I have a page with a CompareValidator on it:
[Code]...
My first thought was something odd with the date format, but we're using UK dates, last error was on 18th July, so the ValueToCompare gets set to 18/07/2011. I've set this manually using the debugger, and it worked fine.
I have a system that gathers raw data from electronic devices, uses that data to populate a set of tables and allow uses to add/edit certain data and report on it. (Kind of basic right...NOT) There are 3 applications that I've written that use the same database.
One is a client that is on 3-4 user machines which allows them to see the data that has come in and work with it.
Two a Data-to-Information process program which takes the raw data, checks up certain information and puts the results into the database.
Third is a data gathering app that interfaces directly with the electronic devices and about 10 times per day places the raw data into a single table in the database.
If a user is in the 'client' application the data processing application crashes all over the place:
1. Database file already in use.
2. Unrecognised Database format
3. File locked exclusively by User on PC X.
Almost always on a different line of code and once when I made it retry over and over I managed to corrupt the database and had to Compact and Repair it to fix it. If no one is using the client everything works perfectly. On each client machine is a database with linked tables to the server machine. The machine that is running the Data processing is the server and the processing is using a database in a different folder that also has linked tables.
I have gone through all the recordsets in the Data Processing application and made sure that they are only using ForwardOnly and Read Only. They edit the data only with Insert, Update or Delete queries. I'm about to do the same in the Client Application as it seems to be the one that is locking everything all the time. The client machines haven't crashed on that error at all. Does it matter which version of Access is on the client and server machines? (All the clients have Access 2003 and the server has 2007 but the Database was created in 2003). Should I just convert the Access database to SQL server and be done with it?
We are running Crystal Reports on a Windows Server 2008 with .NET framework 3.5 SP1. I have seen many causes of the general error "The request could not be submitted for background processing." on other forums, however they tend to be persistent and repeatable affecting just a single report due to a specific formatting issue with a specific report.We are seeing this error with the below stack trace, intermittently. It affects multiple different reports we have. It affects one particular report more frequently than other reports. Once a report is affected the same error will often appear in multiple reports at approximately the same time eg. for the next 10 minutes.The same report run with the same parameters may work when run again (soon after) or the application may need restarting before the report can be successfully re run. These reports all worked previously without issue. No change in server or code seems apparent which would have precipitated this error. All code behind for this is VB.NET We have had difficulty reproducing it in test environments and upgrading to the latest version of Crystal has not helped at all.
[code]...
I have a textbox and a submit button. The textbox is a date-entry field. Attached to it, I have a compare validator with the type set to "date". It does validate and show an error message.
Problem is, the user can still click on the submit button. I'd like to prevent that. If the user has entered something like 03/hello/2011, he or she should not be able to submit the form.
My compare validator is firing always even if it is greater and even if it is less.
<tr>
<td>
Selection Start Date:
</td>
<td>
<asp:TextBox ID="SelectionStartDateTextBox" runat="server"
[Code]...
I'm having a few problems converting some code into VB.NET from C#. Most of the translating is done, but I am getting errors when I try to run my code, and I can't figure out what is causing them. Here is the Sub I translated.
Public Sub CreateWidget()
Dim blue As LCDColor
blue.Red = 0
blue.Green = 0
[code]....
The error I receive on this line ("vision.Widgets.CreateWidget(wg1)") reads "In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user."
start with I was given a program by a friend that was created in Excel 2003 with the help of Visual Basic Editor. He said he used Visual Basic 2003, which he is not 100% sure about. Anyways he used CurLine in the program and when I try to open it in Excel 2007 and then open the Visual Basic Editor and run the program I get the following error:Run-time error '-2147418113 (8000ffff)':Could not get the CurLine property. Unexpected call to method or property access.
View 2 RepliesI am seeing a strange intermittent connection failure. My application works just fine and then starts throwing connection failure exceptions. A reset of IIS is required before the app will start working again.I've been able to trace a few of the failures back to an unexpected restart of the oracle cluster but not all of them. Has anyone else seen this problem? I've searched the web but haven't found anything.
Client - Win2003 server, IIS running ASP.net 2.0.50727, code is VB.NET, ODBC connection via Oracle Client 10.2.0.1.0 Server - Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production on a Linux cluster.
