I have bound a datapager control to a listview.
I would like to scroll to the first item of the listview control on the DataPager click. I guess by using javascript, but it seems that the datapager does not allow that...
So what option do i have? How can i scroll, onto a specific anchor, when clicking on the DataPager?
I have a tab control with two tab pages. One page has the auto scroll enabled since there is to much content in the page. The middle mouse wheel doesn't scroll the scroll bar; I have to actually click and hold the scroll bar and drag it down to scroll. Is there a property to allow this?
View 2 RepliesI am having an odd problem with the Horizontal Scroll Control in my program.I am using it to scroll a series of panels across a form.This is my code:
Private
Sub scrHoriz_Scroll(ByVal
sender As[code]....
The problem is that this works perfectly if I use the left and right arrows and it also works perfectly if I use the scroll bar's slider SLOWLY. If I scroll using the slider and move it quickly then the scroll gets out of sync.The small change and large change are both set to 1 and maximum is set to 8
I have a DataGridView with a panel above it, that contains a group of textboxes above each column. My DataGridView has a horizontal scroll bar. What I want to do is when the DataGridView scrolls horizontally, scroll the panel with textboxes above it, so they stay aligned.I tried handling the DataGridView's scroll event, but I'm not sure what to do with it.
View 1 RepliesI am loading several command buttons into it (one in each grid box). I have the panel set to autoscroll. When TableLayoutPanel is set to AddColumns, all works well. However, I dont want horizontal scroll, I want vertical. When I set TableLayoutPanel to AddRows, a vertical scrollbar will not appear.
View 4 RepliesHow would I leave the vertical scroll position as it is and set the horizontal scroll position all the way left if it isn't already in that position? I've been using Me.AutoScrollPosition and have come up with code that is satisfactory but I haven't been able to always leave the vertical scroll position exactly as it is and just move the horizontal scroll position to the left limit.
View 4 RepliesI have a textbox that shows events on a program, which I add. I use the 'scroll bar' option on the textbox to show the vertical scroll bar, but how do I make it stay at the bottom most possible? I am using this code while I am trying to learn how to do what I want the scroll bar to:[code]But how do I get it so the scroll bar will stay at the bottom-most it can? I'd like the newest, most recent events to appear at the bottom of the textbox, and to have the user not have to scroll down every time something new is added.
View 2 Repliesi have 2 controls on a form. Panel1 and picturebox. I am using the following code to zoom in.
PicBox.Width = PicBox.Width + 100
PicBox.Height = PicBox.Height + 75
'PicBox.Left = PicBox.Left - 50
'PicBox1st.Top = PicBox.Top - 20
i am also using the following code to try and scroll whilst zoomed in
Inherits System.Windows.Forms.Form
Private m_PanStartPoint As New Point
Private Sub picbox_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles PicBox.MouseDown
'Capture the initial point
[code]....
I have set the panel to autoscroll and added scroll bars but they do not scroll far enough... They only scroll about 2cm.
Following default the datagridview will scroll following vertical. How can i do that. I tried :
DataGridView1.ScrollBars = ScrollBars.Horizontal but not work
I have a regular html anchor link that is bound to an Id column. I want to loop through the repeater and get the value of the Id column, but can't figure out how. I have some code below my repeater markup. I can't figure out how to do it with just a client side anchor tag.
<asp:Repeater ID="repSearchResults" runat="server">
<ItemTemplate>
<tr>
[Code].....
I have a page with a URL that includes a hash value (www.mysite.com/#123).What I want to do is use that value to determine what is displayed on the page - much like using a querystring.I am using the hash value because the content on the page can be changed client side (I am avoiding page reloads where possible) - if the user then links to another page and uses the back button to return, I need to use the hash value to display the page as it was when they left it.So I'm looking for an if statement that will look something like this:
[code]...
It is possible to anchor 1 control with other control instead of container. I mean suppose i want to maintain fix distance between 2 controls during resizing form.
View 1 RepliesI am trying to Anchor a Form (Top, Bottom, Left & Right) in a panel.
I have tried:
frmFnct.Anchor = AnchorStyles.Top Or AnchorStyles.Left Or AnchorStyles.Bottom Or AnchorStyles.Right
This doesn't error but as the parent Form is re-sized, the panel re-sizes but the Form that is loaded in the Panel does not re-size.
I guess I can use the Parent Forms Resize Event and size the form to the panel dimensions but just wondering if there is a way to use built in functionality?
