public Function GetDOC(ByVal url As Uri) As HtmlDocument
If Me.IsRunning Then
Throw New Exception("Object Currently In use")
[Code]....
View 2 Replies
Jun 26, 2011
I am using webbrowser control to automatically navigate through facebook.Nothing malicious, just an experiment of sorts.Im working on a bot that that would extract the names of all friends on my friends page, open up those pages, extract their friends names, and repeat.The end result would be a chart of who knows who. A sort of 'six degrees of separation' experiment.I have everything automated up until getting to my friends page and I am having trouble extracting the urls from my friends page. [code] Now, I figure I can extract from <div class=fsl fwb fcb">, but Im confused as to how to go about doing this. On another thread, someone said it cant be done with webbrowser control, but im new automation.
View 11 Replies
Jan 14, 2011
url...only after you have logged in (because then you can see your collected points)How can I do this? I tried the &password=.... thing after the url didn't work I also tried with [code]this would work but it's complicated because then you'll need to check if you are logged in, log in through webbrowser and then get source page, I think it should be possible faster..also how can I check if the page is completely loaded in a webbrowser control? now I usually go to a webpage and then continue my code in the [code]but this become complicated if I want to go to another website after that because then it starts from the beginning again and I need goto statement, etc this is really annoying and complicated after a while
View 1 Replies
Feb 23, 2010
VB 2008
CODE:
This code works fine but not always , Sometimes when the net is down or some downloading is going on either on Lime wire or any download manager , The application navigates to the page but then don't login. I also tried using threads but that didn't work as well.
View 1 Replies
Jun 13, 2011
I'm trying to login to the mobile login page for hotmail.com. I want to login to each account, I have them in a multi-line textbox1 in username : password format (no-spaces) on new lines. It loops through all the accounts before the page is even loaded. and when the page has loaded, it logs into the hotmail login from the last login details at the end of the textbox, instead of going from first to last. It's not clicking submit button either, its just showing the username and password looping in the inputs. Not submitting at all. The submit button code is right. I know it works. So thats not the problem.
Here is my [URL]
View 8 Replies
Aug 24, 2008
I want to make something that can on button click navigate to a page, wait the time I specified and navigate to another page..
[CODE...]
This does not do what I thought it would do..I think that the problem is that when it sees System.Threading.Thread.Sleep(5000) everything stops for 5 secs .How can I make it go to google.com and then after 5 seconds, yahoo?
View 7 Replies
Apr 11, 2009
How do I automate a web page (e.g. retrieve page text, login website, search, click button or hyperlink) via WebBrowser?
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Welcome to the All-In-One Code Framework! If you have any feedback, please tell us.
View 1 Replies
Apr 5, 2011
I would like to create a secure login page for a pre-defined set of users (so no creating username/passwords by the users themselves). I've looked up a few sites and they all seem to suggest using Microsoft's Membership or something. I am not very sure as to why that's used, but all you need to know is that I will be creating the login details. I just need to make the login secure, ie, no duplicate logins, no logins from different browsers and cookies and sessions and encryption and all that. Any one have the code/links to where I can get all this?
View 1 Replies
Aug 22, 2011
I am using webbrowser control for automate login in https://www.itslb.com/tms/ website i have written code also but password input box doesnt hold any value username hold this my code like below
Dim frmform As HtmlElement = WebBrowser1.Document.Forms("aspnetForm")
frmform.All("ctl00_lnkLogin").InvokeMember("Click")
frmform.All("ctl00_txtUserName").SetAttribute("value", sUserID)
[code].....
View 1 Replies
Dec 13, 2010
I had a problem with WebBrowser component. Basically, it works improperly when try to log in on one web-site (Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site). I am working with Visual Studio 2010 Professional. I created a simple WebBrowser trying to access the indicated web-site. The problem begins. Well, the website loads, but when you go to the login page (Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site) and try to log in, it doesn't work. I mean, when I enter the login details the login page just refreshes itself and the login wasn't proceed. The same login page appear with every login attempt. The is the current problem!I check with Google, it works. But, it doesn't work with Forex Trading Social Network | Online Forex Trading Forum and Social Networking Site! Why?
View 14 Replies
Dec 9, 2011
I am using Visual Studio 2010. I can connect to my MySQL datababse no problem by clicking my login button.Now I can't figure out how to query the database and check if username and password are correct, and switch to a different form, to display the data loaded from the database.This is Login.vb Form
Imports MySql.Data.MySqlClient
Public Class Login
Dim conn As MySqlConnection
[code]....
When the login is completed, and username and password are correct, I want it to load Main.vb.
View 1 Replies
Sep 4, 2009
I am trying to automate login and navigation to a website using the WebBrowser control. I can successfully logon to the site using the wb control but after that I can't seem to get access to the newly loaded document's elements within the same routine. I check for ReadyState Complete and IsBusy but they don't seem to be working. There don't appear to be any frames being used at all so I can't figure out why this won't work. I know that the wb control is successfully logging in because I can see the page load in the wb control. However, after the page loads I try to access the HTMLDocument for the new page (after logging in) and it is either set to Nothing or it's the previous page's HTML. I've tried putting in a Sleep to wait for the page to finish before trying to access the HTMLDocument on the new page but it still doesn't work. If I create a button on my form that accesses the HTMLDocument and click it it works fine. I can't figure out how to ensure that the entire page has finished loading within my routine. I tried putting a switch into the DocumentCompleted event but that doesn't work either.
View 2 Replies
Jun 3, 2011
i want to get the html Source code of website,it something like:wb.Document...
View 13 Replies
Nov 5, 2010
I know it is possible to save a page viaWebBrowser1.DocumentTextI want to save the current loaded page in webbrowser controlin the same way i.e. does,creating the mypage.html and the associate dir mypage_filesthis way I also save images
View 2 Replies
Nov 15, 2009
Have experimented, but none of them has worked.
View 16 Replies
Jan 10, 2009
I have a web browser control, what I use is:
Ret = (MainBrowser.ReadyState <> WebBrowserReadyState.Complete Or MainBrowser.IsBusy)
If ret is true, not loaded, otherwise, loaded. It works fine on winxp, however, on vista, most times, it works, sometimes, not. Do I have to use documentcomplete for this? The page is loaded from another thread, does it matter?
View 4 Replies
Dec 17, 2009
I am navigating to a web page with my webbrowser control
[Code]...
and this works on most pages. Now I'm going to a page that I guess there are errors in the page and I get a box asking me if I want to debut in IE's built in script debugger or something to that effect. Is there any way to have the system ignore this message and continue to load the page as normal
View 3 Replies
Mar 20, 2012
Hi,I need to see if a webpage displayed via the web browser control contains certain words .I've tried parasing through the html but that contains too much junk html and css tags which caused problems(I've tried using regex to remove them).That was done by using property webBrowser.document.Body.InnerText.contains .
Are any way to search through the actual text on the webbrowser and not html via the program in ways similar control-f function on most webbrowser but using code to do that ?
View 4 Replies
