Is there a way to catch a database exception and then redirect to an error page? I have a data access class that I use to make a sql connection and then functions that call it to execute my SQL commands. My problem is that if my database is not available I cannot catch that error. Here is the code I am using in my class[code]...
View 3 RepliesHow can I catch error if the data that user select not in database?
This is my code.[code...]
I have a program in VB.Net that receives mails from Outlook, extracts attachments and inserts the attachments into a table through a query. I would like to put the query/queries in a Try/Catch block, but cannot do so as Outlook exceptions cannot be caught, and it gives me an error, and unless I put a very specific exception, I cannot catch it. Is there a workaround?
Edit:
Try
Catch ex As Exception
End Try
Exception is underlined and when I hover on it, it says: "Catch cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not in 'System.Exception' or a class that inherits from 'System.Exception'". This is affecting all my other code which I'd like to put into a Try/Catch block.
The following code causes a "Warning" that Variable is used before value assigned.How do I restructure this Try/catch to eliminate error on the myreader.close command in the Catch part? Code appears to work fine but I dont like Warnings. [code]
View 8 Repliesi have problem when i click a ADD button, there is one null value in the textbox .. so the try catch statemnt is to catch that null value error but after that the catch is success but the button click never stop excute the statemnt till the end of the button event.
View 6 Repliesi am using access database for my program. now i have connected to the database in MDI form of main exe, and ir also works, user can log in, it gets verified etc etc etc. now here is the problem, when i load a form from dll and try to use any sql query on that form, i get message, "database connection is not opened". so what i did was, i added the connect() (a function i designed to connect to database) in the load part of the dll's form, it made the trick, query's started to run, everything went fine, and when i reload the form i.e after closing the form, i load it again from MDI form, i get error, connection already open..
[Code]....
I am using VB.NET 2005 to create a Windows forms application. I have a procedure named SendMail that creates an instance of Outlook.Application, to send an email from my application. I found the code on this forum, I think.The procedure works fine, but I can't use error handling with it.I call the procedure from a button click event. I put the procedure call in a try/catch block, and the application won't build, with the following error.
Error 68 'Catch' cannot catch type 'Microsoft.Office.Interop.Outlook.Exception' because it is not 'System.Exception' or a class that inherits from 'System.Exception'. C:datadevdmtiQTSQTSv7_1_20100212wQTSQTSReportsCriteria
pt_frmReportViewer.vb 43 21 QTS
Here is the code:
Sub SendMail(ByVal sFile As String)
' Create an Outlook application.
Dim oApp As Outlook._Application
[code]....
This is what I'm getting when I try to connect my MS Access mdb database to my program. It keeps asking me to enter a connection string and when I do this is the error I'm getting."Format of the initialization string does not conform to specification starting at index 0.
View 2 Repliesso for one of my assignments i have to use a databse that the professor provided but every time i attempt to establish a connection to the database that i downloaded it gives me this error, i have tried on both my desktop and laptop with no success. the picture is kind of hard to read but hte error says The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local deafult machine.
View 8 RepliesI am trying to upload a SQL dataBase onto VBasic, but I keep getting a connection error Error version 655, the application useses versions of 612 and earlier.What can I do to fix this error. I am using SQL server 2008 and Visual Basic 2008...
View 5 Repliesa) If the function returns true OR false will utilising the 'Using/End Using connection' statement close the connection cleanly? b) Is the 'Return TRUE statement' suitable placed to allow an error to occur and be raised returning a value of FALSE?
Public function doSomething () as boolean
Using conn As New SqlConnection(My.Settings.SQLConn)
Try
[code].....
Dim con As New OleDb.OleDbConnection
Try
con.ConnectionString = "PROVIDER=Microsoft.Jet.OLEDB.4.0;Data Source = D:\project\login.mdb"
con.Open()
str = "insert into table1 values(" & Text1.text & ",'" & Text2.text & "')"
cmd = New OleDbCommand(str, con)
cmd.ExecuteNonQuery()
[Code] .....
If I insert integer value it will be updated in database every thing is ok but when I want to write some string in my textboxes and want to send them I get connection error.
I keeping getting an error.Seems to be the connection string.Error happens at connection.Open()
Error Message:Cannot open database "C:UsersJEREDocumentsVisual Studio 2008ProjectsBaseball2009Baseball2009DatabaseBaseball2009.sd"
requested by the login. The login failed. Login failed for user 'JERE-PCJERE'.
Imports System.Data.SqlClient
Public Class Field
Private Sub Field_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load[code]..........
I want to handle errors that might occur when user tries to connect to database. I don't know how to do that.This is my connection string used all over the program:
Using connection As New OleDb.OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + txtFilePath.Text + ";Jet OLEDB:Database Password=" + txtFilePassword.Text + ";")
There are a few errors that i faced them myself:
[code].....
