I have a method that allows a user to open a file. The InitialDirectory property is set at the beginning of the method. If the user selects a file in a different folder, the next time the dialog opens, it opens to the last folder used insted of InitialDirectory folder.
View 9 RepliesI have a application which reads from ini at startup, What i want is a vb code that will block the user from opening the ini file manually, program could be running as service eg: C:config.ini. program should block the user from opening the file.
View 1 RepliesI have a excel file place on server. I am using a application which written by VB.NET to open file in read only mode. User 1 open file in read only mode. How can user 2 detect that file is open or not status?
View 2 RepliesI want to create a small application in VB.Net which will zip the file such that when user will unzip this file, a url will be opened in user's default browser. Is there any way to create such files?
View 4 RepliesOpen a pdf file with user password in vb 2008
View 6 RepliesI have the following code that generates a csv file on a button click. [Code] What I want to do is open a download dialog box that will allow the user to open or save that file it has just created.
View 2 RepliesI have a notify icon that uses balloons t notify the user of certain events. In some circumstances I would like to open a file or program when the user clicks on the balloon. The default behavior is to close when the user clicks the balloon. How can change this?
View 1 RepliesI have a WinForms application that I have taken over support for and it was build using Visual Studio 2005 with VB.Net. The application makes use of an Access database. It runs fine when it is installed as a standalone application, but the install cd for the application also allows for a network install and this is where I am currently encountering issues.
To test the network install I created a folder on my server (Windows Server 2003 SP2) and copied the Access database to this folder. I created a share for this folder and gave everyone full permissions to the share. Then on the workstation I installed the application and gave the path to the database as follows:
\myservermysharemydb.mdb
(The install steps here are as per the instructions given on the installation cd)The workstation that I installed it on is Windows 7 Ultimate. When I run the application, I get the error message given in the title when the application tries to read the database file. I have confirmed that I am able to write to the shared folder on the server, so I don't think this is a permissions issue. Also, the database file is not in use at all, so it is definitely not opened exclusively.
UPDATE:I have tested the workstation installation on a computer with a fresh install of Windows XP SP3 and it is able to access the database file without a problem. So it seems that this error that I am getting is somehow specific to Windows 7. Is there maybe a known issue with Oledb drivers on Windows 7? My version of Windows 7, btw is 32 bit.
This is a simple fragment of my code:
[Code]...
The last line throws an exception "Cannot open file" with certain end-user profiles. It works perfectly fine when executing from an Admin account. I just cannot figure out what user privileges and access settings may cause the error. Note that it also works with some end-user accounts (not admins). What missing user rights can cause this?
I have a project that will add the conents of a .txt file to a listbox but how would I make the program to open a browse for file dialog when a user click a button and then add the file to something to be read from like:
Dim accpath As String = My.Computer.FileSystem.ReadAllText(System.IO.Directory.GetCurrentDirectory() + "\somefile.txt")
The specific features I want to produce is it doesn't place on the form, it places in the little box at the bottom and when CustomUserControl.Show() is called it shows as a dialog boxI'm sorry if I misspelled something or my grammar is wrong, I've never done well in those subjects.
View 1 RepliesHow do I open a particular html page in a chm file when the user clicks on a menu item.
View 2 RepliesI've written a VB.NET program for a client that stores all of its data in XML files. I use the XMLReader to read the data into a dataset. When I run the sub to encrypt the XML file, I'll get the following message: Error: mscorlib: The requested operation cannot be performed on a file with a user-mapped section open.
It doesn't happen all the time, so I know it does work. But on occassion, I'll get this message. I've been all over the forums and I've tried everything I've read to try and stop this error.
I close the reader object and set it equal to Nothing. I've even tried using DoEvents to make sure the object finished closing before running the Encrypt sub. Nothing has helped.
I develop on a x32 PC. It works fine on the development machine. But then, when the client runs it on a x64 PC, he gets these errors. Could the x64 system really be running so fast that the .Close() and the = Nothing and evern the .DoEvents() can't keep up?
I want to open up an existing instance if my program is already running only if its running the same version.I noticed that this question was asked for only if the name exists, but what if the version is older, I just want to notify the user that an older version is still running, "please remove older version before starting this version."The other link is this one:Return to an already open application when a user tries to open a new instance but they don't talk about closing an instance if an older or newer version is detected.
View 3 RepliesI want to open up an existing instance if my program is already running only if its running the same version. I noticed that this question was asked for only the the name exists, but what if the version is older, I just want to notify the user that an older version is still running, please remove older version before starting this version. The other link is this one: Return to an already open application when a user tries to open a new instance but they don't talk about closing an instance if an older or newer version is detected.
