Mdi Child Maximize, Form Tiling And Alignment Of Controls?
Jun 22, 2010
my project is on the verge of completion and a large part of the credit goes to daniweb.now m stuck with a very annoying problm. ive googled the whole day but to no avail.m using visual studion 2005 and access 07.ive clubbed these three problms together cause i thought they might be related somehow...
1) i want the mdi child screen to be maximized. but on the first attempt only the control box goes to the top rite corner. however on the 2nd attempt it gets sorted out.ive tried to set the initial state to maximized but with same result. please help
2) whn the form loads it gives this tiling effect.. like the effect a tube light gives whn it is switced on...which is very annoying.
ive search for the result and some recommended to change the resolution of the user screen which is not acceptable to me.cant i change the resolution of my application depending on the user's resolution.
3) whn the form is maximized i want its user control or contents to change their alignment accordingly...anchor property only changes the size however the ideal thing will be to change the controls position w.r.t the container or form...
How can I put the childform in the center of it parent while in a maximize state because If I maximize it then they the child will stack on the left side of the parent and will have long empty space on the right side.
I have a child form is form1 and parent form is mainform. You can see form1 below at picture1. I want when i maximize form1 it like picture2. Normally, when i maximize form1 , it doesn't like i expect.
I have a slight problem With an enumaration of child controls on a form. The following code will not get but about have the controls that are on the form. The controls show that the count is correct but when it goes through the loop it skips over some of the controls. If you run it through the enumeration two or three times it will get all the controls a few at a time. The solution uses two forms, one that has the controls and the other that labels are made and displayed on. The Tx is just a index to add a number to the label.name and rename the label. So each label is identified seperately. This works for all the the controls that are seen in the for each loop.
I want to maximize my form size when i maximize my window. means when i double click on window to maximize then my form also get maximize with window, i used dock property bt still not getting proper result.
I have searched for an answer to this but have not found anything satisfactory but basically my MDI parent and MDI child both need to use an icon under my resources.When the Main form opens its child form the child keeps turning the normally sized icon into a large stupidly sized icon which throws out the layout of the menu strip.The additional thing is I deliberately tell the child not to have an icon when maximised or when initially called, yet the icon insists on going to a large size every time I open the child form.The Icon is 32x32 and here is the initialisation code of the parent,[code]
Updating a VB6 prog in VS2005 on Windows 7. The prog has an MDI + child forms and there are a number of content types, with varying numbers of controls being set up and positioned from setup files.On forms which are not child forms I can easily add controls at run time like this:
Dim lab As New Label With lab .Left = 0 : .Top = 0 .Width = 800 : .Height = 800
[code]....
This doesn't work on a child form, no label is visible. Can't see any obvious problem in quickwatch.
Updating a VB6 prog in VS2005 on Windows 7. The prog has an MDI + child forms and there are a number of content types, with varying numbers of controls being set up and positioned from setup files.On forms which are not child forms I can easily add controls at run time like this:
Dim lab As New Label With lab .Left = 0 : .Top = 0
[code]....
This doesn't work on a child form, no label is visible. Can't see any obvious problem in quickwatch. Is there some known reason for this or do I just have a wierd bug?
Does anyone know how to make the controls on an MDI Child form resize along with the form itself? I inherited a project from another developer and I was asked specifically to make the form resize. With advice I received on this forum I now have the form resizing as expected. It will minimize, restore and maximize as well as resize with the mouse pointer.
The problem is that when I increase the size of the form all I get is more blank space on the screen. The controls to do change at all. Although I thin this is normal behavior for a Windows form my bosses all seem to think that the controls resize on every other widows for they see. I wondered if anyone had successfully accomplished this. I was already advised to write a FormResize handling subroutine and this unfortunately did not work.
I have an MDI application which uses fixed sized forms. I've started to change the forms to sizeable and anchored the controls so they move when the form is resized. If the child form has a menu this jumps onto the parent menu (as it always has done) but all the controls move up the form at runtime and leave a space at the bottom of the child. If I change the form in design mode to cut through the bottom controls i.e. so the form doesn't appear tall enough, it corrects itself at runtime. Is there another workaround as it looks misleading in the designer.
I have a MDI Form that has a child form containing a text box. I want to be able to make a call to the TextBox's cut() method on the currentlly active child form. Here's what I have so far, but it is complaining about using ctrl.cut()
I have an outlook application, whenever the user receive a new mail I show him a form and some controls
The user needs to insert information and close the form. Sometimes the user is not near his machine so whenever there is a new mail I am adding new controls and modify the child size.
It has been successful using the Form.show() method but not in showdialog() i cant add controls and change the form size can someone please help on the subject?
I'm trying to create an animated screensaver using a small animated gif, and tiling it over a form in Visual Studio 2010, but I'm having trouble tiling the gif over a PictureBox First, I tried importing the gif as the Form's BackgroundImage, but the gif lost its animation.
Then I went on to importing the gif into a PictureBox, and setting the PictureBox to "Dock in parent container," to make it the same size as the form. The gif is animated inside the picture box, but its not tiled. Is there a property I am missing that can be used to tile an image over a PictureBox or do I need to write some code to tile the image?
Is there a easy way to maximize a window in VB when the maximize button is pressed so that everything that is contained in the Window (Forms, Panels) will also automatically resize to the screen size?
