I took picture box and some container controls on my MDI form but when I am opening my child forms it going to backside of my MDI forms controls.
How can I resolve this issue because I cannot remove my controls from my MDI form but at the same time I want to use my child form worked properly.
my application have a main form. i have set the isMDIcontainer to true on the form properties. How do i set other forms to child form of the parent. i need to do this because the other forms start position is CenterParent.but as it is now when i run the program the other forms start position is not the parent form centre.Secondly, how do i disable the parent form when a child form is on display. so that user cannot click on the parent form until the child form is closed.
View 1 RepliesInside a form, I would like to display a pdf file which is already available in my resources (template file "untitled"). In this pdf file, I have some fields which get their values from some texboxes in another form. My aim is, when the user triggers the button to call this form, it should insert the values inside the pdf file and display the output pdf inside the form.I have written the code to an extend but could not finish it myself after my many trials... Now here are the two things I cannot manage:I can use a directory to read the template pdf "untitled1.pdf". But my aim is to use the file inside my resources. can save the output file in a directory but this is not I want to do. I want to display the output pdf.
View 1 RepliesI have a slight problem With an enumaration of child controls on a form. The following code will not get but about have the controls that are on the form. The controls show that the count is correct but when it goes through the loop it skips over some of the controls. If you run it through the enumeration two or three times it will get all the controls a few at a time. The solution uses two forms, one that has the controls and the other that labels are made and displayed on. The Tx is just a index to add a number to the label.name and rename the label. So each label is identified seperately. This works for all the the controls that are seen in the for each loop.
View 11 RepliesUpdating a VB6 prog in VS2005 on Windows 7. The prog has an MDI + child forms and there are a number of content types, with varying numbers of controls being set up and positioned from setup files.On forms which are not child forms I can easily add controls at run time like this:
Dim lab As New Label
With lab
.Left = 0 : .Top = 0
.Width = 800 : .Height = 800
[code]....
This doesn't work on a child form, no label is visible. Can't see any obvious problem in quickwatch.
Updating a VB6 prog in VS2005 on Windows 7. The prog has an MDI + child forms and there are a number of content types, with varying numbers of controls being set up and positioned from setup files.On forms which are not child forms I can easily add controls at run time like this:
Dim lab As New Label
With lab
.Left = 0 : .Top = 0
[code]....
This doesn't work on a child form, no label is visible. Can't see any obvious problem in quickwatch. Is there some known reason for this or do I just have a wierd bug?
Does anyone know how to make the controls on an MDI Child form resize along with the form itself? I inherited a project from another developer and I was asked specifically to make the form resize. With advice I received on this forum I now have the form resizing as expected. It will minimize, restore and maximize as well as resize with the mouse pointer.
The problem is that when I increase the size of the form all I get is more blank space on the screen. The controls to do change at all. Although I thin this is normal behavior for a Windows form my bosses all seem to think that the controls resize on every other widows for they see. I wondered if anyone had successfully accomplished this. I was already advised to write a FormResize handling subroutine and this unfortunately did not work.
I have an issue when I place a label box in the MDI Parent form and then open a child form the label box highlighted in child form?
View 6 Repliesmy project is on the verge of completion and a large part of the credit goes to daniweb.now m stuck with a very annoying problm. ive googled the whole day but to no avail.m using visual studion 2005 and access 07.ive clubbed these three problms together cause i thought they might be related somehow...
1) i want the mdi child screen to be maximized. but on the first attempt only the control box goes to the top rite corner. however on the 2nd attempt it gets sorted out.ive tried to set the initial state to maximized but with same result. please help
2) whn the form loads it gives this tiling effect.. like the effect a tube light gives whn it is switced on...which is very annoying.
ive search for the result and some recommended to change the resolution of the user screen which is not acceptable to me.cant i change the resolution of my application depending on the user's resolution.
3) whn the form is maximized i want its user control or contents to change their alignment accordingly...anchor property only changes the size however the ideal thing will be to change the controls position w.r.t the container or form...
I have an MDI application which uses fixed sized forms. I've started to change the forms to sizeable and anchored the controls so they move when the form is resized. If the child form has a menu this jumps onto the parent menu (as it always has done) but all the controls move up the form at runtime and leave a space at the bottom of the child. If I change the form in design mode to cut through the bottom controls i.e. so the form doesn't appear tall enough, it corrects itself at runtime. Is there another workaround as it looks misleading in the designer.
View 3 RepliesI have a MDI Form that has a child form containing a text box. I want to be able to make a call to the TextBox's cut() method on the currentlly active child form. Here's what I have so far, but it is complaining about using ctrl.cut()
[Code]...
i use a picture control in mdi form .. but when i load child froms then mdi form picture are also show in front of child form...
View 7 RepliesI have an outlook application, whenever the user receive a new mail I show him a form and some controls
The user needs to insert information and close the form. Sometimes the user is not near his machine so whenever there is a new mail I am adding new controls and modify the child size.
It has been successful using the Form.show() method but not in showdialog() i cant add controls and change the form size can someone please help on the subject?
[Code]...
When I click on Borrow Book(s) from Transaction menu it should open frmborrow.vb
Also to it should do the same to rest of the menu(s)......
