Asp.net - Error Cannot Have Multiple Items Selected In A DropDownList?
Mar 14, 2012
This is my code and i am getting an error ..Cannot have multiple items selected in a DropDownList. when the page loads it select "ALL" in DDLModality but when i change DDLModality.selectedvalue to any "value" then no error but again when i change to "ALL "getting the error.
onchange of DDLMODALITY submit the form
form1.target = "";
form1.action = "";
form1.submit();
I would like to disable a specific items from DropDownList. I have below code but it does not working. DropDownList have 5 items.And,I'm getting error:Index was out of range. Must be non-negative and less than the size of the collection.Parameter name: index
Protected Sub CheckBox1_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged Dim X As Integer = 0 <> 1 DropDownList1.Items(X).Enabled = False End Sub
But, if I add a different value for X, then it disable 1st and 2nd item.
Protected Sub CheckBox1_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged Dim X As Integer = 0 or 1 DropDownList1.Items(X).Enabled = False End Sub
My goal is if I would have a 365 items in DropwDownList to disable items for example between 120 and 150.
i used the following technique to Select multiple items from DropDownList into TextBox with No duplicates, however i dont think it is the most proper way,
pressing again with same value selected choose another value from DDL and press button
here is my code Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button2.Click If TextBox2.Text.Contains(DropDownList1.SelectedItem.Text) Then
I would like to disable a specific items from DropDownList. I have below code but it does not working. So, need someone to told me what I'm doing wrong. DropDownList have 5 items.And, I'm getting error:Index was out of range. Must be non-negative and less than the size of the collection.Parameter name: index
Protected Sub CheckBox1_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged Dim X As Integer = 0 <> 1 DropDownList1.Items(X).Enabled = False End Sub
But, if I add a different value for X, then it disable 1st and 2nd item. Protected Sub CheckBox1_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged Dim X As Integer = 0 or 1 DropDownList1.Items(X).Enabled = False End Sub My goal is if I would have a 365 items in DropwDownList to disable items for example between 120 and 150.
Im trying to make the below statement as such if there is no items selected/blank then the search term is a wild card (all results) otherwise search it. the sql below only works when all fields match, not partial
I would like to set the selected item in the combo box. It is working, If the dropdownstyle is dropdownlist. But not working, If the dropdownstyle is dropdown. How to make it work when the style is dropdown?
I have a DropDownList that pulls values from a table in sql server. I want the dropdownlist to populate the list of values based on a selection by the user but also display the contents of the rest of my table in case they need to change something. For ex:
ddl1 has values of: 1, 2, 3, 4, 5 user selects 5, so the value displayed in ddl2 is five, but if you exand the ddl2 you will also see the values of one, two, three, four...
This is the code in my load event...
If Not IsPostBack Then result = dal.dbConnect(DAL.dbType.SqlServer, ConfigurationManager.AppSetting("SQLServerConnection"))
I have an application to display the records of the customers. I am using the wizard to do the edit and delete of the records. In one of my column consists of dropdownlist. When I wanted to edit the changes by selecting the dropdownlist, it didn't display anything after I selected the changes. I have to make changes because my friend did not finish up this part which selecting the selected item to make the editing of the records.
I am trying to split the selected value of an dropdownlist into an array for updating and I don't know what to do here.
Here is my code: Protected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim FirstName As TextBox = CType(UpdateJob.FindControl("FirstName"), TextBox) Dim LastName As TextBox = CType(UpdateJob.FindControl("LastName"), TextBox) Dim Address1 As TextBox = CType(UpdateJob.FindControl("Address1"), TextBox) Dim Address2 As TextBox = CType(UpdateJob.FindControl("Address2"), TextBox) [Code] .....
I have two dropdownlist, one is State and one is City. When a State is selected, the City dropdownlist becomes populated. At that point you can select a city, however if you select a city and go back and select a different state, the city dropdownlist is populated by the cities for both states. How do I get it clear the cities for the first state?
Here is the code behind
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load End Sub
I'm designing a web page with two dropdownlists, one for the Make of a car, the other for the Model, both bound to a database with separate SQLDataSources, and using a distinct statement. I add "All" at the top of both by setting appendDataBoundItems = true and adding items named all. Then when I fill the Make with a querystring all the model items get added twice (but only the databound items).
I have a repeater with a dropdownlist in it. When a user changes its index, I would like a label to change its value. (the ddlSizes values come from a MySQL DB)
I have to hidden buttons on my page that I can trigger using JavaScript (__dopostback...). I also have a list of object on my page and a dropdownlist giving the user the possibility to sort those objects on the page. My code checks the current value of the dropdownlist on Databind of the list and applies the chosen sort method to the list. The first button is triggered when the user has selected another sort method from the list.
