Ok i need to create a program that lets the user open a text document and lets him do the following. This is with Visual Basics 2008.
Count Characters
Count Lines
Count Words
Count All
I don't know how to get my program to count just individual words and i have no idea how to get it to do all 3.
[Code]...
I have to create an application that lets a user enter as much grades he wants. The grades are between 0 and 100 and they can't be negative. Whenever the user type -1, the application is done and it shows the average of the grades, the lowest and the highest grades.I absolutly have no idea where to start but i must be using loop/do/while.
View 4 RepliesI need to create a console application that lets a user enter 20 names and then it sorts them out alphabetically in order and then displays them.
Module Module1
Sub Main()
Const names As Integer = 20
Dim index As Integer
[code]....
I've got a VB.Net form application that dynamically loads user controls based on which navigation link the user clicks on. I'd like to make it easier to use at Design time by putting a link of some sort to open the User Control at design time. The link would go onto the form in the space where the User Control will be going. This just saves a little time from having to browse through the files to open the correct file.
View 2 RepliesHow do you open a document as another user? The document type is unkown (could be pdf, .xls, .doc, images etc). Document is on a network share, username, domain and password are all known.
I have thoroughly researched this question and I do not beleive the question has been answered here. Please prove me wrong. This question gets close Open a shared file under another user and domain?
But unfortunately it opens the file to a filestream, I need to open the file in its associated application.
I have a function on my program that allows a user to load a listbox filled with words that are matched with words inside a databank. The databank is filled with 2 string arrays and file of .jpg Pictures. The Arrays attached to each word inside the listbox are approximately one page. Each page is two paragraphs of Text(string Array) and one Picture(20Kbytes).My problem is this. When the user selects the option print all, the listbox with approximately 10255 words is selected and begins to fill a Microsoft Word Document.Because the alotted amount of space needed for the MS Word Document is approximately 5 Gbytes,I need to open about 10 Documents and insert the String Array's and Pictures into each document one at a time.Is there anyway to check the filesize of the Open Document before saving the document.This way I could check the open document inside the algorithm for 512 Mbytes of memory and save the document before the size gets above 512 Mbytes.[code]
View 2 RepliesI'm trying to make a program that lets you type "A" in a text box then it plays an audio file.
My code is: If MaskedTextBox1.Text = ("A") Then
How to open a word document in vb.net.needs to add any reference file.
View 1 RepliesBasically I need to make a program that lets a user browse and choose a folder, then I need a box that the user can then select the files to work with, then with the selected files I need to put them into a zip file. I'm trying to use a list view box but having all kinds of problems using the data in it.
View 2 RepliesSo basically i need to make a loop that only lets the user click it ten times then gives the answer to them.i was gonna use a DO loop that looks like this so far.
Dim counter as integer
counter = 0
Do until counter = 10
loop
and after that i'm kinda lost on what to do, i know that its needs to be if you click btnenter 10 times give the right answer and then your done.
I'm new in multi agent system...I have been assigned to do a project by using agent.The problem is how to create an agent that can check either the document submitted by user is relevent to the topic have been set by the administrator
View 1 RepliesI have a little situation and i am not sure of the best way to do it.
- My program lets the user select a folder
- From that folder i need to select all .png files
- One by one i need to load them into a picture box, await a button press and then go to the next image.
The above that i have typed in red is where im not sure what to do. The other steps i can do.
I've made a small game that lets the user move a picturebox around with arrowkeys. The monster picturebox is moved towards the player and keeps growing while you are "alive". If it touches you, you lose.
How to improve my code. Im the worst ever at OOP programming. The main reason is i dont understand how i can pass variables between subs/functions e.t.c. I've read up on overloading operators but i dont feel that i can grasp it. If someone has any comments or any simple examples on improving my ability i wouldnt mind hearing them ^^
This is what i have now. Attached project (with "graphics") without .exe files and all code is also below. Also an image of what it looks like below.