[Code]...
got an ErrorProperty access must assign to the property or use its value.Here i attach the code which have an error.In this program i tried to add data into form . I also create button , textbox. i am using visual studio 2005 and sql 2005. i also have attach the imagece
Private Sub btnregister_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnregister.Click
admin1.LoginDataSet.staff(Me.NAMETextBox.Text, Me.TELEPHONEMaskedTextBox.Text,
[code].....
i have just started learning vb and am enjoying it but am having problems. i want to design a three-way dictionary that allows a user to type in a word (English, Kazakh, or Russian) and have that word translated into the other two languages. The user can also add his/her own words and translations to the dictionary.My dictionary is called: "dictionarykre" and is formatted as follows: engword=kazword=rusword. i am reading the dictionary line by line and parsing it with "=", then putting the words into arrays.i keep getting the following error intermittently: IndexOutofRangeException was unhandled. Index was outside the bounds of the array. The error throws on the "KazListBox.Items.Add(arraytextfile(1))" line.i change the dictionary and the program will work for awhile, then the error will occur again.
[code]...
Well in my vb project it has started giving me a really weird error underlining all my msgbox codes for some reason
this is the error Error 83 Property access must assign to the property or use its value. C:UsersAidanDocumentsVisual Studio 2008ProjectsXeX 360 ModzZ B0XXeX 360 ModzZ B0XForm1.vb 56 17 XeX 360 ModzZ B0X
I have a property in a class as below:
Public MustInherit Class AddOn
Public Delegate Sub UpdateProgress(ByVal fractionComplete As Double)
Private privateProgressUpdate As UpdateProgress
Public Property ProgressUpdate() As UpdateProgress
[code]....
I am getting the error that "Property access must assign to the property or use its value" in the above code.
I'm testing my Visual Basic .net application by running it in Visual Studio express.Sometimes it runs OK, but other times I get an exception (details below, if useful). I'm not sure why I get the exception as the particular part of the application that I am testing re-uses code that works OK for other features.
What should I check, what would give me a hint as to the root cause. Things I tried so far are: Rewriting some of the code to be more robust. The outcome of this was that this approach was getting out of control - I was correcting everything. I made changes such asing alternative libraries (e.g. replacing CInt with convertTo etc). Some lazy declarations, but it occurred to me that there was no problem with these with the code before my changes. And every change I seemed to solve uncovered yet another problem, another different exception So I thought something must be fundamentally wrong with my installation, and a search found discussion group posts from people experiencing something similar. The suggested remedy would be to re-install the .net framework. So I did that and the problems still occured.
Any thoughts on approach to get to the root of the problem? I'm not asking for a solution but some fresh ideas would be very welcome.
[Code]...
i have a very regular problem with MS Access showing random results when being written to from Visual Studio 2008. It happens on all computers including the development machine, using Vista or XP, VS 2005 or VS 2008.Is there a VB.Net flush command I can use before reading the data ?.I write data to a table and then immediately go to read that data.I can make it work if I wait up to 3 seconds before I read the data after a write, using a sleep command. Unfortunately 3 seconds is way too long.Are there any known problems with writing data to MSAccess 2003 from .Net, using VS 2008, VB.Another weird thing that happens is that only half the data is there if I write to an Access table and then go to read it immediately. Sometimes the data's there, sometimes not, with the exact same code and data.
Sometimes the whole table fills with the data from the first record.This is happening throughout my code. Anywhere there's data being written to Access there's a problem if I go to read it immediately after.Sometimes the Access table is blank, even though data has been written to it, and then on a second run of the exact same code it comes good, or gets half the data or every record is a duplicate of the first record. The code is good, so it's not a coding problem, and I can run the exact same code and get good results. So it's definitely an intermittent problem.I run all my access writes through the same code. The part of the code that writes the data is "command1.ExecuteNonQuery()". Whether I read the data from a datatable or as a merged word document, I still get the same problems. So I'm guessing that there's a problem
[Code]...
I have an ASP application with Sql Server 2000 database. The application has a login page. It was working fine. But from past few days, some times login fails and some time it works. I looked into the procedure and ASP page but could not find any issue.
View 2 RepliesI have a class classed class1.vb, it has a public property named prop1 with a get and a set clause. I add one to the value passed in the set clause and in the get clause return the value variable as determined in the set clause. However, I get an error on the variable in the get clause...
Public Property prop1()
Get
Return value
[Code].....
i added an image in my vb project and deleted it... the image was loaded in a picture box on a panel.
now i'm trying to rename the panel2 to something else..... but this error occurs
Quote: Code generation for property 'Items' failed. Error was: 'Could not find file 'C:UsersUserdocumentsvisual studio 2010ProjectsEmail InfoEmail InfoResourcesIcon1.ico'.'
the Icon1.ico is the image i added and deleted.
how could i trap the error during i'm closing the form.. it's always give me "Cannot bind property" when closing.The program has a databound combobox, datagridview..how could i trap those error..