The second button is triggered when the user adds a new item to the list. Sortmethod "sort2" should be set automatically in the dropdownlist if this happens. So when the second button has been clicked, I need to set the selected item of the dropdownlist dynamically so I can check the value of the selected value later in the DataBind method of the dropdownlist and know what sort method should be applied.
I don't succeed in changing the selected value dynamically. I'm using to controls: First is the objects.vb and the second is the ObjectContainer.vb. Objects.vb contains the two buttons, the dropdownlist and an instance of the objectcontainer. The objectcontainer contains the list with objects that needs to be sorted based on the value selected in the objects control.
Objects.vb: Private sortMethod As DropdownList Private container as ObjectContainer Protected Overrides Sub OnInit(ByVal e As System.EventArgs) MyBase.OnInit(e) EnsureChildControls() End Sub [Code] .....
I have a autocomplete dropdownlist(ddl) in my app. When ever I click on the ddl and start typing to find the item I am looking for in the ddl. The ddl is expanded to show all the orders when typing. After I press the enter key to go out and get the order information for that order the Order number in the ddl is missing but here is the weird part. When I don't have the ddl expanded but still have focus on the ddl. When I find the order I need and press enter. The order number is showing in the ddl as the selected one after it has loaded up the order information.
I have an Web application that retrieves some db info and send it out to an html table. All created on the fly in vb code behind. For every post (row) in the db I also fill puts an instance of a Dropdownlist with items read from the db. That means that for every row I read from the database I read the same db info into the Dropdownlist (see the skeleton example below). A lot of overhead I think. It must be possible to create the Dropdownlist once before the loop and copy from that instance in the loop.
Partial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim cboCombo2 As DropDownList Dim i As Integer [Code] .....
I have a bit of a tricky scenario. It consists of some partial problems for which I have individually found solutions, but I couldn't find anything that makes it all work together smoothly.
-Upon selecting an item in a datagrid, a new page loads with the details regarding that entity. -The entity represents a product that can have any amount of variants (such as a t-shirt's color or size) -I dynamically add dropdownlists to this detail-page that represent these variants (there can be any amount of variants, and each variant can have any amount of different values, each value or combination or values from different variants representing a unique product entity) -Upon selecting a different variant in a dropdown, a delegate is called that will change the session variable to the productId associated with the selected variant and a postback is fired that will reload the page with new data based on this productId
The problem: the postback is fired BEFORE the dropdownlist's (OnSelectedIndexChanged) delegate is called. Since this delegate defines the productId in the session, the new to-be-used productId isn't known at the time of postback.
Result: loading the correct data in the page is always delayed by one postback. Each time I change the selected index of any of the dropdowns, the page is loaded with data based on the session variable that the PREVIOUS OnSelectedIndexChanged delegate of the dropdown set.
I have a LoadData() method that sets the values of all textboxes, fields, labels etc. based on the productId stored in the current session. This method is called on Page_Load. Private Property CurrentProduct As Product Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load LoadData() [Code] .....
It seems that I haven't been completely clear on what does and doesn't apply to this scenario regarding Page Lifecycle.
1) My dropdownlists are added dynamically, which works fine on the first page_load. 2) The content of the dropdownlists is defined by what entity's details i'm loading on the page. 3) What entity's details I'm loading on the page is at first(not-postback) defined by the product I selected in a gridview in the previous page. 4) At postback, this entity is based on a sessionvariable containing the id of the entity. 5) This session variable is defined by what item in the dropdownlist I select. 6) This dropdownlist dissapears after postback since it's not defined on the page, but dynamically. So is the event.
So my guess would go towards some clientside script that stored the selected value before postback, but then I would be clueless on how to get that variable to the server since the logic that retrieves the entity is in the business logic layer which is far away from this page..
In my Windows Form I have a ComboBox that is filled by a Stored Procedure with a list of names. I have the Combobox set for AutoComplete to "Suggest" and From "ListItems". When a user starts to type in and the AutoComplete does not find any matches in the listitems the user can tab out of the ComboBox and leave what they typed in the combobox even though it is not one of the Valid Items. Is there a way to check the Comboxbox to make sure of of the selected Items has been selected?
Im using Visual Studio 2008 (ASP.net) to build some web pages..
I have a DropDownList linked to a DataSource from data base to fill it automaticly, and it works perfect, but I want to modify the items before its displayed ?
I am trying to use datasource and bind in my application to set a dropdown list to the results of a query. The dropdownlist populates correctly (shows each different type_name in the set) but later when I use ddltype.selectedvalue - I am always getting the value from the first item in the dataset. Here is the code.
