I have seen several threads about automating several aspects of html elements (buttons, textboxes, checkboxes, radio buttons etc...) but I didn't see any specific codes to auto-click "Hyperlinks". How would I invoke a click on any hyperlink located on any given webpage if I needed to?
I am trying to automate login and navigation to a website using the WebBrowser control. I can successfully logon to the site using the wb control but after that I can't seem to get access to the newly loaded document's elements within the same routine. I check for ReadyState Complete and IsBusy but they don't seem to be working. There don't appear to be any frames being used at all so I can't figure out why this won't work. I know that the wb control is successfully logging in because I can see the page load in the wb control. However, after the page loads I try to access the HTMLDocument for the new page (after logging in) and it is either set to Nothing or it's the previous page's HTML. I've tried putting in a Sleep to wait for the page to finish before trying to access the HTMLDocument on the new page but it still doesn't work. If I create a button on my form that accesses the HTMLDocument and click it it works fine. I can't figure out how to ensure that the entire page has finished loading within my routine. I tried putting a switch into the DocumentCompleted event but that doesn't work either.
I am new to vb 2008, but I know how to automate some html elements. The issuse that I running into is that I cannot get my webbrowser1 to auto-click the "Gmail" button at the top left of the page or the "Show me my account" button on the righthand side of the webpage. Here is the webpage that I'm trying to auto click: url...Can someone please view the html source and give a code sample to click either button so that the page can then go on to the following page?
I am making an application that will save all the names of the movies in my "movies" folder on my computer. I am able to make a list of all the names quite easily, but how would it be possible for me to search The Internet Movie Database (IMDb) for the title of the movie, click on the link of the name of the movie and grab information of the movie off the imdb database (Run time, rating, and plot?)
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click Dim MyElementsWeb As HtmlElementCollection = WebBrowser1.Document.All For Each LogBtn As HtmlElement In MyElementsWeb
I have a VB program that uses a web browser control to navigate some websites for me but I need to click a button.
The button is in a frame and in a form with 4 buttons. I have already figured out how to navigate the individual frames and forms but I can't figure out how to click the button I need.[code]...
I am trying to log in to [url]... the MSN specifically, and i am able to fill in the username and password box but i can't seem to get vb to click the login button.[code]...
I am developing a program that will get specific hyperlinks, using regular expressions, from a website. It follows by visiting those chosen links and it loops through each one. Each time it has to navigate to that url to click another link in order to obtain information about that link.
The "chosen" links have been collected in a database. The fields of the database are "hyperlink" etc. and below is a prototype of what I planned on doing. Unfortunately I get this runtime error: "Object reference not set to an instance of an object." on the line indicated in the code.
For Each Record As DatabaseDataSet.Table1Rows In DataBaseDataSet.Table1 Dim website As New WebBrowser 'Navigate to the "chosen" link found in the field "hyperlink" of record website.Navigate(record.hyperlink)
i have 2 textbox for name and password and a buttonthere 2 table, one admin and one customerafter i enter the customer name and password , it verify whether empty or incorrect password , if correct it will go to the customer pagehowever if i enter admin name and password and after verify it should go to the admin pagei am only able to allow use one table for the login ? so how should i change the code below?
Protected Sub btnLogin_Click(sender As Object, e As EventArgs) Handles btnLogin.Click If String.IsNullOrEmpty(txtName.Text) Or String.IsNullOrEmpty(txtPassword.Text) Then Failure.Text = "Invalid User Name and Password. Try Again."
I am using a WebBrowser-Control to fill in a webform and then click at a button, this currently results in a standard Download File Dialog (you get these if you download a file using internet explorer), but instead, I have to catch this file and save it automatically with a by me defined name to a specific folder.I am trying to code a little application in vb.net which download the Export-file from my wordpress-blog, and I want to do this completely without user-interaction.Currently everything works, except the downloading of the file.I tried to catch it with the event System.Windows.Controls.WebBrowser.Navigating(ByVal Object, ByVal System.Windows.Navigation.NavigatingCancelEventArgs) but I don't see where to download the file from?
I'm working on a pretty simple project, just a WebBrowser app which is tailored for Webmail. I'm working on an OWA portion, and OWA normally doesn't allow the textfields on the Login page to be auto-filled. Is there a way I can force this? Search through the OWA login page code, find the fields, then fill in the fields with preset/saved data?
I have a hidden web browser, two text boxes, and a button. I can add the login information to the forms on the web page, but how do I login? Heres my code so far
[Code]....
