using System;
namespace WebApplication1
{
public partial class _Default : System.Web.UI.Page
{
[code]....
I have the above code sniplet. I am trying to bind the anchor within the literal to a function in a following manner:
onserverclick = "Download"
But the event is not firing. The requirement is that anchor is rendered through literal only.
It is possible to anchor 1 control with other control instead of container. I mean suppose i want to maintain fix distance between 2 controls during resizing form.
View 1 RepliesI am coding a dynamic asp.net page in which i want to have text boxes in a page and the number of text boxes depend on a previous user input. Since the number of text boxes are decided dynamically, I am going with designing them in code rather than in the aspx page.Now I need these fields to be mandatory and so want to indicate a RED asterisk symbol in front of the label corresponding to each text box.I am really new to working in .net and I couldn't figure out how to set a specific color to a labelcontrol.[code]....
View 1 RepliesHas any one experienced this. Never seen it before. Anchoring a Toolstrip Left,Top,Right will resize the strip with out the option of stepping back and undoing it. Forces rolling back the application. Toolstrip is docked at the bottom.
View 2 Replies[URL]..I cannot seem to get a regular panel control to anchor Left/Top/Right while place in a FlowLayoutPanel which is docked to a Form. It defaults to a Left/Top position and I cannot seem to get it to anchor to the Right as well either by code or by manual input in the Properties window.
Does this imply that there is an issue with my VS Studio 2008 Express?
I have a question about the webbroswer control regarding anchor tags. Is it possible to programmactically in vb.net go to an anchor tag in a webbrowser control? I would like to ideally provide a combo box drop down on the winform form and control which part of the html page the user goes to when the user makes a selection from the combo box.
View 1 RepliesI want my User Control to be able to have Literal Content inside of it. For Example:
<fc:Text runat="server">Please enter your login information:</fc:Text>
Currently the code for my user control is:
<ParseChildren(True, "Content")> _
Partial Public Class ctrFormText
Inherits UserControl[code]..............
And when I put text inside this control (like above) i get this error: Parser Error Message: Literal content ('Please enter your login information to access CKMS:') is not allowed within a 'System.Collections.ArrayList'.This control could have other content than just the text, so making the Content property an attribute will not solve my problem.I found in some places that I need to implement a ControlBuilder Class, along with another class that implements IParserAccessor.Anyway I just want my default "Content" property to have all types of controls allowed in it, both literal and actual controls.
i have a webserver control in my application.i load the web browser control on a button click using the below code
Private Sub Button1_Click(ByVal sender
As System.Object,
ByVal e As System.EventArgs)
[code]......
Is it possible to anchor a control to another control?Lets say i want my Button1 to keep its 4px distance from Textbox1 control without using FlowLayoutTable control? "Why would be this advantageous?" - one could ask Well lets say you have a SplitContainer with a vertical splitter and you have Textboxes in SplitContainer.Panel1 which are anchored to the left and right but their maximum size's width is smaller than you allow to the SplitContainer.Panel1's width to have (maybe because you want text to show up there or because additional padding or whatever,you name it) Now let's say you also have a button next to Textbox1 and you dont want Textbox1 to be overlapped by the Button1 because its extends to far.If i want to have my textbox fill the SplitContainer.Panel1 in a fashion that it leaves space for Button1 control while still both of them are anchored to the right how would i do it?
View 1 RepliesI am going to be performing an XSLT transformation, transforming XML to an HTML table. It's tabular data, so that's why I'm not using div's.
[Code]...
Possible Duplicate: Multiline strings in VB.NET
How do you specify a multiple line string literal in Visual Basic .NET?
You can do it in C#: Multiline String Literal in C#
How do you type binary literals in VB.NET?
&HFF // literal Hex -- OK
&b11111111 // literal Binary -- how do I do this?
I just learn how to create an array literal in VB.NET. [code]...
View 1 RepliesI have a ListView called "orderReceiptTable" which I am able to properly access from the Code Behind. Within it is a literal called "orgName" which I obviously would like to populate with an organization's name. After much searching it was determined that FindControl was the right course of action. Perhaps I am using FindControl improperly but I am unable to actually have it "find" my Literal control. The code block is being called in the Page Load.
My code looks as such:
Dim orgNameString As String = getOrganizationName.getOrgName(organizationID).ToString()
Dim myOrgName As Literal = FindControl("orgName")
myOrgName = CType(orderReceiptTable.FindControl("orgName"), Literal)
If Not (myOrgName Is Nothing) Then
[Code] .....