I would like to show different values in a dropdownlist, while editing a gridview, depending on which user is logged in. For example...
The officer would see "Approved by Officer" status. The director would see "Approved by Director" status
I am trying to add these programatically to a dropdownlist which I have in the edit template of my gridview (approvalsGrid). Here is my code:
Protected Sub ApprovalsGrid_RowUpdating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewUpdateEventArgs) Handles ApprovalsGrid.RowUpdating Dim ApprovalEditDD As DropDownList = CType(ApprovalsGrid.Rows(ApprovalsGrid.EditIndex).FindControl("ApprovalEdit"), DropDownList)
[code]....
I do not get any errors. But get an empty dropdown with no items. Am I using the correct event?
I have a dropdownlist with a list of options which is subject to change (e.g. 'active users'). Another data source may include historical data, but I wish to use the 'active users' dropdownlist against it. This means an ArgumentOutOfRangeException will be thrown so I want to catch that, and insert the required entry into the dropdownlist on the fly.
I've seen a few suggestions that point towards overriding the ondatabinding event within the dropdownlist, I've managed to do this insofar as I can create a static listitem for example "Value does not exist" and bypass the exception. However I wish rather than "Value does not exist" so show the actual value which we were attempting to find in the ddl.
ondatabinding is passed a standard EventArgs item which doesn't offer much to go on, I can see there is a DataListItemEventArgs class - is this in any way associated with a dropdownlist? I tried directcast on the EventArgs but that didn't work.
So is there any way - within ondatabinding - of finding out the value we're attempting to set on the dll, which causes the ArgumentOutOfRangeException?
I have Detail In Which I USed as Dropdownlist to INsert Item Template and I Am trying to add items to Dropdown using vb.net code using for loop bu when THe Page Runs it adds the values Five times because total rows in detail view are five .Here is My Code
If Me.IsPostBack Then If Page.User.Identity.Name = "gate" Then For Each DetVW As DetailsViewRow In DetailsView1.Rows[code]......
I am creating a page in which I need to show a drop down List. From this drop down List a user can select multiple values. I know I could use a check box list like:
but if there are more than 50 or so values then that will consume a lot of space on the page and will look odd. So kindly tell me how can I select multiple values from drop down list or if there any alternatives so that I can select multiple values and show many records on a minimum space but not a grid?
I have a webForm app that registers a user in the database based on the information provided with a web service, auto-generates a random password and username, and e-mails the user a link to take an application based on the marketing company selected. How do I get only the currently logged in user's groups to show up under the MarketingCo_DropDownList. Each user allowed access to the system will have membership in at least one of the marketing groups as defined by the web.config. For example, a user that is currently logged in and belongs to the BIG group under location "algACOMP_user_BIG", will only be able to see BIG in the Marketing Company drop down list. A user that is currently logged in and belongs to the NIS group located under "algACOMP_user_NIS" will only be able to see NIS in the Marketing Company drop down list.
Here's my best guess (located under Private Sub GetMarketingCompanies() method in default.aspx.vb): If InStr(WindowsIdentity.GetCurrent().Groups = "AMG", item.MarketingCompanyShort = "AMG", CompareMethod.Text) Then marketingCo.Items.Add(String.Format("{0} | {1}", item.MarketingCompanyShort, item.MarketingCompanyName)) For Each item In ac1 [Code] .....
In my project when someone logs in I refresh the overhead and side menus. My overhead menu is an extended menustrip component that I have made. I am able to clear the menu, reload it dynamically but I am not able to add/insert the open windows which are managed by the mdiwindowlistitem property. These are the items named "1 - form name " "2 - form name" etc.
I have been able to copy the whole dropdown list, and with some very hacky loop work I can take out everything but the items related to the forms. But when I add them back in, they are not on my list. The related forms are still open and if you click the maximize button to shrink a open child window, and then re-maximize that same window...the items magically show up in the list.
This ManageMenus sub is called during a login change. If you breakpoint on "openwindowslist" after it is returned with data, it has the proper entries and nothing extra. It just seems that the for/each add loop does not actually add the items. Or, if it does add them, I can't see them.
Tried both insert and add functions, same results both ways.
CODE:
In my xmlMenuStrip component this is the function that removes everything but what follows the seperator. It returns them in a list.
In ASP.NET MVC, is it possible to fill the list of values of a Html.DropDownList from multiple data sources along with multiple manually entered values?Basically, I envision it being formated like the below using something along the lines of OPTGROUP:
I've thought about using a view on the DB and getting the data from that, however, I've not really the faintest how to lay it out like above using helpers and to pass the data to it from multiple sources.