I know that I can select an option in a listbox within my HTMLDocument (which refers to a webbrowser control's HTMLDocument) using SetAttribute. For example:
htDoc.GetElementById("lstCountries").SetAttribute("value", "88")
However, I can't figure out how I can select multiple items within the listbox. When I call SetAttribute repeatedly, it always unselects the old one first.
I have a simple ASPX page with a listbox and a button. Listbox has about 8-10 items in it. After the user selects an item (listbox is multi-select) and clicks the button, I'm iterating through the items to get the selected one like so:
For Each Item As ListItem In lstLetters.Items
If Item.Selected Then
Dim LetterID As String[code]....
When I step through the code, I select the first item from the listbox. I setup a watch on the 'Item' variable. The code will iterate through each of the items -- but Item.Selected always reads 'False'.I double-check the page, and sure enough my item is selected on the form.What the heck is going on?
How do I express, in the code, all the items in the textbox? So far all I could come up with was this:
Dim x
Me.Listbox1.Items.Item(x)
But it isn't working.
Well i this code in a timer: listbox.index += 1 Witch works fine but when it gets to then end of all the number it gives me a error saying no more items to select. So how do i make it so that when it reachs the end of the list it starts over and
back to the top of the list?
Should: take items and fill checked list box with possible tours that the company can receive (this is done and working) i.e. for 2012, Titleist gets X, Y, and Z; so there are two checked listboxes for 2012: lvl 1 and lvl 2, username specific Both have lists "X, Y, Z" in that order, lvl 1 and 2 is for the permissions level, 1 is lvl 1 and 2 is alex's 0 marking for full details code goes through and checks if lvl 1 is marked, if so it checks the tour in the lvl1 check box if zero is marked, finds the tour in lvl 2 and lvl 1 and checks both items if a tour exists for company but not for the user, the checkbox exists but neither is checked
[Code]...
i just need to select from multiple checkboxes, this checkbox contains days from Monday to Saturday. Here is the idea on what will happen if I select Multiple days, it will save on a field on my database with colon(;)
View 6 RepliesI am working on a project for software engineering where we are trying to create a warehouse inventory system. I have created an inventory page where I can add/delete/search for an item as well as access invoices and reorder items... i am struggling on the delete item part. I have my design set up where there are four different lists on my page. One for name, one for serial number, one for RFID number and one for amount in stock. I want to be able to select an item by name and its information in serial number, rfid, and amount also select and have no idea how to go about this..I wanted to use four different lists because I need to be able to delete an item from the list and it remove just one from that stock and not the entire item unless there is only one of that item left in stock.
for my inventory page
Public Class InventoryDepartment
Private Sub InventoryDepartment_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
I am able to only move single items from one listbox to another with this code. I tried with both MultiSimple & MultiExtended SelectionMode.
How do I select multiple items and then move them?
Private Sub cmdAdd_Click(ByVal sender As System.Object,
ByVal e As System.EventArgs
[code]......
(Visual Basic 2010)I'm trying to add multiple item to a listbox from a text file. The program will show help for computer tasks.
Textfile:
Add new event to calender#Sync calender to phone#Print something from the internet
Code:
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
UpdateTopicList()
End Sub
[code]....
I got 3 listboxes.
[Code]...
So basicly I want to loop all items from listbox1 with each item in listbox2.
I am making a virtual crafting application (similar to that done in Minecraft)
currently I have made a test "crafting recipe" which checks if the listbox (mixbox) has 1 window, 1 door and 1 wheel. the code looks like this:
If mixbox.Items.Contains("window") Then
If mixbox.Items.Contains("door") Then
If mixbox.Items.Contains("wheel") Then
[Code]....
I've looked everywhere on the internet for multiple items drag&drop between listboxes and found only examples showing single item drag. I know how to make a single item dragdrop operation between two listboxes using MouseDown, DoDragDrop, DragEnter, DragDrop Now what I'm looking forward to learn is the ability of dragging more than one item from one listbox and dropping them in another listbox
View 2 RepliesI currently have two list boxes that have the exact same items in each. I don't want the user to be able to select the same item from both list boxes.
My code:
listbox1.Items.Add("SSS")
listbox1.Items.Add("AAA")
listbox2.Items.Add("SSS")
listbox2.Items.Add("AAA")
I'd like the user to not be able to select AAA & AAA from different list boxes, just SSS & AAA. I have way more items just thought I'd shorten it.
I want to delete Multiple rows of listbox, I tried this
For teller = 0 To 170 Step 1
ListBox1.Items.Remove(teller)
Next
But that doesn't work. How do I delete the first 170 rows in my listbox? :)
i want to be able to remove multiple listbox items using one button the code i have tis the following: [code] Now this removes one item from a listbox, i changed the selection mode now now i can select multiple listbox items, but how does the code differ to delete all of the items selected? As currently it just deletes the top of all the selected items!
View 4 RepliesI have a form which is divided into two portions vertically. The first portion contains an listbox in which the user can add names of their family members, and the second portion contains editable fields for details the family members.
View 3 RepliesI have a listbox that gets populated with files paths based on search terms provided by the user. I want the user to be able to select multiple items on the listbox, and then be able to export the files listed to another folder. See the attached image for what I'm talking about.
The problem I'm having is that I don't know how to take the items selected and turn them into a string array. Everything else I can figure out, but this one has me stumped.
basically i had this problem before which i fixed with this code!
'REMOVE TIME
If ListBox1.SelectedIndex <> -1 Then
Dim Box As MsgBoxResult = MsgBox("Are you sure you want to remove this time?", MsgBoxStyle.YesNo)
[Code]....
It worked perfectly, all ive done to my code since is change the way the listboc is loaded / saved, it now comes from a .txt in My Documents rather than the C drive.
