the msg box was prompted with code :
StrInput = InputBox(Prompt:=strMsg, Title:="Location of Files", XPos:=2000, YPos:=2000)
im not sure how to change the size of the box. i want to because my strMsg is quite logn and doesnt look nice in a small box.
I have a combo box and a subform that uses continuous forms format. When Combo box changes, the subform POINTER points to the correct record. How could I at the same time highlight (change color) of all the fields in the selected record?
View 1 RepliesI have the Context Menu Options like ( Small Font , Large Font ) based on the selection I want to change the size of the Font in the Controls,Control's Size & location(x,y,height,width). The resize of the controls should not affect the look and feel of the forms.
View 5 RepliesI have a label which appears full screen on a projector (VGA 2). In this label I will be sending strings. Some one liner's, some wrapped paragraphs. Some multi-line with carrage returns. My goal is to have the font dynamically change size to be as large as possible without overflowing the fixed label size.
View 10 Replieshow to create an 'Access-like' input mask for hastening date data entry.
Using C Pearson's much quoted code I've modified it as such:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim DateStr As String[code]....
Note: I'm aware that most of the time I'm simply re-typing the original code - it was a learning experiencing and I also realised that the different American and Australian date formatting was less of a programming issue due to the systems being set up differently in the first place.My issue is having run tests using only 4 digit entry, all types of digit entry, with and without DateValue on the final DateStr, changing the cell format to text, to general, to date - always results in a code like "8811" (i.e. 08/08/2011) being changed into 01/01/1924 (approximately).
At first I assumed the use of "DateValue" in assigning the final .Formula value was forcing this conversion. However, with or without DateValue it still seems to read the figure as a DateValue and convert it as such.I'm sure it has to be something elemental that I'm missing given the scores of people I alone have seen on boards reading C Pearson's code and not coming up with another peep.
Okay here's what I'm trying to do. I want to change the font size of a label based on the size of the form.If the form size is 0 through let's say 500 I want the label size to be 50. How can I write this?
View 5 RepliesIn newer editions of .Net I can pass -1 for the output size for VarChar(Max) columns, but in Visual Studio 2003 I get the following System.ArgumentException: Invalid parameter Size value '-1'. The value must be greater than or equal to 0. What should I specify as the size for a VarChar(Max) column in Visual Studio 2003?
View 1 RepliesHow do I connect the size of any button in the form to the size of the window so that it would change proportionally to the size of the window?
View 1 RepliesI have multiple copies of Access dbs running varous projects on diverse workstation all over the country. Some new additions to the team have only Access 2007. Is there a way that I can use both versions without having to re-do any VBA, macros, scripts, etc.?
View 2 RepliesI have a program in VB.NET 2005. At some point I have to open an Access2003-Application for getting data in it. I do that by pretending my program is a human user and let it do all the work in Access as a human user would do. Filling Fields, pressing buttons etc. I use the Primary Interop Assemblies for that. So far so good. That code is in use for over half a year now. In the last week I got Office 2007 installed on my machine. Of course I tested the installed version of my program if everthing still works. Every test was succesfull. But if I do the same tests in Visual Studio it always crashes.
All I get is this Errormessage: {"Das COM-Objekt des Typs "Microsoft.Office.Interop.Access.FormClass" kann nicht in den Schnittstellentyp "Microsoft.Office.Interop.Access._Form3" umgewandelt werden. Dieser Vorgang konnte nicht durchgefhrt werden, da der QueryInterface-Aufruf an die COM-Komponente fr die Schnittstelle mit der IID "{66B22FB4-F70E-4F03-A00A-F76E9ADBBF10}" aufgrund des folgenden Fehlers nicht durchgefhrt werden konnte: Schnittstelle nicht untersttzt (Ausnahme von HRESULT: 0x80004002 (E_NOINTERFACE))."}
For all who can't read german:
"Microsoft.Office.Interop.Access.FormClass" can't be converted in to "Microsoft.Office.Interop.Access._Form3" ... Interface is not supported.
Code I use:
Dim access As Microsoft.Office.Interop.Access.Application = Nothing
.
.
.
access = New Microsoft.Office.Interop.Access.Application()
[CODE]...
The Error occurs when I try to access any property of "access.Forms("frmTest")"
I Am about to buy a new office, and I must decide between 2007 and 2003.
I'd like to buy 2007 (same price where I live) but I cannot stand the UI.
Is there a way to make it look like 2003 (for me Word/Excel is enough) ?
[URL]
i have done some research on converting an existing app to VB.NET, but have not found what I am looking for.
My existing app is currently created in Access 2003 VBA using access forms, modules, tables queries etc., and would like to convert all of it to VB.NET.
