I have a code in VB 6 but doesn't in VB.NET. Even I was converting, but, there's a thing that I can't convert because I don't know what "hProcess" means .
Look at the code below:
Quote:
Public Const PROCESS_ALL_ACCESS = &H1F0FFF
Dim f1holder As Integer
Dim timer_pos As Long
[CODE]...
The error says: Name 'hProcess' is not declared.
The simple code we have written compiles and executes fine in my class and work computers - both xp. when I try to compile the exact same code on my home windows 7 computer, I get error messages:
c:vbpayroll2.vb(17) : error BC30451: 'InputBox' is not declared. It may be inaccessible due to its protection level.
and
c:vbpayroll2.vb(20) : error BC30451: 'Convert' is not declared. It may be inaccessible due to its protection level.
Option Explicit On
Imports System
Imports Microsoft.VisualBasic
Partial Public Class _Default
[code]....
I am getting error in the sheets and iffset liness.. it says
Sheets("Sheet1").Cells.SpecialCells(xlCellTypeLastCell)Offset(1, 1).End(xlToLeft).PasteSpecial(xlPasteValues), underlined words aren't declared
I have the following error is my code;
- Name 'F' is not declared
- Name 'H' is not declared
Am trying to insert the following paths at Label1 and Label2, respectively.
Private Sub btnUnpackFolder_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnUnpackFolder.Click
Label1.Text = F:Folder (3)TestzippingutilityTestzippingutility1
[CODE]...
When converting the project from VB6 to VB.net. (All links to this classes were deleted: Microsoft.VisualBasic.Compatibility¸ Microsoft.VisualBasic Import System System.Data System.Windows.Form, using Framework 2.0)
I have this errors: Error 1 "MsgBox" not declared. It may not be available due to its protection level....RFrm.vb 1481 9 R
Error 2 "MsgBox" not declared. It may not be available due to its protection level. ...RFrm.vb 1481 135 R
Private Sub _Command4_0Microsoft.VisualBasic.Left_Click(ByVal sender As System.Object,_ByVal e As System.EventArgs) Handles _Command4_0.Click
[CODE]...
And another question, off-topic. Which operators can be replaced with VB.net operators: IsNumeric, Mid, Microsoft.VisualBasic.Left.
The function checks for the input only the digits.
With Text9
If .Text <> "-" And Not IsNumeric(.Text) Then .Text =_
Microsoft.VisualBasic.Left(.Text, .SelectionStart - 1) &_
Mid(.Text, 1 + .SelectionStart)
End With
Im trying to convert C# to vb code...but somewhere there's a fault in the c# and so this doesnt want to convert to vb
View 3 RepliesI'm converting some C# code from another project to VB.Net but the following code is throwing an error
Dim obj As System.Collections.ArrayList()
obj = HTMLWorker.ParseToList(New StreamReader("../sample.htm",encoding.Default),
styles)
The error is 'Value of type Systems.Collections.Generic.List() cannot be converted to 'Systems.Collections.Arraylist()'The original C# code is
System.Collections.ArrayList obj;
obj = HTMLWorker.ParseToList(new StreamReader("../sample.htm",Encoding.Default),
styles);
I have this code but the problem is that I get an error which says "Failed to convert parameter value from a String to a Int32." Here is the code that I am using:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim conn As New OleDb.OleDbConnection
conn.ConnectionString = "PROVIDER=Microsoft.Jet.OLEDB.4.0;Data Source = C:Documents and Settings1B09158My DocumentsUser.mdb"
conn.Open()
[CODE]...........................
I have declared some constants as double in a Class
[Code]....
I'm tryingto figure out how I can get the text box to display the value of the constant with the same name? i.e 1.54186 in the example given
my project was intially mandated to be done in c#.however a large contributor to the project wrote much of the business logic, which he knows well, in vb.net.How difficult would it be to convert the following c# code into vb.net.
[Code]...
I've run some code which extracts data from a database and presents it into a Datalist. It works fine when the script is on the aspx file, but when I transfer it to a code behind I get the following error
Compiler Error Message: BC30451: Name 'showIt' is not declared.
(showIt is the ID of the Datalist)Obviously, the Datalist markup is in my aspx page, and the script is in the code behind .vb file.As I say, it all works when the scripts are all on the one .aspx file.The code in the code behind is: (I've skipped the SQL and connection strings to keep this post concise)
Partial Public Class Data
Inherits System.Web.UI.Page
Sub Page_Load(sender As Object, e As EventArgs)
[code]....
I have a old code in VB.Now I convert it into vb.net.There is a line in a code
Dim pCParameters As Integer
pCParameters = VarPtr(Parameters)
When I execute code the error occure that
[code]......
How can you use XML that you have declared within your code? Also, what is the correct way to put it in your code?
View 6 RepliesI have written some encryption software and I am getting an error from this piece of code The error is - Name 'it' is not declared
Imports System.IO
Imports System.Text
Imports System.Security.Cryptography
Public Class Form1
[code]....
The program is simple enough, I load a file I want to encrypt, type in a password to the password box and click the encrypt button.
Protected Sub btnadd_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnadd.Click
Dim c As New StoredProcedure
Dim result As String
[code]....
Chr(34) : Chr is not declared error message
View 3 RepliesI have a simple IF THEN ELSE block which checks for the presence of a querystring and then checks if it is set. The idea is that if no querystring, the form is empty and people can enter a new form. If there is a querystring and it isn't blank, a db query for the form data occurs, fields are populated and a user can update the form.
so here is my code block.