I have a label that I put a hyperlink into with the function:
[Code]...
I want to gain access to the the string title + "/" + cost + "/" + asin in order to split it with String.Split("/"). I'm getting an error when I just try Dim fields As String() = Label1.Text.Split("/"). What function should I use to get just the text that is between the <a> tags?
using System;
namespace WebApplication1
{
public partial class _Default : System.Web.UI.Page
{
[code]....
I have the above code sniplet. I am trying to bind the anchor within the literal to a function in a following manner:
onserverclick = "Download"
But the event is not firing. The requirement is that anchor is rendered through literal only.
In my form i have a button and a richtextbox .That button resize the richtextbox but my problem is that I can't set many anchors like ( left and right and bottom and top ) for the richtextbox .
View 3 RepliesI created a basic winform project where I want to handle all resizing without writing a single line of code. I set up controls using dock/anchor. They all work properly, until I add a custom UserControl. When I first press F5, the project works fine. However when I get back to the IDE some (but not all) controls which have anchor right/bottom are resized/moved into positions and sizes not previously defined. Some cannot even be restored as they are moved permanently below the container's boundary with coordinates above 2000. If I fiddle around and test the project many times, all controls with right/bottom anchoring will go haywire eventually.
If the custom UserControl has controls inside with right/bottom anchoring those also get resized in weird ways. Adding the controls again solves the problem temporarily. It is the IDE that moves these controls around since these movements are displayed in the undo stack right after I exit testing the project (however,undoing these steps only messes things up even more).I am using VB 2010 on Windows 7 x64.
I am developing a site that has some hyperlinks stored within the database. I have moved some pages around so I need to implement redirects and replace URL's displayed on a page with the new paths.I am trying to do this for a Repeater control using the following code.[code]However this code does not execute and the Contains section is not returning true. Can anyone explain to me where I am going wrong and what I should be doing differently?
View 6 RepliesHas any one experienced this. Never seen it before. Anchoring a Toolstrip Left,Top,Right will resize the strip with out the option of stepping back and undoing it. Forces rolling back the application. Toolstrip is docked at the bottom.
View 2 Replies1) I want anchor the form to the border of the screen, in this way :
2) and if i change the video resolution (for example from 800x600 to 1024x768) i want that it will be automatically resized
I've tried every method in the book and can't seem to get a solution for this. I need to be able to click on a text link using VB.Net (2008+). The link itself is as following[code]...
Notice that it uses #, so I can't go by the href (I've already considered that) ... not to mention there are THOUSANDS of other links like that. How can I click it by the specific 'AnchorText' that is there? I wish it was as simple as WebBrowser2.document.GetElementById("IdHere").InvokeMember("click")
I wish that visual studio 2010 would have more support for rtl. this support would be in two places: include an option for visual cursor movement like in MS Word. when switching a form to rtl the anchor points and the alignments are all reversed. Thy should be logical meaning when I anchor a text box to the right it should anchor to the right and not the left. will these are my only two wishes for now.
View 1 Replies[URL]..I cannot seem to get a regular panel control to anchor Left/Top/Right while place in a FlowLayoutPanel which is docked to a Form. It defaults to a Left/Top position and I cannot seem to get it to anchor to the Right as well either by code or by manual input in the Properties window.
Does this imply that there is an issue with my VS Studio 2008 Express?
How can I set the Anchor property of controls in code?
View 8 RepliesI want the following different input types to be converted into the following anchor tag:
Replaced with:
<a href='http(s)://www.stackoverflow.com' title='Link opens in new window' target='_blank'>www.stackoverflow.com</a>
[code].....
I have a question about the webbroswer control regarding anchor tags. Is it possible to programmactically in vb.net go to an anchor tag in a webbrowser control? I would like to ideally provide a combo box drop down on the winform form and control which part of the html page the user goes to when the user makes a selection from the combo box.
View 1 RepliesIm looking to anchor a toolstripcombobox?
View 3 RepliesAnchor point for picture box when moved and resized
View 3 RepliesI have a form with a series of basic objects,, a list box a few buttons, a few text boxes and a few labels..
Anchor property works just fine on all of them except one text box and one label. The property is clearly SET on both objects and I can't, for the love of me, figure out what is making these two act "disobediently".
I have the following code to download a file from a FTP server
Sub DownloadFile_Sap()
Dim remoteuri As String = "http://appsrv01.shakarganj.com.pk:7778/reports/rwservlet?reptest&report=sap_dashboard"
[code].....