Having an issue with alignment in a form. On the system i designed the program on everything lines up the way it's suppose to, but i took the build executable to show an associate and nothing lined up right and looked horrible. I'm using several picture boxes to achieve the look I'm after. The issue reminded me of a resolution problem, but the resolution of the machine it was created on, were it appear the way it should and, the system of my associates were the same. The only difference was the os. I'm running xp and he was running vista...
[code] Actually,I m doing notepad application,my problem is when ever click the form maximize button automatically form is resized .. same like that my richtextbox control also maximized. this is the my scenario.
my application contained window forms,when the window form is maximizing its all text box and datagridview standing in same location and the magnified size is adding to one end...it means.the window forms lose its alignment made by me..how can i keep it looking in the same manner on the click of maximize icon
Trying to build my credits menu for a finished piece of software but I can't get the text to auto correct its self and auto align its self. Basically I want it to align its self after each cycle or rotation/tick. The text needs to be centered in the form.
Private Sub CreditCycler_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CreditCycler.Tick If Cycle = 1 Then txtTitle.Text = "Created by" txtName.Text = "UOK Software" [Code] .....
I have a MenuStrip with File > New, Open, Save, Exit located in a parent form, and a RichTextBox located in a child form.The problem I'm running into is concerned with the destination of the file elected from "Open" and the save.When a user selects their file from "Open", I need it to open the child form and put the text into the RichTextBox.I also need the program to be able to "Save" from a child form, whether it's been brought up via "New" or "Open".
I having trouble with the WindowsState Maximized Property. I have a MDI WinForm application with a number of Child forms. I setup up each Child form with the WindowsState Maximized Property in the Property screen of the VS 2008. The MDI Container form is also Maximized.When I run the application, the MDI Container opens Maximized as it should. When I try to open a Child form it opens partaly Maximized. The MenuStrip and ToolStrip are Maximized including the MenuStrip having the Close, Maximized, and Minimize controls in it. On the form, the BindingNavigator and the Form itself is the size they would be if the WindowState was Normal.If I Minimize the MDI Container form and bring it back the Child form will be fully Maximized as it should be.
I have a form with i.e 2 buttons and a webbrowser ok now how to keep these 2 buttons and a webbrowser fitting the my form when I maximize my form or minmize it using codes ?
I need to create a form in such a way that when i run it the form will open in maximize i.e,the top three box with be like the following Attachment 71929 Normally when we run a form it is in the following pattern:Attachment 71928
I tried with the maximize box but it is for enabling and disabling the maximize button.
I have a tutorial Application (in VB.NET 2005) for MS Office 2007 and have some Exercises for Users. When User clicks on given Exercise (for example: MS Excel), this Application minimize and launch related Excel file through program with Modal Form over Excel Application containing Exercise text in Label and Button to Submit the Exercise. User performs that given task and submit it by click on the given Button. This will check that file, close it and maximize the Application again for next Exercise.
My problem is When User perform the Exercise and click on Submit button, it checks the file, close it and didn't maximize the Tutorial Application all the time. Sometime it Minimize / Maximize properly, but sometime it doesn't Maximizes. (I can see it running in Task Manager)I have used the following code:
I am drawing graphics on the screen and when the form resizes it needs to clear and redraw all the graphics b/c the form is a different size and the graphics are supposed to scale with the size of the form. Well that works, but not for maximize or restore. So I had to look on the internet for how to capture the maximize and restore event. I got it from here and it does capture it, but it does all the events (such as redrawing the graphics) first and then it maximizes, which totally defeats the purpose. I tried to do Application. DoEvents but it still doesn't do it. Any way to have the graphics redraw AFTER it maximizes?
Code: Private Const SC_RESTORE As Int32 = &HF120 'When a Form is Restored Private Const SC_MINIMIZE As System.Int32 = &HF020& 'When a Form is Minimized Private Const SC_MAXIMIZE As System.Int32 = &HF030& 'When a Form is Maximized Private Const WM_SYSCOMMAND As System.Int32 = &H112 'Minimized/Maximized/Restore comes when we have this msg Const WM_NCLBUTTONDBLCLK As Int32 = &HA3 'When User Clicks on the Title Bar Protected Overrides Sub WndProc(ByRef m As Message) [Code] .....
I need to do this in the MDI: Generate Form1 to maximize the potential in MDI. And mdi form to generate second Form2 order has always been above Form1. When clicking on the form 1 form2 disappear under it. Normally, when you click on the form1 Form2 hides under it. All must appear in the MDI.
I have a form, with a lot of controls on it, and I make the form to be a mdi-form. When the application begins, the main form will show the mdi form, and maxmizes it.
My question is, the maxmize process of the mdi-form is showing to the user, that's very bad looking. We can see the mdi-form show itself on the screen with it's original size, and then change it's size to mazmize itself. During the process, it look like all the controls on the mdi-form are shining.
I want to hide the maxmize process to be not seen, and make the mdi-form visible AFTER it's Maxmize process. But I don't know how to do this.
I tried this:
Mdi-form.visible=0 in the form_load of the mdi-form, but I don't know where to do the Mdi-form.visible=1. I can't find the event of Maxmize process.
