I want to get a control's property from a BackgroundWorker in my form:
foreach (ListViewItem i in ListView.CheckedItems) { //error: Cross-thread operation not valid: Control 'ListView' accessed from a thread other than the thread it was created on.
//do something with i
}
On a given application form, I have around 20 controls that I need to set in the main form. I have a separate thread that only needs to ready some properties from the controls on the application form It will never try to write to the form's controls.
[Code]...
I need some help to understand my options to get this working. I try to update a textbox control by a property-changed event from a class variable. I've digged around for a day and have a vague understanding that this can be solved in three ways:
1. Using some "if InvokeRequired", "Invoke" code in the handler method
2. By programming a special delegate class for this variable
3. By using a databinding directly linking the control (textbox) to the class event
Now.. Are these options correct? And would it be possible to get some help to show these three solutions in actual code (relevant to mine)? I can't seem to manage to sort all the information to a working code. Also, what are the pros and cons of the different solutions?
As my code stands now, it's obviously none of the above, as it gives a cross-thread error, as indicated.
[Code]...
In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.
I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes
[Code]...
I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
[Code]...
I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:
'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private
[code]....
My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.
Dim lvi As ListViewItem
For Each lvi In lv1.Items
[code]....
Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
When i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."
View 13 RepliesI need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""
I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?
In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm""
with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.
im getting this error and i cant figure it out.
Public Sub mlogin()
Invoke(chkb, New Object() {"disable"})
Invoke(d, New Object() {achidrtb, "", "="})
Invoke(d, New Object() {hiddenrtb2, "", "="})
[code]....
As we know, one STA UI thread creats the controls only canbe accessed in the UI thread in Winform application. And we need to call control.invoke or begininvoke to run the code in the background thread.
Yes, below code in VB.Net , VS 2010 Winform project can throw the exception "Cross-thread operation not valid: Control 'Form1' accessed from a thread other than the thread it was created on."
[Code]...
My program crashes with the following error:Controls created on one thread cannot be parented to a control on a different thread.Purpose of the program is to add a control from a thread outside the main thread.Below is the code Private Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
I have a VB.NET form created in VS 2008. This form contains an ActiveXControl (MapPoint 2006 Europe ocx) located and reference here:[code]The project compiles just fine. However, when I run this starting form I receive this error:An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'AxMappointControl1' accessed from a thread other than the thread it was created on.[code]I mention that the very same project was upgraded from VS 2005 on which worked just fine.
View 12 RepliesI must change the textbox value of a form a thread that is located on an other module. I've already tried with the CheckForIllegalCrossThreadCalls to False on the onLoad event of the textbox's form but it doesn't seems to work because everytime the thread executes the lines that should change the textbox value nothing happens at all (not even a warning). I really don't want to use that "safe cross threading" with delegates and stuff because it's too much trouble for me, I don't know how to use it and I just have one thread on my project and it's the only control that is accessing those textboxes.
View 2 Repliesto be able to print a list of objects in a user-defined way, i've implemented an IComparer (sortclass), which is able to sort any object by its property. I have a list that can be printed (first a pdf is generated trough the object, then passed to the printer), all done by clicking 1 button (print button).
The internal ICollection (list of) is perfectly sorted, however, the routine to create and print the objects is apparently called to soon... since not all objects are completely sorted when send to the printqueueu. A check of the list after all objects has been send to the printer proves however that the list is printed.
[Code]...
My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...
With that in mind, I tried this:
For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)
[CODE]...
However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).
I would like to be able to set Control visual properties such as color, boarder, flat style, etc. on the base class of the control so that as I add new instances of the control, each instance inherits the visual properties of the base. I have tried using Application Settings but it appears as though I need to reference an application setting manually each time I add the control to a form. This is a Windows Form question.
View 4 RepliesI'm trying to make a program with transparent labels over pictureboxes and when I set the label Parent to the PictureBox the position of the label changes.
View 2 Repliesi frequently have troubles with the dock property. it seems that either the order of creation or adding to the parent control determines whether or not a control's dock property supersedes another's. e.g. a control with the dockstyle fill will overlap with another docked control on the same parent. does anyone know what the rules are to determine how docking will behave; particularly in dynamically created GUIs?
View 2 RepliesIs there a way to bind the text property of a control to an expression? I have a user control that I add to a FlowLayoutPanel. You can see I have 4 controls in the FlowLayoutPanel below. The first control is a LinkLabel and the other three are my user controls which are numbered 1, 2, & 3. I'd like to bind the label that shows the 1, 2, or 3 to the user controls index within the FlowLayoutPanel.
If I happen to remove the 2nd user control I want the 3rd user control to now display 2. I could use the FlowLayoutPanel ControlAdded or ControlRemoved events, but wanted to see if I could do some binding first.
If I need access to the value of a user control's property BEFORE PreRender, would I need to base the custom control off of one of the preexisting data controls (repeater, listview,etc.)?One of my user controls features a gridview control that is configured based on the user control's properties on which it resides. Several of the key properties alter the SQL Statement for the underlying recordsource. I'm now in a situation where the property that sets the WHERE statement for the SQL Statement needs to tied to a value in the user control's parent FormView. Think of the formview as displaying a customer detail record. The user control takes the customer's account number and then displays data from a related table such as Customer Contact Names. Since the gridview is created before the control's prerender event, working within the prerender event doesn't seem efficient.
View 1 RepliesI am developing a parser application to build a call tree from DDL files that have been extracted from a database. The idea is to take a large number of these DDL files and determine exactly what calls what. To do this I am using a .NET TreeView. The final output I am working toward is something like this:
-Proc1
-Proc2
-Proc3
[Code].....