C# - Control.DataBindings.Add Breaks With Period In Data Member Name?
Mar 1, 2011
I am trying to add to a binding using Control.DataBindings.Add(). The issue that I am having is that the data member name has a period and space in it("Foo. Bar"). When I try to add the binding I pass in the string "Foo. Bar" as one of the arguments and I get an exception "CAnnot find datamember "Foo.".Is there a syntax that I need to use to pass the datamember name in when it has a period in it? I tried adding "[]" around the name but no dice.
I started using MSScript Control a while ago, and it was working fine. Then I started a new project, and it breaks my whole form... I copied the exact code from my other project where the code works.
Imports System.Threading Public Class Form1 Public TEngine As MSScriptControl.ScriptControl Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
I am sharing databinding when opening a detail form a summary form. The data is shared fine. What I don't know is how to save any data that may have changed, or to create a new record.[code]...
I'm beating my head against the desk on an advanced level solution in the VB 2010 book, and can't figure out what I am doing wrong. This is the exercise: JM Sales employs 8 salespeople. The sales manager wants an application that allows him to enter a bonus rate. The application should use the rate, along with the 8 salespeople, in an array, to calculate each salesperson's bonus amount. The application should display each salesperson's number (1 through 8) and bonus amount. as well as the total bonus paid, in the interface.
1. The txtRate control should accept only numbers, the period, and the Backscape key.
2. A one-dimensional array should be used that has elements initialized to the following sales amounts: 2400, 1500, 1600, 2790, 1000, 6300, 1300 and 2700.
I have the interface created and its error free (for now) but its not doing what its supposed to do. It's supposed to show something like this. I can provide screenshots if necessary. [code] but what I get is a list of 0.00's in all of the above fields. What am I doing wrong? Heres the code finally, sorry if I was overly descriptive. This is my first time doing one of the advanced exercises, maybe I should go back to intermediate.
In the following code i get a warning at line 59:Warning 1: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated.and.. At line 78 I get this Warning:
Warning 2 Property 'SelectedCustomer' doesn't return a value on all code paths. A null reference exception could occur at run time when the result is used.
The program compiles and runs well, but i cant' undesrtand the reason for these warnings. Any Idea ?
1: Public Class Form1 2: 3: 'Form level members 4: Private objCustomers As New ArrayList
Cannot appear to be able to get this function to not have the above error.Private Function GetIncidentActions(ByVal FromAgentID As Integer, ByVal ToAgentID As Integer, ByVal incidentAction As Integer, ByVal ActionDate As Date) As String
I'm having a problem at my code. The for each command..Private Sub cmdVoidOrder_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdVoidOrder.Click
I just wanted to confirm couple of things. I) Code snippet: cmb1.Datasource= dt; cmb1.Valuemember = "value"; Does the control rendering happens 2 time for the control, 1 more time extra because of the value member getting changed after data source assigned. Is this so? II) How can I trace these re-populations in C#? I just wanted to debug and see and confirm?
I have several pictureboxes in my form with names as "stop0", "stop1", "stop2" ... upto a the number of checked items in my checklistbox. My aim is to use a for-next function so that the program should use for all these pictureboxes a specific image. here is the code I made so far:
Dim a As String = selectedbutton.Replace(" ", "_") & "_" Dim c As String = "" For n = 0 To chklstStops.CheckedItems.Count
I am trying to read values from textbox controls and combobox controls on a form. Reading the values from textbox controls is working fine but I cannot read from the 3 combo boxes. Here is some simplified code of what I am trying to do.
I'm "cloning" objects in my code. For instance: objClone = objOriginal My question is: Does the assignment operator in VB.NET 1.1 do a member-by-member copy of the objOriginal to objClone or does objClone simply point as a reference to memory referenced by objOriginal?
I have a combobox that is bound to a BindingSource that contains a custom object with multiple Properties.
Is there a way to access a Datamember that is not displayed in the combo box and display it elsewhere. For example, When a user selects a name from the combo box, texboxes (or Labels) populate with Title, PHone, email, etc. All of this data is loaded in the custom object that is bound to the datasource so the info has already been pulled from the db and is in memory.
i changed a class variable to shared so i can access it in all instances of the class, but it caused an error. what is causing this, and how can i fix it?