CODE:
I am trying to create a page where a user can type a document and have it be bold italic or underlined. When the user clicks on bold and italic it should be bold and italic. when they are not clicked it should not be. I am having trouble finding a stable solution. I can only seem to change it to either bold or not bold or italic or not italic and not bold and italic.
View 10 RepliesIs there any way to create a web browser that hides your IP address and pretty much lets you surf the internet anonymously?
View 2 RepliesHow do i create a pdf document in vb.net? which references must i add for my project to be able to create a pdf document? Does vb have it's own iText if yes how can i download it and where?
View 1 RepliesI'm trying to make a Doctor's program where the doctor has to enter the patients detail into several text boxes (Name, Age, Address...). So, after he has entered all the information, he would want to save it somehow so he could open up the information
again. How would i do that. I thought it could be saved in a database, or even in a text file.
I want to access (read/write) the user entered text for a document.The document text is housed inside a CONTENTEDITABLE DIV tag within a html document.The html document is loaded into the webbrowser object (webbrowser.navigate(path and filename)).When the html document (bulletin.htm) loads,An error is popped up such as ACCESS DENIED to toolbar.htc and menu.htc And the toolbar and menubar are missing or corrupted.I have tried to generate the code for the document using the code below.
Function ScriptEditorHeader() As String
Dim sBuf As String = Nothing
sBuf = ""
sBuf = sBuf & "<html "
[code]....
I got a textbox with lets say 3 rows of text
1.Hello
2.My name is
3.Simon
And i got a listview that is on detailed...When i press a button: for each row listview item add.So the listview items will be 3 items, 1 item per row in the textbox thats on multiline.
Iv tied;
Dim file As String
Dim saveLocation As System.IO.FileStream
[code].....
I believe I need the code for Load Event. I have tried many ideas. I have searched the threads here and also google of course. No luck as of yet. Better description: I have a file named hello.txt. The contents of this text file are "hello". I use my program as the default for .txt files. I dbl click hello.txt. My program loads and the contents are blank and it should have "hello" in it.
View 31 RepliesIs it possible to declare a variable using the text of, lets say a string, as the name?If u dont get it im looking for something like;Dim Var + string1 As PictureBox..In the code "Var" is the start of the name and "string1" is the end of it so if string1 was "Hello", the picturebox would have been named VarHello.
View 2 RepliesI am trying to get my program to Read all the text from a txt document saved on my computer?
Dim fileReader As String
fileReader = My.Computer.FileSystem.ReadAllText("C:Documents and SettingsOwnerMy DocumentsWord List")
What is going wrong is that when I try it it says that my access to that folder is denied for some reason. Also, how would I make it read each of the word in the file 1 at a time?
I want to create a small application in VB.Net which will zip the file such that when user will unzip this file, a url will be opened in user's default browser. Is there any way to create such files?
View 4 RepliesI'm trying to make an autoshutdown, that can, of course, shutdown your computer but also open a program when you want (I'm working with vb 2008 btw), I was thinking in using openfiledialog, get the path to a text box and then open the file with shell.
View 2 RepliesOpen a pdf file with user password in vb 2008
View 6 RepliesIs it possible to restrict a user from opening a sub folder like "permission denied" message should display while trying to open the folder. If yes, help me to solve this using vb.net in winform as well as using vb.net in asp.net
View 3 RepliesI have a notify icon that uses balloons t notify the user of certain events. In some circumstances I would like to open a file or program when the user clicks on the balloon. The default behavior is to close when the user clicks the balloon. How can change this?
View 1 RepliesWhere can I find information on how to use XPS Document Writer to create a Word or Adobe document?I can print my VB2008 print document to a file, but how do i convert this file to Word?
View 1 RepliesI am currently working on a program, that you enter certain values/text in and it organises it into a word document automatically,
I found a code online, which has worked a treat, However I'm wondering what lines of code I would need to:
1. Add Bullets or Numbers
2. Add a new line of text (I can add a new paragraph but I don't want a huge space between the two lines)
3. I have around 20 check box's is there a quicker way to check which are selected then write the text in word or do I have to write alot of If Checkbox1.Checked = True then, etc)