I get a return value from a web service in minutes, for example 538 minutes. I need to break this down in hours and minutes. What is the fastest way, in .net code and also VB6 code (two apps use the service) to convert this from minutes to HH:mm?
View 6 RepliesHow to get the total minutes in an hour?
Example:
1 Hour and 20 Minutes.
I need to get the result at 80 Minutes.
I am looking for formula that is accurate in converting Minutes to Decimal Minutes i.e 30 minutes is 50 Minutes in Decimals so 1.3 hours is 1.50 and not 1.5 i have used Minutes/60 but it is not accurate as some times i have to Multiply the result by 100 and some time 1000 to get correct results based on single digit Try 1/60, 10/60 99/60 or 100/60.What would be the most efficient and correct way to Convert the time into Minutes ?
View 10 RepliesI have this homework assignment where we have to create a pay calculator where you would enter the total minutes worked and the hourly pay rate. and then i have to create the code to show what the total weekly pay would be. I have to display the Hours Worked: and the Leftover minutes: I also know that the formula to calculate the weekly pay is totalMinutesWorked / 60 = hoursWorked and i have to use the Mod operator. [code]
View 2 Repliesi just started usign Vb two days ago, as it was required for work and i just wondered how to change the format of the total into a money format
View 3 RepliesI am using the following code to display a timer. I have no use for the hours, is it possible to format the string to show only MM:SS? Me.lblTime.Text = String.Format("{0}:{1:d2}:{2:d2}", remainingTime.Hours, remainingTime.Minutes, remainingTime.Seconds)
View 5 RepliesIn order to pass on the right time to my access database i need to format a text box so the values entered are read as minutes.
View 1 RepliesI have a string wich contains a value (let's say 22:30 for example)I need a function wich convert 22:30 to an integer that is equal with total number of minutes in 22 hours and 30 minutes.
View 15 RepliesI use a masked textbox, and I would control the input, the problem is, I use 1 textbox and the control should on the first 2 digits with a maximum of 24 and the last 2 digits with a maximum of 60. Is there a possibility to program this?
View 1 RepliesI am working on a timekeeping application in VB 2008 and need to show elapsed time in hours and minutes. I have no problem eliminating seconds but if the hours exceed 24 the time is displayed as days.hours:minutes and what I need is to show (for instance) 30 hours and 15 minutes as 30:15 not 1.6:15
Is there a better way then using code like:
strHours = (TimeSpan.Days * 24) + TimeSpan.Hours
strMinutes = TimeSpan.Minutes
strTotalTime = strHours & ":" & strMinutes
if i'm bring in numbers as seconds. How do I convert those into minutes and seconds.
For instance, I have these seconds:
15
34
55
68
[Code]...
i am working on a time limiter application, and i need to work out how to convert a time i.e. 01:19:15 into minutes.
View 2 Repliesim using ms visual studio 2005- vb.net (im a new beginner too)how can i convert decimal result into hour,minutes,seconds? i have degrees result --> i already convert to decimal --> now i need to convert the decimal into hours.i use this formula-degree into decimal (just a notes-im try use calculator)[code]
View 6 RepliesPreviously I converted a string with year, month, day and minutes/seconds using
CDateTime(conYear, conMonth, conDay, conHour, conMinute, conSecond)
This code will no longer work in VB.net and I cannot figure out how to do this with 2005 VS. The string originally is something like "20100310142715" and should be broken down into year, month, day, hour, minute, second.
Im looking for a class or code in VB.NET that can convert a black and white image in JPEG format to a grayscale TIFF format.
View 2 RepliesI im trying to set a time so that the user of my quiz has to do their 20 questions in 40 minutes. i actually have a few questions about the timer. How do you make it so that you canrun this same timer over everyform and then make it stop on the last form? is it possible for you to convert the timer so that instead of it running in milliseconds it runs in minutes?
View 4 RepliesHow to convert jpg format into binary format using VB code ?
View 3 RepliesAll of my regional settings in control panel are set to UK but when I retrieve a date from an SQL database (run from my PC) in my program, it appears in the MM-DD-YYYY format rather than the DD-MM-YYYY format that I expect.
After a bit of troubleshooting I found that this is because of the fact that SQL server always stores its dates in that format - so then when my program reads the data from the database it interprets it as being the US format.How can I convert this to UK format bearing in mind I am working with Date objects not strings?
How to convert eps format to jpg images in VB.NET?
View 3 RepliesHow do I code the total cost to give me a pound sign with the total cost at the moment when the total comes up for an example it gives me 3.6 when I need it to show £3.60 here is the code I have so far. [code]
View 2 RepliesMyRow = MyDT.NewRow()
MyRow(1) = rs2.Fields("Field29").Value.ToString
rs2.Fields("Field29").Value has values like "YYYYMMDD" in a string.how can i convert a "YYYYMMDD" string to a needed date format like 'dd mmm yy' (or any format)
I would like to convert 12H to 24H format. I have for example: 06:11:11 PM and I need to convert it so I can see 18:11:11 in VB.net.
View 4 Repliesanyone how to Convert a .DWG Format File to PDF Automatically in VB.NET.
View 6 RepliesThe pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
I am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
I want give a date from user to string Such as "2011-10-11" and for example my system date format is : dd/mm/YYYY
How can i convert 2011-10-11 To Default System Date Format ( In My Example : 11/10/2011 )
40469.55139
40469.63333
40471.49792
[code].....
these are dates. They have been given to me by data dump into and xls. I am reading in the values into my app and need to run date calculations on them.
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('50a20615dc044866b18b3cab643fdc42')
I have this date format yy/MM/dd HH:mm:ss ex: 12/02/21 10:56:09. The problem is, when i try to convert it to different format using this code: CDate("12/02/21 10:56:09").ToString("MMM. dd, yyyy HH:mm:ss") It displays Dec. 12, 2021 10:56:09. How can i correctly format it to: Feb. 21, 2012 10:56:09? This format is returned when i check balance inquiry fro my SMS based application.
View 4 RepliesThe input of strings is in 1 of 4 formats.
How to convert the following strings:
"0"
"00"
"0.0"
"0.00"
to: "00.00"?
How can we convert any image to any other format e.g BMP to Jpg or emf.I am able to convert only bmp to some of these format by using this code which i found.
[Codie].....