here is the code, i want to clear just the box with the error in it. if possible and leave the other numbers in put as they where.
Private Sub btnCalc_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalc.Click
' the following declare the values that will be used
[Code]....
I have a program in VB.Net that receives mails from Outlook, extracts attachments and inserts the attachments into a table through a query. I would like to put the query/queries in a Try/Catch block, but cannot do so as Outlook exceptions cannot be caught, and it gives me an error, and unless I put a very specific exception, I cannot catch it. Is there a workaround?
Edit:
Try
Catch ex As Exception
End Try
Exception is underlined and when I hover on it, it says: "Catch cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not in 'System.Exception' or a class that inherits from 'System.Exception'". This is affecting all my other code which I'd like to put into a Try/Catch block.
The following code causes a "Warning" that Variable is used before value assigned.How do I restructure this Try/catch to eliminate error on the myreader.close command in the Catch part? Code appears to work fine but I dont like Warnings. [code]
View 8 Repliesi have problem when i click a ADD button, there is one null value in the textbox .. so the try catch statemnt is to catch that null value error but after that the catch is success but the button click never stop excute the statemnt till the end of the button event.
View 6 RepliesI have a timer that runs every time by itself, and for the code the runs in it I would like to have it clear the dataset before it does anything, the timer runs every 10 seconds, so I tried to do dataset.clear but it would crash if the dataset had no values
View 4 RepliesI am using VB.NET 2005 to create a Windows forms application. I have a procedure named SendMail that creates an instance of Outlook.Application, to send an email from my application. I found the code on this forum, I think.The procedure works fine, but I can't use error handling with it.I call the procedure from a button click event. I put the procedure call in a try/catch block, and the application won't build, with the following error.
Error 68 'Catch' cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not 'System.Exception' or a class that inherits from 'System.Exception'. C:datadevdmtiQTSQTSv7_1_20100212wQTSQTSReportsCriteria
pt_frmReportViewer.vb 43 21 QTS
Here is the code:
Sub SendMail(ByVal sFile As String)
' Create an Outlook application.
Dim oApp As Outlook._Application
[code]....
About catch webbrowser input file path.[code]How can i catch the file path into TextBox after i browse the file? such as C:UsersTestDesktopabc.jpg
View 1 RepliesI'm familiar with Visual C# and the try/catch for that but I cannot seem to figure out how to do the same thing in VB. Basically I can't figure out how to get the try/catch to work with text boxes and input from the user and whatnot.I've tried setting the textbox.text property = "" but that has no use, I've been trying to find something on Google about it but I cannot seem to find a single thing about textbox try/catch statements. Is it possible to do it with text boxes?
View 5 RepliesI am using vb2008.net express, I test vs2005term it work, can any tell me what is the input variable and output variable of this terminal? how to catch the input and output variable to a textbox1 for sending and a textbox2 for receiving when I press send button? is that possible? I attach the example of my question this is a a good source, but it is not relate to my problem: [url]...
View 1 RepliesUser inputs values into textboxes , user hits calculate(Button) user needs to be able to input new values so.
[Code]....
I am using a datagridview as an input screen for repetitive inputs of a similar nature. Once I have saved the data, is it possible to clear the input in the grid for the next round of inputs. At present, all I seem to be able to do is clear all the rows and then create a new set of rows.
[Code]...
I have a reset button created in my VB form, but don't know how to code it so that it will accomplish what I want. I want it to clear the form's text boxes so that new input can be entered. I could just code an end statement but this closes the form, and I want to keep it open to continue working with it.
View 6 RepliesI have built up an interface in VB2008 with many textboxs and labels on. When I click "New", I would like to clear all the textboxs and labels, i.e. each with a NULL value. Meanwhile, I also would like to clear all the arrays behind the program, i.e. the arrays which are not shown on the interface but is important for the calculation.The only way I could find out now is to clear the textboxs, labels and arrays one by one. So if there are 100 textboxs, 100 arrays, I have to write 200 lines in total. Obviously, it is not expected. Is there any other quick ways to directly reset everything to the beginning when the interface is just opened?
View 5 RepliesWith Try/Catch is there a way to catch a MSSQL error by Msg ID? I want to catch a 208 when a table is not found and then create it. I found mockup code in C# but nothing VB.NET wise as to how to grab the Error ID.
View 1 RepliesI have the code below which I now need to figure out how to not only display but also email it all to my email, this way should any user encounter a error we get to see exactly what is it.
[Code]...
So I want to now if that possible for .NET languages to ignore error without using try catch construction ?
I can ignore warring with #nowarring 40 for example, can I ignore error ?
simply wanted to call system pause with this way
open System.Runtime.InteropServices
[<DllImport(@"msvcrt.dll")>]
extern void system(string str)
system "pause"
but got Error message
unbalanced stack. This is probably because the managed PInvoke signature does not match the unmanaged target signature. Make sure that the calling convention and parameters of the PInvoke signature match the target unmanaged signature.
So I don't care, it works. But can I just ignore this error ? without doing weird stuff like that :
try (system "pause") catch |_->()
Ok , I solved my problem by adding CallingConvention=CallingConvention.Cdecl, but what the question was about skipping exceptions, so and I still don't know if I can do it.
So maybe I need to tell some real reason to not be down-voted hard - sometimes it's matters for program to live even with hard errors occupations, but even sometimes you don't need to catch them. You need just ignore them...
Why would my try-catch block still be throwing an error when it's handled?[code].......