View 1 Replieshow can i solve this error in my code i have access database and i need to connect to it and that was done but when i was trying to add new record it gives me the below error Error 1 Property 'Item' is 'ReadOnly'.
cn.Open("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=data.mdb;")
rs.Open("sec", cn, ADODB.CursorTypeEnum.adOpenDynamic, ADODB.LockTypeEnum.adLockOptimistic)
[Code]....
I am really getting out of control with this small problem and unable to rectify it?Here is my code:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim installed_fonts As New InstalledFontCollection
[code].....
I get the Error Property 'Chars' is 'ReadOnly'
View 3 RepliesA VB5 program I wrote years ago stopped working and is now giving me this error:
Run-time error '380':Invalid property value
I cannot figure out what has changed, since I run that program almost daily. It was working fine, then stopped (without any changes to the program). I suspect I may have uninstalled something it uses, but cannot figure out what.When I open the VB5 IDE, I get an error saying:
'c:program filesdevstudiovbComct232.ocx' could not be loaded--Continue Loading Project?
If I say no, it does not load and I cannot see the source code.If I say yes, it does load and I can see the source code but I get weird compiler errors.
When I right click on the ToolBox and click on Choose Items Error while loading property page comes up, and my toolbox is disabled, Also in the output this text appears:The Windows Forms Designer Package ({7494682B-37A0-11D2-A273-00C04F8EF4FF}) did not load because of previous errors. For assistance, contact the package vendor. To attempt to load this package again, type 'VBExpress /resetskippkgs' at the command prompt.
View 10 RepliesI'm having some very weird issues with interfaces right now.
I have a very simple setup. In one of my class, I have a Property implementing a Property from an Interface.
In my class it's like:
Private _oForm As IForm
Public Property Form As IForm Implements IContainer.Form
Set(value As IForm)
[Code]...
I have like dozens of interfaces like this working throughout my project and I can't believe this simple one can't work!
I have this simple code,
Protected Sub grdSearch_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles grdSearch.SelectedIndexChanged
TimeOff.Where = "UserName=""" & grdSearch.SelectedValue & """"
End Sub
Doing so causes this error, 'UserName' could not be resolved in the current scope or context. Make sure that all referenced variables are in scope, that required schemas are loaded, and that namespaces are referenced correctly. Near simple identifier, line 6, column 1.
The datasource works fine before the where property is set.Update: I found the issue but I still don't get it.Adding it. in the where clause solves the issue. Like this,
TimeOff.Where = "it.UserName=""" & grdSearch.SelectedValue & """"
This is a portion of code. It creates a table of 6 rows with 3 columns on the word document. But I keep getting an error "Range is not a by reference property." However, the table is being added to the word document. I researched the error here & other sites, but not sure how to fix this. VB.Net is still pretty new to me.
[Code]...
I tried to build my project but it has 1 build error
:Property 'Keycode' is non-nullable.
I double click it but it points nowhere. I'm really desperate. My project consists of Crystal Report. It had just been upgraded from version 8.5 to version 11. Is it possible that this is the source of error?
i have two forms. first one is main form, and 2nd is product form. there's a button in the main form which, when clicked, product form should appear. the code is as follows
productForm.Show()
Me.hide()
then this error come:
" Cannot Bind to the property or column product_name on the DataSource. Parameter name: dataMember "
I've got this code and it opens the database connection in debugging (and i've used the wrong password to test that it fails) but when i come to ExecuteNonQuery I get this error
ExecuteNonQuery: Connection property has not been initialized.Here is my code.VB.NET
Public ConnectionString As String = "Data Source=JOHN-PCSQLEXPRESS;Initial Catalog=RLNZ_11;User Id=App;Password=Password;"Dim connection As New SqlClient.SqlConnection(ConnectionString)connection.Open()
Dim command As New SqlClient.SqlCommand("INSERT INTO news (ID, NewsID, NewsTitle) Values (@ID, @NewsID, @NewsTitle)")command.Parameters.AddWithValue("@ID", "")command.Parameters.AddWithValue("@NewsID", NewsID)
command.Parameters.AddWithValue("@NewsTitle", NewsTitle)command.ExecuteNonQuery()
this code is in the button click , i get each data out using spiltbut i encounter error at "cmd.CommandType = CommandType.Text"
Dim conn As New SqlConnection(GetConnectionString())
Dim sb As New StringBuilder(String.Empty)
Dim splitItems As String() = Nothing
[code].....
