Connect The EPP (Encrypted Pin Pad ) Device To Computer By Using Mscomm Control?
Mar 14, 2012
Currently, i am trying to connect the EPP (Encrypted Pin Pad ) device to my computer by using mscomm control. May i know what are the possibility problems may cause the DSRHolding does not return to "True"?
I am trying to read data from an external device using MSComm control but the problem is I am getting wrong data. I am recieving 1 byte data but the first three bits are wrong so anything greater than 31 sent from the external devices is recieved wrongly. eg. if I am sending 63(111111) from the device then the input from MSComm control gives me 159(10011111).Due to this reason I tried SerialPort from .Net framework and was surprised to see that it is working properly.
Can i please get a copy of the code which you used to get the MSCOMM to connect to the robot and send single bytes of information? Having loads of errors with my code.Working on a similar project but using the mind-storm nxt kit.?
can i in some way change the power that the usb sends to a usb device?i want to connect a computer fan to the usb and control the speed is this posible??
How do I connect to a device through a USB port. Saying I know what the device ID is. I want to open up serialized communication between me and the device.
i'm kind of new to this. I'm using VB2008 and i need to write a code for recognizing a usb's details. like port number and letter and serial number if they have one. if i need to be more specific, then i have to say its for a machine that records data and i need to transfer that data over to my laptop through a gpib to usb cable. the cable has a specific "id" and i need to find that out and type it into the program interface that i'll make when i know how to detect that "id" so it can connect.i've read a few forum posts by others and they are really informative but not what i could use or i could not make it work.(yet)[URL]..and the other links posted there.for reading and helping. thats the clearest way i can explain. if anyone needs a more specific detail, just ask because i dont know if i left out anything else.
Anyone know how we can connect a USB cable to one of the ports on the computer and send keys to it and have that acted like it was a keyboard if the cable was connected to another computer? I'm sure the USB jump drive for example is like a mini-computer, so how do we do the same thing but with a computer? Is there any code in VB, .NET for this?
I have 1problem...i want to connect device and then the device can display the output in mysystem design.the system is for display value output in decimal.so,how to create code for the projek?and than the device use port usb...how to connect device with my system?
I am building a simple network browser that pings a specified range of IP addresses, and if a response is discovered, it gets the host name and MAC address of the device it pinged.My first question is how can I find the operating system of the device (if it's a computer)?My second question is, for devices that aren't computers e.g. a wireless printer or router, is there a way I can find out what type of device it is?
I am working on a way to send commands to an Arduino board from a web site. The Arduino board is connected to the computer via a USB port (a COM port).
I have managed to connect and control the board using a VB.NET program. I also wrote a VB.NET class that can instantiate a COM connection and send and receive messages.
My next step is to basically create a program that will act as a proxy between my web server (IIS 7 running on Windows Vista) and the Arduino board. When a user gets to my ASP.NET page, the page will then send a command to the proxy to open the COM connection. When the connection is open and ready then I can send commands to the proxy. In turn, the proxy will send these commands to the board and listen for the responses it receives from the board. The proxy will then pass these messages back to the ASP.NET page.
The main issue I see occurring is that if a second user opens the web page and tries to open the COM port, there will be an error. Will this cause the first connection to fail? I guess I can first check if the port is already in use and give the second user a message. Are there any other potential challenges I am missing or not seeing?
I'm trying to connect to an external device using a serial port. I found a couple of tutorials with demo code and tried these. Unfortunately they all return the same gibberish unreadible result.[code]I'm sure my port settings are correct (I have the communication protocol of the device.)
I am developing a software that will monitor/poll serveral Modbus/TCP devices on a network.
I have managed to connect to one device using VB.Does anyone know of a driver or perhaps a 3rd party software I could use that will enable me to connect to more than one Modbus/TCP device?
I am attempting to find some code to use in VB.NET to decrypt a string that has been encrypted using the Java crypto libary.All of the code I have found so far uses an Initialisation Vector and Key to decrypt but the string has been encrypted using the Key only. (Using an Initialisation Vector is apperently an optional step in Java).Does anyone know of code that I can use (preferably in VB.NET but i could convert C#) to decrypt AES 128 Bit encoded string without an Initialisation Vector?
I'm trying to develop a windows application where i can get connected to remote server and look for process state going in remote server.We have many remote servers where automatic installation of software going on. We have an xml file(installstatus.xml) where it tells us at what stage the installation is (Example : Inprogress , Completed, Failed.)
So our aim is to develop a windows application where i can get connected to that servers and look for their installation status(may be we can use installstatus.xml to look for installation status). Every time i connect to a server, the server information should get stored in XML file(i want to create a xml file where all the servers list i connect to should get stored)
The UI at left side should will have list of servers i can connect to. When i get connected to server, at right side of UI, i want to display the status of installation (In progress, failed , completed).
I'm doing a project with vb.net (smart device) on visual studio 2008 and I need to connect to a database on the device itself (I do not have a physical device to test, only emulation). How should I go about doing it? I would like the database to be in the device on start up.
I am trying to connect to copy some files to another computer on LAN, but the problem is it asks for user name and password, now how do i provide user name and password through my application
I'm using vb2008 with DB Msaccess 2003 in the first my language it's not very well so I'm sorry fro bad expression I have two computer ( Pc1,Pc2)I put the program(exe) with DB on the PC1 , then I put the program(exe) on the pc2 the pc1 connect to pc2 how do I deal(connect) with DB from Pc2 ?
how to connect to a database of another computer in same local network using vb.net? We already enable remote connection in the sql server configuration and also sql browser and we already connected with one another using wireless network. Here is our connection in vb.net
"Data Source=NEWUSER0602akzSQLEXPRESS;Initial Catalog=sample;Integrated Security=True" is there something wrong with this? because when i input a data it always show me the error "An network-related or instance-specific error occurred while establishing to SQL Server"
how can connect to sql server 2005 or 2008 by vb.net from anther computer ? and this computer donot have sql server.i made search on internet and result was use sql client tools but i made search and try to download sql client tools but i did not get any result.so how can i connect to sql server 2005 or 2008 by vb.net on anther computer or on network LAN.
I created an executable file of an application done in VB Express 2010 which connects to a Access 2010 database. When installling the executable file at one of the user's computer, the file is installed correctly, but it fail's when trying to connect to the database. It says that Microsoft Dataengine cannot open the database. The user's computer doesn't have Access installed, does it need to be installed? or can I install a framework or application to avoid installing Access at the user's computer?