Dim strQueryStingCheck As String
If Not (Request.QueryString("pid") Is Nothing) Then ' is there a querystring?
If Request.QueryString("pid").ToString <> "" Then ' does it have a value?
[code]....
I am getting the "Variable is not declared; it may be inaccessible due to its protection level" for strQueryStringCheck ONLY on the Else code block - that is when I set strQueryStringCheck to "e". I can't figure it out.I've looked at other posts, particularly this one. and it was helpful. I can make the error go away, but I want to understand why I am getting it in the first place. I declared it within the subroutine. And if I was doing something wrong, shouldn't it throw an error on BOTH blocks of the IF THEN ELSE block? It doesn't when I set strQueryStringCheck to "u". Why only in the ELSE block?
Here is my form code
Dim asInteger As Integer = 42
Dim aSingle As Single = 39.345677653
Dim Astring As String = "I like Candy"
Dim aBoolean As Boolean = True
[code]....
and im getting an error saying anInteger is not declared. Could anyone give me some help to why this is happening and also how it is fixed and give me some information so i can understand why it is not working so i no for future reference. Just reading back over my code i have realized i put
Dim asInteger As Integer = 42
instead of
Dim anInteger As Integer = 42
I am getting the error: "Name 'GlobalScope' is not declared" and have not been very successful researching online or in books. I am getting this error on line: GlobalScope.BasicLibraries.LoadLibrary("Tools") I am Using a code i found online
'Opens a Open File Dialog to allow the end user to select a file to import into the program.
'This code is from Andrew Pitonyak's free Useful Macros book
Dim fOpenFile As String
Dim oFileDialog As Object
[Code]....
I have a simple label in ASP.NET. I want to set text to it in VB.NET. The id for the label is norecords. The VB.NET code is like this: lblnorecords.Text = "No Record found".
However, it gives me error saying: name norecord is not declared.
I am trying to replicate this example of calling IronPython code from VB.net. I've downloaded and installed IronPython and created a VB.net console application. I added references to all of the dlls in the IronPython installation folder:
IronPython
IronPython.Modules
IronPythonTest
Microsoft.Scripting.ExtensionAttribute
Microsoft.Scripting
Microsoft.Scripting.Core
[Code] .....
I receive the error "Name 'PythonEngine' is not declared."
I can't seem to find PythonEngine when I search the ObjectBrowser. Is the example out of date or do I have an error?
I am trying to connect to his PC and receive data at an IP address. I think I have sussed Winstock However, im having problems with this command:
If AxWinsock1.OcxState <> sckClosed Then 'If Winsock is not closed
AxWinsock1.Close() 'Then Close the Connetion
AxWinsock1.Accept(RequestID)
The error is to do with the underlined sckclosed command and the error reads
"sckClosed' is not declared"
my understanding is this is a standard command. I have tried declaring it in various ways and nothing has worked. I am using Visual studio 2005. Does it support it ?
I am trying to bind a few values in xaml to variables declared in the code behind.
e.g.
vb.net
dim test as integer = 2
[code]....
I cannot figure out what is wrong with my code. Yes I understand its giving me 4 error messages about visual basic 2010 Express seeing some of my variables as undeclared. Below is the code.
[Code]...
I have a MVC3 application which uses Devexpress controls.My first page works fine, but this is not strongly typed.I get the error "BC30451: 'ViewData' is not declared. It may be inaccessible due to its protection level" on my second page which starts with:
@ModelType IEnumerable(Of MyModel.XXX)
@Code
ViewBag.Title = "Index"
[code].....
Error Message = Name 'NumOfMale' is not declared
Name 'NumOfFemale' is not declared
The not declared error is in the messagebox.show area they are declared OK before that.
Private Sub btnEx4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnEx4.Click
For i = 1 To 20
Dim gender As String
[code].....
I am trying to run this line of code: Dim OrderedFiles() As String = Directory.GetFiles(FilePath).OrderBy(x >= x.CreationTime)
I get an error on x saying x is not declared. I have my project set to Option Strict Off and Option Infer On. If I turn ON Option Strict then I get thousands of errors from the project(it is inherited) and I don't have the time to fix all of them, but x no longer gives me an error. I have googled until I want to throw my computer out the window.
I was hoping for a more elegant solution but here is what I came up with to solve this particular problem.
[Code]...
It is not particularly elegant but it does the job. I was hoping for a one liner LINQ solution and I just don't have the background in LINQ to know how to do the job, time to go buy a book.
i am creating project using Console Application . In this project i have class car and Module1. I also declared Public Color as string in Car class. In module1 i set the color property for this objectcar.The probleam is i still get an error Name 'red' is not declared. i also highlight line which give me this error.
Module Module1
Sub Main()
Dim objcar As New Car
objcar.Color = red
[code]....
This timer code is for VB6 and worked fine, It's to change the timer seconds into minutes, I'm not sure how to make this work for 2008 though.
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Interval = 1000 ' set timer to 1 sec intervals.
Timer1.Enabled = False ' timer is off
End Sub
[code]....
the errors are...
Error1Name 'StartTime' is not declared.
Error2Name 'MinutesToWait' is not declared.
Error3Name 'StartTime' is not declared.
I am working on my new server now. I have created very simple page which has a for loop on code behind. If i dont define "i" as integer before the loop, i got this error
Compiler Error Message: BC30451: Name 'i' is not declared.
But, i can use for loops without declaration of "i" before loop.
For i = 1 To 10
Response.Write(DateTime.Now.ToString)
Next