If I needed to escape a double quote character within a string literal I'd use two consecutive double quotes as follows:
Dim name = "Chuck ""Iceman"" Liddell"
However, it doesn't seem like consecutive # works the same way. The compiler is expecting a compiler directive to follow the # character, even when its enclosed in double quotes. How can tell the compiler that I want a # character in my string?
EDIT: as a few of the answers below point out, # is not a reserved character. I closed my solution in Visual Studio and re-opened it and no longer got the compiler squiggles warning me.
I have the same problem as stated in this question, but the accepted solution there was a "works on my machine" answer.
[Code]...
And I receive the error: BC30201: Expression expected.
Does anyone have a more detailed idea of what could cause this?
In an older thread i was looking to read data into a temporary datatable, Now I think I have gotten this working, but i am not sure how to connect the temporary data set (if needed) to access the data from this.
Again here is my code
[code]...
I'm getting the error below when I try usign the XmlTextWriter in my VB aspx page
[Code]...
I'm trying to assign the literal text as a URL redirect as follows:
Dim l As Literal = CType(sender, Literal)
l.Text = "<a href =""~default.aspx?tabid=65&itemid=" + id + """>Results</a>".ToString
The problem I'm having is with the ~
Without the squigly (does it have a proper name?) I don't get the full proceeding part of the URL.
With the squigly it displays the URL perfectly but with the squigly still there.
[URL]
This might just be a matter of taste, but I'm wondering if there's a "recommended" way to compare a variable of type Object (which might be Nothing or have a different dynamic type than String) to a string literal in VB.NET. The following options obviously won't work:
If myObject = "Hello World" Then ... -- won't compile
If myObject Is "Hello World" Then ... -- tests for reference equality, which is just wrong
If myObject.Equals("Hello World") Then ... -- throws an exception if myObject is Nothing
If DirectCast(myObject, String) = "Hello World" Then ... -- throws an exception if myObject is not a string
Thus, the only (simple, single-expression) solution I could find is to use
If "Hello World".Equals(myObject) Then ...
which looks a bit clumsy to me. Did I miss any obvious alternative, other than doing type checks or explicit checks for Nothing?(Of course, we're talking about Option Strict On.)
With Option Strict On:
Dim theLetterA As Char = "A"
returns an error about converting the string "A" to a Char.
What is the syntax to enter a Char literal?
how to capture the 'ID' literals from the following xml file example using VS and VB 2010. I plan to assign it to a temp variable for later use.
<?xml version="1.0" encoding="utf-8"?>
<Rows>
<Row Sortorder="1">
[code]....
Isn't there a way in VB to pass an array literal? Say the subroutine ask for an array of integers and you have just one. Can't you do something like
DoSomething({MyNum})
instead of
Dim MyNums as Integer() = {MyNum}
DoSomeThing(MyNums)
I'm thinking I'm just missing some adornment to the array literal inorder pass it.
Public Class Form1
Private
[code].....
I have a regular html anchor link that is bound to an Id column. I want to loop through the repeater and get the value of the Id column, but can't figure out how. I have some code below my repeater markup. I can't figure out how to do it with just a client side anchor tag.
<asp:Repeater ID="repSearchResults" runat="server">
<ItemTemplate>
<tr>
[Code].....
I have bound a datapager control to a listview.
I would like to scroll to the first item of the listview control on the DataPager click. I guess by using javascript, but it seems that the datapager does not allow that...
So what option do i have? How can i scroll, onto a specific anchor, when clicking on the DataPager?
I'm programming in VB.NET using Visual Studio 2008. I need to define a string literal containing the character "÷" equivalent to Chr(247). I understand that internally VS uses UTF-16 encoding, but when the source file is written to disk it contains the single byte value F7 for this character.
This source file is processed by another program that uses UTF-8 encoding by default, so it fails to interpret this character correctly, attempting to combine it with the following single-byte character. What encoding would correctly interpret the single byte F7 as the single character ÷?
Alternatively, is there a way of expressing a non-ASCII literal that uses only ASCII characters - like using some kind of escape sequence?
I would like to add a variable data to a string literal WITHIN the HTML tag[code]....
View 1 RepliesHas anyone ever tied to get a reference to resolve and then concatenate with a literal in an app.config key? I am trying to point to a resource, which in this case is a PDF file, and want to make the path to the resource configurable.[code]What I get is a string with the embedded double quotes I want but the Application.StartupPath reference does not resolve.
View 1 RepliesI have a page with a URL that includes a hash value (www.mysite.com/#123).What I want to do is use that value to determine what is displayed on the page - much like using a querystring.I am using the hash value because the content on the page can be changed client side (I am avoiding page reloads where possible) - if the user then links to another page and uses the back button to return, I need to use the hash value to display the page as it was when they left it.So I'm looking for an if statement that will look something like this:
[code]...