I want to loop through my datatable column called SDESCR and created a string that looks like this.
Dim labels As String() = {"North", "South", "East", "West", "Up", "Down"}
this is what i am trying and it is not working
Dim labels As String()
For Each row As DataRow In tablegraph.Rows
labels = labels " ' " + row.Item("SDESCR") + " ',"
Next row
im trying to select some rows based on a criteria, i was wondering is it faster if i create a dataview (based on the criteria) and then loop through the view? or should i loop through the entire datatable and check the criteria manually.
View 5 RepliesI have a datatable with three columns
Id name value value1
I want to create a string from this datatable so that each row in datatable will create two rows name will become one row value 1 will become another row
If name and value1 are similar then include value 1 only otherwise include both name and value1 (this is done)
If name of one row is similar to name in any other row, then add following text infront of both duplicate rows in string
Id is similar to Id
This is what I have written so far:
Public Function GetGazetteer(dataTable As DataTable) As String
Dim processedData = New List(Of String)
Dim rowData = String.Empty[code]....
Is it possible to create a loop using a string I am writing a program and I need it to output 3 letters ahead of the letter you input for instance if you input a then it outputs d and if you input u it outputs x, and also the same with capital letters A then D U then X and so on. I have writted the program the only problem is that when I input X I want it to output A but it outputs [ instead I need to create a loop where when I input X it starts the alphabet over again, and I need to know if it possible and if so how will I go about doing so.
View 5 RepliesI have a string where I have created a template so to speak.
{
Dim myvariable as string
Richtextbox1.text = Richtextbox1.text & "The dog jumped over the" & myvariable & "to find the fox."
}
I have a list box that contains a list of options that loads into the variable example: fence, bucket, etc.
So the sentences would read like
The dog jumped over the fence to find the fox The dog jumped over the bucket to find the fox
Right now I have it coded to display into a rich text box but everything is in the same rich text box.
I'm trying to load the string into an array at the end of each loop this way I can then have each sentence separated.
I am trying to display value of the field ("UserID") for every row exists in datatable to checkboxlist(make the checkboxlist item selected).
I used for loop, but only the field value from last row of RoleUsers table is selected in the checkboxlist.
Here is my code
Private Sub DisplayRoleUser()
Dim conn As SqlConnection
Dim cmd As SqlCommand
[Code].....
Just curious is there a "next row" method when looping through a datatable? Basically, I want to be able to go to the next row without having to go to the end of the loop. See my coded example:
[Code]...
So I made a simple patform game where the player has to jump quickly while the platforms move to the bottom of the screen, as to not touch the bottom of the screen. But, I need to know how to create a loop to loop the locations of the platform. This means that after twenty or so platforms, the same platforms come up again, so that the player will have an "endless" game. I've declared all the platform's locations relative to the location of the first repeating platform:
[Code]...
I am using a SQL query to fill a datatable from 2 associated tables. The first table has Products and the second has associated addonpackages. When I loop through my Products I am able to get all of the addonpackages for the first product but after that the datatable is only getting populated with the last addonpackage for each product. ie:
product 1 - all 6 packages are added tp the datatable
product 2 - only package 6 is added to the datatable
product 3 - only package 6 is added to the datatable
...and so on
My query follows. Why I am getting all of the info for the first product but just the last item for all others. No matter which product I would query first, I get all of the associated data with it but only the last for all others.
SELECT Products.ProductNumber, Products.Name, Products.Mnemonic, AddOnPackages.PackageNumber,
AddOnPackages.Name AS PackName, AddOnPackages.Mnemonic AS PackMnem
FROM AddOnPackages RIGHT OUTER JOIN
Products ON AddOnPackages.ProductNumber = Products.ProductNumber
WHERE (Products.Name = @ProdName)
ORDER BY Products.ProductNumber, AddOnPackages.PackageNumber
IDE : VS 2008,Platform : .NET 3.5,Here is my DataTable columns :ID Note DetailI want to write sth like this :
View 8 RepliesI'm trying to set the same value for all rows for a single column in a datatable without using for loop. Any faster methods to achieve the same.
View 2 Repliesi want to read table row by row i have table with two columns but i want to read the first column only row by row her's my code
Dim col As String = "SELECT users.user1,users.valueid FROM users"
Dim cmd As New OleDbDataAdapter(col, CON)
Dim ds As New DataSet
[Code].....
I have an Access Database "WPS" with a datasheet "CompartmentDescription" having "CompartmentName" as one of the columns. I want to use each element of the column. How do we retrieve the data Using "For Each" loop.
View 1 RepliesI have created a gridview to allow users to type two fields in each row after that I added the user data into a DataTable now I want to insert this DataTable content into the database where each row will have 1 uniqe Id in the database without using loop.If it is not possible without a loop please show me how to do this with the loop Again I already have the DataTable filled up and it is ready to be inserted into the database?
View 2 RepliesI am trying to loop through a datatable, that will pass information to my stored procedure but it isn't working.even though it works when i manuelly
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim dv As New DataView
[code]......
Here is my DataTable columns :
ID Note Detail
I want to write sth like this :
//below code block is not the right syntaxFor each q in dtDataTable.Column("Detail)
strDetail = Row of Column Detail
Next
I have a program in where I need to loop though the entire dataset.datatable. I takes a long time. What is the alternative I can use to do the some job but faster?