I just bought the MCTS Self-Paced Training Kit (Exam 70-561): Microsoft.NET Framework 3.5 - ADO.NET Application Development, and am trying to do the Lab Exercises now. Allready at the first exercise (point 8), where I am supposed to make an "UNIT TEST",[code]
View 5 RepliesI've added a database to my application with 2 fields:"ip" address and "started" that holds the number the application was started from that specific IP.I want to upload the database to my site hosted at google.sites. When the program is started it should make a connection with the following cases:
1-no connection with the database (possible no internet available) - it should display an error message
2-there is connection, the IP is not stored on the database, it addes the IP to the database and the field "started" with the value 1
3-there is connection, the IP is stored on the database, it increments the field "started" by 1
MVC3, VB.NET, using EF. I am working on coding up a simple function to handle checking for a valid MySQL connection. If the connection fails the test it will use the secondary server connection. This is required because our hosting provider does not provide failover or redundant MySQL servers. The problem is I tried to use a simple try catch method in the HomeController. This fails early because the Entity Framework is looking the connection that was set up when I set it up... Is there anyway to control that connection dynamically?
View 1 RepliesI have an MS Access 2003 database built that resides on a shared network path at the company I work for.The database works perfectly for users connected directly to the company network.However, when a user tries to open the database while connected remotely to the company network (they can still access the shared path), they receive the following error:The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time.At the time that they tried it, they were the only person accessing the database.They tried a local copy as well as a copy on the network shared drive.[code]
View 4 RepliesI have attached Database to my vb.net application. Client has sql server 2008 express installed.I built my application and gave to him. he is encountering errors.
PHP
"Data Source=.SQLExpress;Database=xx.mdf;Trusted_Connection=True;Integrated Security=False"
i am getting Cannot Open Database for requested Login. Login Failed. i am using SQL 2008 server Developer edition. And using Windows Authentication mode.
My code below. Problem description in comments.
Public Class Form1
'My local IP (going to be set to 127.0.0.1)
Private LocalIP As System.Net.IPAddress
[code]....
I am using VB 2008 Express and have created an application that connects to a SQL database to populate a datagrid.The application is working properly on my computer but will not on others 'remote connection permissions' error.After some googleing I found that the express version is crippled to only work on local machines that use a database.If I purchase Visual Studio 2008 Standard Edition, import and rebuild my application, will my application be able to run properly on other PC's?
View 7 Repliesi have an application. which is executed after every 5 mins. i have an open connection but it gives me the following error:
ExecuteScalar requires an open and available Connection. The connection's current state is closed.
my code is something like this. I have shown where all i am using ExceuteScalar()
Sub Main()
Try
connection.open()
cmd.ExecuteScalar()
[code]....
I have a simple scraper. It works on some websites, but on some there is this Error:
Quote:
IOException was unhandled Unable to read data from the transport connection: The connection was closed
It is occuring at "Dim htmlresults As String = Urlcontents.ReadToEnd()".
'Create the HttpWebRequest object
Dim req As HttpWebRequest = WebRequest.Create(URL)
'Set the timeout to 1 second (or 1,000 milliseconds)
req.Timeout = 10000
[code]....
Is there a way to display the connection properties dialog for connection string browsing(for database) in run time?
As I want the user to be able to connect to various database using the GUI.
After running the following sub (VS debugger), I try to detach the database in SSMS, but it shows the connection open still and won't let me detach. If I close program in debugger, the database shows no connections. I check the dataadapter's connection in the finally block and is shows closed. What gives
Private Function ClientMasterDBFiles(ByVal MasterClientDBConnection As String, ByVal DBName As String) As DataTable
[Code]...
With Try/Catch is there a way to catch a MSSQL error by Msg ID? I want to catch a 208 when a table is not found and then create it. I found mockup code in C# but nothing VB.NET wise as to how to grab the Error ID.
View 1 RepliesI have written a program which connects to MS sql express 2008 using the string below. This is OK on my computer but when I try to run this on a client computer I get the following message: "An attempt to attatch an auto-named database for file :(C:UsersBarry2010 vb programsadotrialadotrialResults 6.mdf) failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
[Code]...
I have the code below which I now need to figure out how to not only display but also email it all to my email, this way should any user encounter a error we get to see exactly what is it.
[Code]...
So I want to now if that possible for .NET languages to ignore error without using try catch construction ?
I can ignore warring with #nowarring 40 for example, can I ignore error ?
simply wanted to call system pause with this way
open System.Runtime.InteropServices
[<DllImport(@"msvcrt.dll")>]
extern void system(string str)
system "pause"
but got Error message
unbalanced stack. This is probably because the managed PInvoke signature does not match the unmanaged target signature. Make sure that the calling convention and parameters of the PInvoke signature match the target unmanaged signature.
So I don't care, it works. But can I just ignore this error ? without doing weird stuff like that :
try (system "pause") catch |_->()
Ok , I solved my problem by adding CallingConvention=CallingConvention.Cdecl, but what the question was about skipping exceptions, so and I still don't know if I can do it.
So maybe I need to tell some real reason to not be down-voted hard - sometimes it's matters for program to live even with hard errors occupations, but even sometimes you don't need to catch them. You need just ignore them...
This will happen at random, and I can always just catch the error and re-establish connection to the server, but I am confused as to why. When doing lots of inserting into the sql server, I only establish one connection that is public, instead of many little connections. I had my doubts on a public sql connection, but it's been running great, and I've seen no problems until this morning. Again, this random moment I hit an error that stated, sql connection state is broken. Is it bad practice to just accept this error, and when it happens, re-establish the connection?
View 7 Replies