I'm having some problems with a data bound datagridview.My current scenario is the following..The itemSetup has tree properties {ItemNo, CompNo, LocNo}(compno locno are not required)I have a datagridview with a datasource list of itemSetup And this has two comboxes cboCompany that is bound to a list of company the selected value is bound to compno. cboLocation that is bound to a list of locations the selected value is bound to locno the location class requires the compno to create the list of location the problem I run in o is that the when the compno is Nothing the cboCompany throw a datagridview_ dataerror when the form is loaded en when a item is added it looks like the binding of the combox runs later then the value is set.
(I used to use VB6.) I have been developing a database management program which is quite simple so far, with navigational controls, ability to delete record, datagrid, etc.
It uses databound textboxes, but when I modify the content of them it does not update the database. Same applies when I add a new record and fill in the textboxes.
I'm having trouble using DataBindings in a Windows Form / User Control. For example: Create a windows form, place a single text-box on it & place two buttons on it. The code behind the form is:
Imports System.ComponentModel Public Class Form1 Implements System.ComponentModel.INotifyPropertyChanged Public Event PropertyChanged(ByVal sender As Object, ByVal e As System.ComponentModel.PropertyChangedEventArgs) Implements System.ComponentModel.INotifyPropertyChanged.PropertyChanged [Code] .....
If you type something into the text box & press Button1, you'll get a message box with the text of the property in it. If, however, you press Button2 (which sets the property in code) and then press Button1 again, you'll see that while the property was indeed set in the code, the text box doesn't reflect the change.
Updated the code to provide the implementation of INotifyPropertyChanged. This now works as desired.
I want all binded controls in a form or a user control have the Data Source Update Mode to OnPropertyChanged (by default they are in OnValidation).I can do that for each control in designer mode and in the DataBindings, under Advanced, change the Data Source Update Mode to OnPropertyChanged but I want to do that once for all controls.
All my controls are in a big user control, so I put before InitializeComponent() : Me.DataBindings.DefaultDataSourceUpdateMode = DataSourceUpdateMode.OnPropertyChanged It is not good, my controls are still in OnValidation mode (instead I force the
I have been developing a database management program which is quite simple so far, with navigational controls, ability to delete record, datagrid, etc.
It uses databound textboxes, but when I modify the content of them it does not update the database. Same applies when I add a new record and fill in the textboxes. What do I need to do?
I wanna know a thing.I wanna know how to move into the different regs of the form (using databindings), just focusing the ID textbox and selecting ALT + => to go to right, ALT + <= to go to left, ALT + UPbutton to go to next and ALT + DOWNbutton to go behind.
I have 2 tables Table A & Table B Table A has the table values that I want to be populated in a datagridview control.The challenge is that column 1 in table A contains an ID(foreign key) to a name field that is a located in table B. I need the datagrid to have the first column be a combobox that displays the names(from Table B) that are already in table A via the ID's, but reference the populating values from Table B. So that when you bring down the combobox you would be choosing from Table B data but populating table A with the ID and you would see a name there instead of an ID.[code] How do I populate my DS dataset with Table B? And how can I create a link to these two tables using a bound datagridview control?
I recall being told by a professor the following is bad practice. But it makes stepping through code a lot less tedious. I'm just solicting comments on pros and cons:
Friend Class MyClass Private isEmpty As Boolean Public Property IsEmpty() As Boolean
I have a form with many different textboxes on it. The form is used to Edit the data already in a databound table. At design time I set my Databindings.text to the appropriate columns.
During form load I check the values in the bound column for null values. If the column value is null, I set the textbox.text property to a descriptive prompt like "enter telephone #" or enter city. I also use databinding.remove to remove the databinding so that the desriptive prompts don't wind up in the database.
Here is the code I use to remove the databinding.
For Each Panels In Me.Controls
PBox = TryCast(Panels, Panel)
[CODE]...
.Tag2Defaultphase is a custom property I have defined which holds the default descriptive prompt. If the user enter a value into the textbox I then wish to add the bind back so that when I updateall with the tableadapter the value will be transferred back to the appropriate bound column.
Here is my code for that:
Sub perOptionalTBoxValidation(ByRef TBControl As custTextBoxControl, ByRef strDefaultTextPhrase As String, ByRef intMaxChars As Int32, ByRef bsBindingSource As BindingSource, ByRef strColumnName As String)
I have problems with array of structures.my structures are like this
structure order xxxxxxxxxxx yyyyyyyyyy zzzzzzzzzzz end structure
and then I created many array of structures, like this private arrayorder (100) as order
now i need to sort the entire xxxxxx member of the array of the structure with a function, but I dont want to use loops with arrays indexes to access the information. I want to know if there is another method to reference the array and the member of the structure to get the data.