Basically I want to grab the ID of the sign in button (the name/id is SI) and click it. I've tried RaiseEvent(Click) and Click() but neither work...I'm not sure about the syntax and how it works in general....I don't even know if I'm doing it right.
For the past couple of days I have been using Visual basic 2008 and learning it.Anyway, I am trying to make a login form that will login to a website with WebBrowser control.and I am noticing that the webbrowser is extremly slow, it takes him about 20 seconds to load a page while mozilla opens it in a moment, why is that?
I am trying to loop through the class atributes on any a href on the html page, and then click the link if it matches a class type, but nothing seems to click.Here is what i have.
Dim links As HtmlElementCollection = WebBrowser1.Document.GetElementsByTagName("a") For Each link As HtmlElement In links If link.GetAttribute("class") = "mlm
Working with dynamic button. So if i have 5 buttons created dynamicly, i can get alot of information from the button click of that button. You click a button on this app, it will show the name of the button.
But now I want, lets say button 4 to click at 4:45 pm today. Normally I would do something like compare a string to "4:45", and when true, then button 4.Perform_Click.
But button 4 is dynamic, so how do I call that button in my code. How can I address it. I know it will be there when the program is running, I just don't know how to get to it in code.
Now I do have the button names in a database, so I can get the name that I want from there. Just not sure how to tell it, "Do a perform click on button 4" The code below is my test bed, so If you click the main button, it will create a button, and a timer. Click the button that was created, and it will show the button name.
I use new WEBBrowser control (VS2005) in my program (WinForm) for open web site. (VB2005)After using method "navigate", in my webbrowser control I have HTML page from some website.This HTML page has some input button with events or input text control or other interactive control on it. I can click with mouse on that buttons or input text from keyboard or select value from combo box to send this page back. question:How I can execute this from my program code, using property and methods WebBrowser control?
I'm making a winform program to automatically login to a website and then do a search on the site. Problem is, it works for one site but not for another.
Here's the code:
Code: Dim cookies As CookieContainer = New CookieContainer Try
I am trying to automate a process I do with a bank with vb.net. Basically I need to open a website and navigate through it (Automatically through the program obviously), enter a batch ID and enter a file path and name. For some reason when I get to the part where I need to enter the file name and path, it simply will not populate the text. I have attached a word document with screenshots and code. The only difference I can see, is that in the bank website's code the the input type for the file text is "FILE" rather than "TEXT" as it is for the batch id...
I am new to ASP.net 4.0 and am learning and writing a web site application in VS 2010 that will eventually become our company's intranet web site. As part of the start page, I want to display the user's name in a welcome message like: "Welcome: E Young". The user's login name should come from their Windows login when the log into their computer. Once logged into their computer, they will then start IE8 and access our company's intranet. The start page of our intranet site should display the user's windows login name.
The company's intranet is being hosted on a new, virtual file server that is running Windows 2008 R2.I installed IIS 7.5 and have attempted to configure it but I am new to IIS 7.5 also. The users will access the company's intranet via IE 8 using the url for our intranet site. I am developing the ASP.net web site using VS 2010 on my development computer then transferring the files from my computer to the new intranet computer's C:Inetpubwwwroot folder.
That all seems to be working fine except for the Welcome message. When I run the web site project from my VS 2010 IDE on my development computer, I can see my Windows login name correctly displayed on the web page. However, after I copy the two web site files from my development computer to our intranet server's wwwroot folder, then attempt to show the intranet web page from my development computer using IE 8, nothing is displayed. Put another way, my Windows user name displays correctly in VS 2010 IDE on my development computer but not from our intranet. The web.config file has authentication mode="Windows"
IE 8 does have windows authentication enabled on my development computer as does IIS 7.5 on our intranet server yet the web site is not able to pickup the user's windows login name and display it for some reason.
When I look at the Authentication window in IIS 7.5 it only shows the following three authentications: Forms, Anonymous, and ASP.Net Impersonation. I ran a command line program that turned on Windows Authentication, but it does not show Windows Authentication as enabled in the Authentication screen in IIS 7.5. The three authentications I just mentioned are disabled.
recently I've been going through some website login automation and ended up with creating a simple my own browser quite happily, to open websites and login straight away.
But I found out that I can't automate some of the websites I was going for, because the html code of the login forms is not shared and cannot be seen in the source.So I'll give you guys a couple of websites I can't deal with and please advice if it is possible to do stuff with them:[URL]...
I have searched google and couldnt find any answer. Is it even possible to login to a website using background worker without having to use webbrowser?