View 4 RepliesI just discovered the DataTable.Select-function, and boy I'm glad I found it! It makes my code run several times faster. But, I don't quite understand why it's so much faster than my previous code. In my first code, I looped trough my DataTable to find the specific row, like this:
[Code]...
Is it possible to transfer all row data stored in datatable to arraylist without using a loop ?
View 12 RepliesI have a data table that has thousands of entries. The table has employee production information: YearMonth, Employee ID, Pages worked and Jobtypes (e,k,o and r). I need to calculate a sum of each jobtype and a sum of pages worked for each jobtype, for each individual employee. I am pulling this data from an Access database and so unfortunately I am unable to use LINQ.[code]...
View 4 RepliesI'm pulling data from my DB, adding it to a DataTable and binding that DataTable to my DataGridView. Before I bind the data, I need to change/remove some data. When I loop through the rows and use a Select Case, just for this column, it doesn't work. But if I use an If, it works fine. [Code] In the example above, the "Pass_Flag" row works just fine, but the "FailureCD" does not. But after the Select, with the If statement, it works. In the example, I'm casting the row as a string first and then an integer. I tried casting to an integer in the select case and it doesn't work either.
View 4 RepliesI have a function that searches AD for members of various groups. If I remove the loop, I don't get the error "A column named 'cn' already belongs to this datatable", however, I need to iterate through each OU.
Function getCOMDLNames(ByVal searchStr As String) As DataTable
Dim MySearchRoot As DirectoryEntry = New DirectoryEntry("path", "usr", "pwd")
Dim MyDirectorySearcher As New DirectorySearcher(MySearchRoot)
[code].....
I have created a datatable and now i need to print it,so i did the following:
Private Sub PrintDocument1_PrintPage(ByVal sender As Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage
Dim xPos As Single = 20
[CODE]...
The code works fine.But in the above code as you can see that i am printing the each rows content of the datatable one by one and after printing all the contents of a single row i am looping the code again for printing each and every row present in the datatable. So i want to know that inspite of printing each and every data present in the row of the datatable,is it possible to print the entire datarow at a time and then loop through all the rows present in the datatable?
I have a somewhat unique problem that I have looked for an answer to and continually hit brick walls. The problem is this. I'm using vb.net to read a byte array from memory which total 32768 in length, which is converted to a string. The memory is the active console chunk in the game Call of Duty 4.
[Code]...
Dim count As Integer
For count = 1 To 10 Step 1
Dim But+count As New Button
myButton+count.Width = 100*count
[code]....
Dim But+count As New Button => How to make it work
I am trying to create a datatable in VB.NET, but when I output a row from this table it shows: "System.Data.DataRow".I have compared my code to several websites and it seems correct. However if I instead Response.Write these values they display correctly.
[Code]...
So I'm sure this sample code exists somewhere, but at this point I just need some guidance. What I am trying to do is import all of the data from a CSV I have (it's about 100 columns of data that are numbers, not strings, and have headers) and create a DataTable so that I can plot to a 3rd party chart control called Zedgraph. The problem is that when I plot columns from the DataTable that is created by the following code, it simply plots a diagonal line of the points count (in other words, if I create a curve from a column containing 400 data points, it plots a line from 0,0 to 400,400, instead of plotting the actual data). What I think I have finally figured out is that I'm importing the data as String, rather than Double or whatever other number type I could use. The problem is that I cannot seem to get any OLEDB connection to actually fill my dataset, so I have had to stick with this code for now. FYI, I am using Visual Basic Express 2010 and the file is a CSV created from Excel 2007. [code]...
View 2 RepliesI want to loop through all the controls on a "panel" and bind them to a datatable. I'm finding it hard to detect the "end of the panel" - as I also have group boxes and such on the panel. At first I was using the "parent" control - but that doesn't work with group boxes.
[Code]...
I want to make 2 planning forms, one for persons and one for materials. The most ideal situation is when it can be in 1 form and switched by using an option field at the top.
- The information is coming from a SQL 2008 database.
- Vertical the persons or materials must be shown(dependent of the option field).
- Horizontal every day of the year must be shown, so the number of columns will be 365.
- At the crossing the number of hours must be shown.
- The form must be build as fast as possible.
I tried to create a datatable dynamicly and use a Datagridview. The advantage is the information, which must be shown, can easily be changed. The disadvantage is it is slow.What is the best method to do this in VB2008?
Scenario is this; I've a sqldatareader query that seems to be returning nothing when I try to convert the sqldatareader to a datatable using datatable.load.So I debug into it, I grab the verbose SQL query before it goes into the sqldatareader, just to make sure it's formatted correctly. I copy and paste this into SQL server to run it and see if it returns anything. It does, one row.I go back to visual studio and let the program continue, I create a datatable and try to load the sqldatareader but it just returns an empty reader. I'm baffled as to what's going on. [code] Ok I've done a loop to count the rows of the datareader before using the datatable.load method. In my test query I'm getting 4 rows (the correct amount) in the datareader, as soon as I use the datatable.load method it says the datatable is empty, what's going on?! So it seems a datareader is a one-way thing, iterate through it to get the row count and it's essentially empty as far as any other bit of code is concerned. Didn't realise it was forward only and wouldn't 'reset' once read through.
View 1 Replies