What should i write in the click event for Borrow Books from Menustrip menu
I have a MenuStrip with File > New, Open, Save, Exit located in a parent form, and a RichTextBox located in a child form.The problem I'm running into is concerned with the destination of the file elected from "Open" and the save.When a user selects their file from "Open", I need it to open the child form and put the text into the RichTextBox.I also need the program to be able to "Save" from a child form, whether it's been brought up via "New" or "Open".
View 3 RepliesThe following code does create a form within a form and does place NotePad inside the child form. You have to manually start NotePad prior to execution (I work on that later) but the code does workŠ My problem is now I want to manipulate the properties of notepad i.e. focus, size, location, etc. but I cannot figure out how to reference notepad and its properties.
[Code]...
i have my main child form open. then i show the new form:
[Code]...
but when the form opens it flickers a lot. so i want move the new form behind the main form while it loads so the user does not see the flicker. once it is done loading i will set the form to topmost. how do i move the new form behind the main form?
Just like an array in a group box or a frame as i used in vb6.
If there are 5 customers details then when i load the form it will add (PictureBox, Label and a listbox) for each customer dynamically and display them with their information. Moreover, if i add 6th Customer information in the database then next time i load the form it should display his/her information as well. I did this in VB6 sometimes back but need a start to do in .net
Private Sub LoadCustomerInformation()
Dim Qry As String
Dim RS As New Recordset
[Code].....
How do I Display controls in a Mdi panel or menuStrip when a certain form is active?
View 4 RepliesI didn't get the result I want from the following code:
Private Sub tblView_SelectionChanged(ByVal sender As System.oject, ByVal e as System.EventArgs)Handles tblView.SelectionChanged
Dim st As String = tblView.SelectedRows.ToString
[Code]....
I wanted the data I selected on the datagridview row to be display in the textbox, but it displays the error message that st(0) produces "S" which is incompatible to my RackID data type.
i am asking about using the progress bar into the status bar to move when i load any child form inside the MDIParent form.
View 1 RepliesHere is the pertinent part of my code:
Public Class Form1
Inherits System.Windows.Forms.Form
Private Sub MenuItem3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs)
[code].....
As Autodesk is going to discontinue VBA for their Inventor product in the near future I have been looking at other ways to run VB.NET in Inventor. To date it doesn't look like VSTA will be the replacement. Automation from an External VB.NET app is certainly possible, but leaves something to be desired for speed and integration. Compiled Add Ins are the Cadillac of choice but can be a royal pain to debug and develop. Autodesk now provides a lightweight VB.NET script interface called iLogic. It's main purpose is to allow extreme customization of Solid Modeling parts. The code actually resides inside the Part Model file.
[Code]...
I am developing a application where I have 1 parent from (windowstate of Parent from is set to Maximized) and 2 child forms. In my Parent form I have a menustrip with following code to activate child -
[Code]...
I have a VB. Net App where I want the user to open a modeless form which contains reference information about items in a select box. If the user double clicks the item selected in the list box a modal form is opened to edit the item.I want the previously opened reference form to remain active/enabled, that is, I want the user to be able to click on it, move it, etc.I was able to get the form to at least show up on the task bar by setting it's "ShowInTaskBar" property to true, however, when it comes to the front the user can still not move it to the side to view all of the Edit Forms information.
View 7 Repliesi am having some trouble in my Windows form application. i have 2 forms1st Main / Parent Form2nd Sub / Child Form (Menu)
View 7 RepliesIt has to be a simple line of code but I do not know how to construct it. Using VB 2010 Express, I have a MDI parent form and many child forms. I want the parent form to determine what child form is active and load data into the RichTextBox1 on the child form. Each Child form has a RichTextBox1. The parent form gets its data by loading a file.
I am close to a solution but just can't get there. You will see in the code below, if I make a direct reference to a specific child form, it works great. What I want to do is to use the Active Form function to determine which form to write to. I have looked at the MS tutorial which gets me close.
Private
Sub OpenToolStripMenuItem_Click(ByVal sender
As System.Object,
[Code].....
I have a program I've been working on for some time now and I'd like to try to streamline it somewhat. I have a main menu form that has a split panel, in the left panel is a treeview that displays forms you can open and when one is selected, it opens in a child window in the right panel. Each time I open form I called DWNForm, it does a series of dataset loads which are the populating items for a series of listviews.
What I would like to do is have these datasets load once during the mainMenu load and then have the DWNForm be able to access the datasets once it is called from the treeview selection.
I have two forms. Form A and Form B. Form A has a datagrid that is populated from a SQL Database Table query. When a button is pressed Form B is launched that allows you to add a record to the database table. I need for the datagrid to be refreshed and show the newly added record when I close form B and go back to the parent.
[Code]...
I want to create an IMAGELIST in a main form and add to it then have it accessible within a child form. I found several MS examples on database shared access but this is NOT the concept I am after. Straight forward:
Child_Form.<function_to_execute_in_child_form>(The_Passed_Imagelist)
So, within the child form it want to do whatever I like to the IMAGELIST! I have tried passing the object by reference and anything I could think of.