View 1 RepliesCan I safely move ReferencePath information from a .vbproj.user (or .csproj.user) file into the corresponding project file? Note: All developers will be using developing from the same location on their machines.We'd like to allow users to maintain their own settings for other things, but have this basic info be setup once and checked into source control to be shared to all.
View 1 RepliesWhy would a .sln solution file open and appear empty in Microsoft Visual Basic 2010 Express - i.e. no windows showing projects and code files etc.When I inspect the file in a text editor, it contains references to vbproj files (which are present) which indicate that it should not appear as empty.No error messages are reported when the file is opened.
View 2 RepliesI would like to open the excel file after create the excel file. The creating file function is done, but the system unable to open the excel file. My coding as below:
Dim xlApp As Excel.Application
Dim xlWorkBook As Excel.Workbook
Dim misValue As Object = System.Reflection.Missing.Value
[code]....
how to use open file dialogs to open a file to a text box?
View 6 RepliesI'm using Visual Basic Express 2010 and SQL Express 2008 in Windows XP. At first I couldn't add a datasource (the .mdf file for the database) because of a "Operating system error 32" which I seemed to have resolved by giving myself full permissions for .mdf file (by right clicking on the file and going into properties and then Security) and restarting the SQL SERVER (SQLEXPRESS) service. The dataset for the database is in my solution explorer but when I right click on a table adapter to add a query and attempt to open up the query builder, I get the error in the title above.
View 1 RepliesI've noticed that when you click on a web page in Windows Explorer, or open a file in general, and the default application to open it is internet explorer, ie opens and opens the file. However, when I tried this on my Web Browser it opened, but ignored the file and went on its usual routine. How can I get my Web Browser to open and open the file that was clicked on in explorer?
View 1 RepliesI saved a file with the extension .doc. I use the RichText to write and save the text. I did not set any encoding type when I saved it. When I tried to open the file in the Richtextbox again, I got all the formatting characters in the RTF file. How do I correct this? How do I open and re-open a .doc file in the Rich Text box control without the formatting showing up in the box with the document contents?
View 4 Repliesim having a slight problem with my open file dialogue box, i need to be able to open the dialgue box, and click the file and open in my pdf reader, or at least load it to my other form ive created. what ive go so far:
[Code]....
I'm using Visual Basic Express 2010 and SQL Express 2008 in Windows XP.I created a database on my local PC HDD. At first I couldn't add a datasource (the .mdf file for the database) because of a "Operating system error 32" which I seemed to have resolved by giving myself full permissions for .mdf file (by right clicking on the file and going into properties and then Security) and restarting the SQL SERVER (SQLEXPRESS) service.The dataset for the database is in my solution explorer but when I right click on a table adapter to add a query and attempt to open up the query builder, I get the error in the title above.
View 10 RepliesI like to open a file. The open option should be shown in a separate window. My code works fine but the open window is not displaying to open a file. Here is the code:
private void OpenMyFile()
{
string path = GetPath() + ViewState["fileopen"];
[Code]....
I design photo viewer app using this code
[Code]...
now how to make my photo viewer open when user open drive C and get all photo in the drive to be shown in it ?
I have made an app and I want to add it to " open with menu" sub menu which appears when user make right click on any file ie I made photo viewer app and I want to add it to "open with menu" so user when make right click on any photo and go to "open with menu" sub menu will find my app name to chose it to open the photo with it
View 7 RepliesHow do you open a document as another user? The document type is unkown (could be pdf, .xls, .doc, images etc). Document is on a network share, username, domain and password are all known.
I have thoroughly researched this question and I do not beleive the question has been answered here. Please prove me wrong. This question gets close Open a shared file under another user and domain?
But unfortunately it opens the file to a filestream, I need to open the file in its associated application.
(Visual Basic )want to open a user control in a tab page..i added two panel in tab page.in left dock panel i put some buttons i want to open a user control in right dock panel when click on a button in left panel
what command i should writ in button click..panel are not splitcontainers panel...
I have a workbook (Workbook1) that runs through some steps using visual basic, which ends up opening another workbook Workbook2). Once Workbook 2 is opened, I need to copy a section of data from it, into Workbook1 int a specific worksheet. I was able to do this by recording a macro, but the challange is, the name of Workbook 1, and Workbook 2, will vary by User. When I created the macro it uses the files as they are currently named. The section of code is below.
[Code]...