View 8 Repliesi must receive that block of an error message from lblfeedback when it happens so i can sort out the problem before the phone rings. i have this block of code
[Code]....
Is there a way to catch a database exception and then redirect to an error page? I have a data access class that I use to make a sql connection and then functions that call it to execute my SQL commands. My problem is that if my database is not available I cannot catch that error. Here is the code I am using in my class[code]...
View 3 RepliesFirst I found that you can catch it and log it inside a catch, but this doesn't send an email. Then I found out about using the Error Signal class. That worked, however what wasn't apparent from reading, is that it treats the error like normal, so when I signal the error it goes to the custom error page still, I don't want that to happen. What I want to do is catch that error, log it, send the email, but stay on the page the error happened so I can provide special feedback. I do not want it go to the custom error page.
This is what I have and it redirects me to the custom error page.
Try
smtpClient.Send(mailMessage)
Catch smtpEx As SmtpException
errorSignal.FromCurrentContext().Raise(smtpEx)
Catch ex As Exception
[Code] .....
I m selecting the folder & playing all the files in the media player, of that folder. As u know folder contains all types of files including text,zip,image & so on.So I want that when URL that is assigned to Media Player is .txt,then i assign any default image from resources.I do not want to check extensions-Currently I m checking the extension of each file before paying but i dont want dat.
Public Class Form1
Public Ext_bmp As String = ".bmp"
Public Ext_jpg As String = ".jpg"
[code]......
I have written another windows application A. I then use another application B using process to run the application A. My main problem is to catch the error generated by application A so that application B can then perform some actions.
View 7 RepliesIn my code I'm using the Try-Catch functionality. All errors are written to the event viewer.I do it now with identifying the lines of code with a number.
View 7 RepliesPart of my assignment is to check if input to Group Number and Number of Units are correct input by making error handling exceptions...
I have to check the following:
a) group number is neither 501 nor 062
b) number of units are NOT numbers
c) number of units is NOT a positive number
So my first question is, am I checking correctly? 2nd question is, How do I make sure my Exceptions will pertain to their correct respective things (a, b, and c.. above)?
[Code]...
Suppose in VB.NET you have:
Try
Debug.Print("Trying...")
Catch ex as Exception
throw new Exception("Exception", ex)
Finally
Debug.Print("Finally...")
End Try
How would you write this using the "On Error Goto" construct? (please no questions asking why I would want to do this, just curious if it can be done).
How can I catch 404 error on web browser control?
Try
TimeTable.Navigate("URL/File.htm")
Catch ex As Exception
TimeTable.Navigate("URL/File2.html")
End Try
I am trying to catch an error while dimensioning the DA (SQL Data adapter)Have not used Try ..Catch so pls bear with me for this juvenile crime!
Code:
Try Dim da As New SqlDataAdapter Dim ds As New Data.DataSet If conn.State <> ConnectionState.Open Then conn.Open() da.SelectCommand = New SqlCommand da.SelectCommand.Connection = conn
Catch ex As Exception MsgBox(ex.Message)Finally 'conn.Close() ' endEnd Try What I am trying to do is the catch the "object not set to an instance of an object error" and if caught I want to continue.I would like to know what to add in the Finally section?I have not tried this I would like the gurus for any inputs before I try it in my program.
I have a SqlDataSource and a GridView.
What I want to do is, while the query is executed (i.e. for inserting a data), then after the data has inserted successfully, it should appear a message sounds: "The data deleted successfully". I've solved it by using GridView1_RowDeleted method.
Now the problem is, I want to catch the error while the query is failed to executed. If the query has failed to execute, then it should appear a message: "The data failed to insert."
I'm interested in having a generic 'Try Catch' clause, with some case statements or if/than statements within the Catch part so that I can handle different error types differently. some way to get ex.Errorcode or ex.ErrorType that differentiates the different errors to a unique value.
How can this be done?
Try
'some code taht will throw an error'
Catch ex AS Exception
If ex.ErrorCode = 20 then
' Do something'
[Code].....
A developer has created a custom control in ASP.NET using VB.NET. The custom control uses a repeater. In certain scenarios, the rpt_ItemDataBound event is encountering a data error. My goal is rather than having the user see the yellow screen of death, give the user a friendlier error explaining exactly what the data error is. I figured I would be able to use a Try/Catch block as shown below throw the exception, however, it appears that the event has nowhere to be thrown to and stops executing at the "End Try" line.
Protected Sub rpt_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles rpt1.ItemDataBound, rpt2.ItemDataBound
Try
ProcessBadData...
Catch ex As Exception
Throw ex
End Try
End Sub
In VB.NET, I can find where the repeater's DataSource is being set, however, I can not find a DataBind event. How I can capture the exception in this ASCX control so I can report it to the user. The stack trace looks like this. There is another repeater within the repeater that is actually causing the error (rptOther) and I'm able to catch the error, but I can only throw it to the rpt_ItemDataBound. How rpt_ItemDataBound is getting called without a DataBind event.
at Company.WebForms.Control.rptOther_ItemDataBound(Object sender, RepeaterItemEventArgs e)
at System.Web.UI.WebControls.Repeater.OnItemDataBound(RepeaterItemEventArgs e)
at System.Web.UI.WebControls.Repeater.CreateItem(Int32 itemIndex, ListItemType itemType, Boolean dataBind, Object dataItem)
at System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource)
at System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e)
at System.Web.UI.WebControls.Repeater.DataBind()
at Company.WebForms.Control.rpt_ItemDataBound(Object sender, RepeaterItemEventArgs e)