It now only deleted the top value of the group selected int he listbox and not all of them as it did before.
I have a combo box with a list of Coordinator IDs, one Coordinator can run many subjects. On another form I have a list box that contains a list of the subjects, and another list box that has the coordinator that teaches the subject. The positions match up, i.e if there is a match for the co-ordinator ID in the list box at position 3, I want to extract the subject list box at position 3 also. The problem is 1 coordinator can teach more than 1 subject. Basically I want to show the subjects taught by the Coordinator the user selects in the combo box. I have tried the following but have had no luck:
[Code]....
I have a listbox that allows a user to have multiple selection and a button to transfer these selected items to another listbox, now theres a new requirement which I also need to indicate the quantity for each respective items. I currently have a Source items select box and a Selected items select box. how to go about designing this feature?
Multiple select box selected Quantity
E.g. Eggs ---> Eggs ---> X 4
Vegetables Potato X 5
Potato
I am trying to display multiple check items from a listbox into a label seperated by a comma. Everything is working fine but the only problem is that when i check first item in the listbox nothing happens and when i check the second item then the label shows the first item. Then when i click third item the label shows the first and the second item and so on. When i uncheck the item it does the same
My question is why it does not show the items in the label as they are selected.
Private Sub lstMonths_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles lstMonths.SelectedIndexChanged
Dim intX As Short
[Code].....
I am using VB.NET (version 2008). I have two types of items populating in a listbox (checked listbox). For example: lets say one is type "A" and other is "Type B". Their names maybe same so if the user sees those items in listbox then he won;t be able to determine their type until he click on them and checks out its properties. I wanted that I add each item to listbox and colour them so that blue for example means type "A" is there and red means the other. So this way I will be able to know at a glance that how many item of what type is present. I guess it may not be possible to do that in a standard checkedlistbox. I am also using component factory's krypton controls which enhance the gui of an application. But I dunno if I can progress using that.
View 5 RepliesOk, so I`ve been studying a bit of VB lately.. bought a few books and read lot`s of articles and seen hours of instructional videos, and I slightly start to get the hang of a few things.. :) I`ve recently started a fun little project, but I seem to lack a bit of knowledge to reach my goal. I`ll first try to describe my project:
[Cde]...
I have a listview, I click an item and I add some informations and I want that once I click the button the next Item it is selected.
View 6 RepliesI was just wondering weather it was possible to make it so that if I press the first a item on listbox1 then the first item on listbox 2 is selected aswell. For example I would like to have 2 listboxes lst1 and lst2 and I would like it so that when I select the first item on lst 1 then the first item on lst2 is automatically selected and when I select the 3rd item on lst1 then the 3rd item on lst2 is also selected.
View 7 RepliesI have been trying to understand how to make thumbnails that I create from a directory, and place in a flow layout panel, selectable. That is, when someone klicks one of the thumbnails that thumbnail should be selected and, either automatically or by the click of a button, a new window (picture viewer) opens and shows the original picture. This is probably very easy to implement, but I am at a loss for the moment.I've tried to find an answer to this by searching the forums, but nothing good has been found so far.
[Code]...
The above code works perfectly and creates thumbnails from the directory c: emp and whatever subdirectory the user writes in the textbox (textbox2). No problem here, it is how to proceed to the next level that has got me stumped. As stated I want the user to be able to select one of the thumnails to get a better look at it in another window. So in selecting it, the procedure should get the path to the original image, and the rest is magic.
Using Webbrowser, I've managed to automate PDF downloads for several of the websites used by our company. I'm still a beginner at this process.Many of our PDF downloads, however, are from a Wells Fargo service called Wholesale Lockbox Image. The problem is that this Wells Fargo site expects the user to select items from a treeview as part of his query criteria. I don't know how to make Webbrowser select these treeview nodes programmatically.
Although I don't know anything about Java, the treeview is definitely a Java control. I know this for several reasons.(1) The instructions on the website specifically state that the the treeview won't draw until Java is installed.
(2) A standard Java splashcreen appears in the little treeview pane until the treeview actually begins to draw. The HTML code has an <OBJECT> tag which includes this attribute: ARCHIVE = "JWLTreeView2.jar"
Using Microsoft's mshtml library, I've tried looping through the elements on the page but can't find anything corresponding to the nodes in the treeview. I've also tried applying EnumChildWindows to the IE window, but here too I found nothing specific to the nodes. When I hover Spy++ over the treeview pane, it only identifies the pane as a whole, not the individual nodes.Furthermore, even when I select the nodes using my mouse, I don't seem to detect any corresponding alteration of the Webbrowser's HTML document (unless I overlooked it somehow).Does anyone have any suggestions on how to make Webbrowser select the treeview nodes programmatically?Oddly, I noticed that if the user saves the webbpage to his harddrive and then loads it into his browser from there, he can still see the treeview and select items (even without logging in to Wells Fargo), although if I bring the page home, the treeview is gone. I guess this means that IE is storing/caching the java file somewhere on the company machine, although I don't know if this fact would help solve my problem...
I want to have a listbox on the left and on the right a textbox and when i select an item in the listbox i want to read a text file or database and display the value related to it and then have the ability to amend the content.
View 2 RepliesI know that the web's full of Q's and A's about how to use IsPostBack when selecting the value of a listbox.I have a stored procedure that returns a few values, and I want in runtime to have all the values be selected in the listbox.But when I loop through the SqlDataReader and do: listbox. Selected Value = reader(0), the final result on the browser is that only the last value gets selected.The listbox's SelectionMode is "Multiple".
View 3 Repliesi have a check list box. i want the user to limit, selecting maximum of three items from the checklistbox. if user select more than that i want a msgbox to prompt.
View 4 Replies