What would be the best method or tools to use to accomplish this? The VB.NET app would be developed from VisualStudio 2005..
i have a problem in connecting in access 2003
here is my code
Module Module1
Public cn As New ADODB.Connection
[code]......
I'm doing database development in Access 2003, and the Visual Basic portion of it is acting up. It seems to be "refreshing" itself constantly. Two very frustrating problems are occurring because of this: 1) Intellisense for properties and such pops up but immediately disappears and turns red and 2) it's automatically checking the syntax of lines before I can finish typing them.
The problem seems to be intermittant. Some forms in the database operate fine while others immediately turn the line red two seconds after I start typing. I am having this problem on both of the computers that I use on a regular basis.
i have a database in access 2003 and i submit a query to a specific table. The fields of this specific table (STOCK_PRICES1) :
DATE --> type date (d:M:yyyy)
CODE --> type text
OPEN --> type single
HIGH --> type single
LOW --> type single
[Code]...
i receive an error. Why? Conflicts between access 2003 and vb.net 2010? SQL Server is better?And another question. My Regional settings regarding the date is d/M/yyyy but in my vb.net example, the @date1, @date2 parameters accept M/d/yyyy dates. Is there a way to define into the parameters the d/M/yyyy specification?
The limit of an access database. Because I only know of manipulating access 2003 database with vb.net. And were going to make an information system for a small hospital for our project. Is ms access still usable for a hospital with over 2000 patients per year? some database if the ms access that I'm using no longer fits for our project.
View 6 RepliesI Try so many times to change TabPage Size and Form Size when I shif from One TabPAge to another, This because every TabPAge consist of defrent volume of control which need to enlarge and reduce the size. But I couldn't make it.
View 2 RepliesI have a form that has a web browser to display the word doc. I want to be able to edit this word doc with a text box. How can this be done. I searched for this online and came up with this: [URL] But I'm not really sure what to do with it.I have some code: Public
[Code]...
I have a form that has a web browser to display the word doc. I want to be able to edit this word doc with a text box. How can this be done.[URL]
Public
Class Form1
Dim oDocument As Object
[code]....
I'm having trouble getting this sub to work on Windows 2003. It works on Windows XP and Windows 7. Windows 2003 has "wininet.dll".
change_proxy("123.115.112.222:3128")
*********************************
Public Sub change_proxy(ByRef proxy_port As String)
[Code].....
I stucked in trouble recently preparing for distrubute MS Access 2003 Application(mde) with 2003 runtime module.The function SUM() isn't work properly if a table has mulit rows. if mouse over the issued row, then it calculated.If update Office SP1,2,3, it works, which means MS already know the issue.My applcations is running with Access 2003 runtime all the time evenif user alredy have Office installed.Problem is that a user who has Office 2003 product and already updated Office SP, after installed our product, need to update again to fix runtime bugs. This is very weird for users becasue they somethimes need to install SP twice.
View 2 RepliesI'm completing our assignment we are using vb.net as front end and ms access 2003 as back end but are unable to delete data in the database after clicking on delete button it shows result on front end.code for next does not work give code for next
View 2 RepliesI am creating a Microsoft Access 2003 database which will be using Visual Basic code in the backend.I have a form called frmReports. On this form are three option groups consiting of checkboxes. What I want to happen is if one of the checkboxes is checked, then the other two option groups are made invisible.
The context of the problem is a teacher is reporting on pupils. If a pupil is marked as being absent from class, the other two option groups (Behvaviour and Homework) disappear as no other information can be input.
I am looking for a way to convert Access 2003 Forms to VB .NET (2010) forms. I don't care about the code, I can redo that no problem, but the forms have a lot of objects in them and I don't want to recreate them all. Any ideas? Preferably free??
View 2 Repliesi can't link access 2003 to vb6. its say's"unrecognized database format" explain to me in a low english.do i have to create module?i have to create conn.txt? i just have to add source code in a form to link the access 2003??
View 1 RepliesWould like to migrate MS-ACCESS 2003 legacy applications into modern Dot Net, including migration of the MS-ACCESS Database to Sql Server 2008 (with potentially also migration of the MS-ACCESS Reports to Sql Server Reports). The purpose is to move to DotNet application with Sql Server as its database.
[Code]....
I am trying access Active Directory for ADD, REMOVE, and CHANGE user password from VB2010
View 3 RepliesMy application currently works with Access 2003 using the following approach...
strMSAccess_Connection_SQL = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & strDatabaseFilePath
MSAccess_Connection = New OleDbConnection(strMSAccess_Connection_SQL)
[code].....
I have seen some comments about the difference of sqlconnection vs oledbconnection.
View 9 RepliesNOW HERE IS MY CODE
Private Sub btnUpdate_Click()
Dim conn As ADODB.Connection
Dim cmd As ADODB.Command
[code].....