I have to create an application that lets a user enter as much grades he wants. The grades are between 0 and 100 and they can't be negative. Whenever the user type -1, the application is done and it shows the average of the grades, the lowest and the highest grades.I absolutly have no idea where to start but i must be using loop/do/while.
View 4 RepliesI need to create a console application that lets a user enter 20 names and then it sorts them out alphabetically in order and then displays them.
Module Module1
Sub Main()
Const names As Integer = 20
Dim index As Integer
[code]....
For a class assignment I created an application that takes grades from the user via input box and adds them to an array called grades. Here is some of the code.
vb.net
Option Strict On
Option Explicit On
Option Infer Off
[Code]...
My problem is that the variable x is an integer and the user input from the InputBox is a string so I get the error: "Option Strict On disallows implicit conversion from 'String' to 'Integer'.I've already submitted this assignment with out the first three lines of code (which allows the code to run flawlessly), but I would like to know how to get around the error while still using the Option Strict On parameter. I am aware of the ToString method but I am not sure of how to use it here or even if it will work here. I've tried to use in a few variations but none worked.
I need to create a small application that will force a user to enter an even number but i MUST use a loop. Here's what i've come up with:
Quote:
Dim bynombrepair As Byte
bynombrepair = InputBox("Entrez un nombre pair")
If bynombrepair Mod 2 = 0 Then
[Code]....
I am a new user to VB and I am having difficulty with one of my assignments. The assignment states that to create an application that allows a user to enter three test scores each for three students. The application should calculate each student's average test score and assign a letter grade. The application should prompt the user for each student's name and three test scores.
[Code]...
i'm having a bit of a hard time on setting up the calculations.There are three seating categories at a stadium. For a baseball game, Class A seats cost $15, Class B seats cost $12, and Class C seats cost $9. Create an application that allows the user to enter the number of tickets sold for each class and the total revenue.
View 3 RepliesOk i need to create a program that lets the user open a text document and lets him do the following. This is with Visual Basics 2008.
Count Characters
Count Lines
Count Words
Count All
I don't know how to get my program to count just individual words and i have no idea how to get it to do all 3.
[Code]...
I have to create an application that prompts the user to enter today's sales for five stores. The program should then display a simple bar graph comparing each store's sales. Create each bar in the bar graph by displaying a row of asterisks (*) in a list box. Each asterisk in a bar represents $100 in sales. I have to make two different versions of this program. One using a "do while ... loop" and the other using a "for ... next loop". Could someone give me a hint on how to do this. I the "do while ... loop" version and I have had some problems, especially with converting the numbers to asterisks.
Private Sub btnDisplay_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplay.Click
'Clear everything
[code]....
this is my first vb. and i have assignment and i have been trying for hours but i couldn't do it right I have to create an application that prompts the user to enter today's sales for five stores. Create a loop to prompt for an amount for the first store using an inputbox and do not exit until you have good data. The inputs cannot be negative or greater than 5000, but may contain decimal values. The program should then display a simple bar graph corresponding to the amount of sales using a row of asterisks (*) in a listbox. Each asterisk represents $100 in sales. Display the total of all the stores by looping this process for each store.
[Code]...
I have a little situation and i am not sure of the best way to do it.
- My program lets the user select a folder
- From that folder i need to select all .png files
- One by one i need to load them into a picture box, await a button press and then go to the next image.
The above that i have typed in red is where im not sure what to do. The other steps i can do.
[Code]...
I need some trick to make some good and safe "Login" to application system with username and password.
5. Create a program which will allow the user enter ten numbers. The program is to count how many numbers were above 50?
View 1 RepliesIt is meant to average 15 user-input grades and then from there I have to provide the letter grade that corresponds with the average percent. I understand how to provide the corresponding letter grade, but I don't understand how to get the average. I've tried putting it into arraylist format
View 4 RepliesBasically I need to make a program that lets a user browse and choose a folder, then I need a box that the user can then select the files to work with, then with the selected files I need to put them into a zip file. I'm trying to use a list view box but having all kinds of problems using the data in it.
View 2 RepliesI have to create a program that ask the user to enter the amount of hours work for 5 diferent projects in textboxes. The user have to enter the time he worked in minutes. Ex: 153, 280, 600, 130, 20... The total then is out putted into a textbox in this format "13 Hours and 35 Minutes" I'm having dificulties making the conversion and the separation from hours and minutes. I understand that the total is divided by 60, but if we fallow the above numbers the total hours comes out to 1183 / 60 = 19.71. So I'm having problems with the .71 mnts or digits... so from this total I have to output the total of in this particular format: "19 Hours and ?
View 2 RepliesI currently have a program that allows users to download files into a folder of there choice. I currently have 10 different forms all with a text box to show folder location and a browse button for user to find it, but what I want to do is create a form that will appear at the start where the end user can enter the folder location so that they don't have to enter the folder path for every download they want to do. How would I go about doing this I have a textbox, browse button and an OK button but have no idea what to do next.
View 1 RepliesSo basically i need to make a loop that only lets the user click it ten times then gives the answer to them.i was gonna use a DO loop that looks like this so far.
Dim counter as integer
counter = 0
Do until counter = 10
loop
and after that i'm kinda lost on what to do, i know that its needs to be if you click btnenter 10 times give the right answer and then your done.
could anyone please help me with this1.Create a simple Times Table program which will allow the user to enter an integer value n (between 1 and 20) into a textbox. On the click of a button output to a label the n times tables. Use a For Next loop to perform the repetition.i can output them to a list box but only last one to a label ive been stuck for 3 days.
View 8 RepliesI am creating an application which requires user to enter some data using popup. There will be text boxes and drop down list which will be filled by the user. Once the user fills the required information and submits it using a button, the popup will dissapear. Can anyone direct me how to use Popup control to contain textbox, drop down list and buttons.
View 1 RepliesCreate a program which promps the user to enter an unlimited number of test scores. The program should show the high score and the low score. You should use a loop of your choice within this program. The program should look similar to the one below:
View 3 RepliesI would like to make an application whereby the user can select a color, enter a character into a textbox, select another color, enter another character and so on and so on...This multi colored text that has been entered into the textbox by the user must then be shown on a label. I cant get the damn characters in the label different colors They are all for example, either red or all blue.
View 2 RepliesI've made a small game that lets the user move a picturebox around with arrowkeys. The monster picturebox is moved towards the player and keeps growing while you are "alive". If it touches you, you lose.
How to improve my code. Im the worst ever at OOP programming. The main reason is i dont understand how i can pass variables between subs/functions e.t.c. I've read up on overloading operators but i dont feel that i can grasp it. If someone has any comments or any simple examples on improving my ability i wouldnt mind hearing them ^^
This is what i have now. Attached project (with "graphics") without .exe files and all code is also below. Also an image of what it looks like below.
CODE:
Is there any way to create a web browser that hides your IP address and pretty much lets you surf the internet anonymously?
View 2 RepliesI just want to alert when user hit "enter" key.
I tried this one in keyup event,
If e.KeyCode = Keys.Enter Then
MsgBox("msg")
End If
It didnt work, is that wrong ?
Create an application that allows the user to select or enter into a combo box the number of days a person will work, and calculates the total amount of pay she will receive over that period of time. Salary is one penny the first day, two pennies the second day, four pennies the third say, and continuing to double each day.
The combo box must list the following items: 30, 180, 365, and 1000. Must be the default drop down box. Use a validating event procedure on the combo box.
The program should go through a loop once for each day, doubling the number of pennies with each iteration of the loop. You will need a running totl of the number of pennies that you add to with each iteration. To calculate the total amount of pay, multiply the total number of pennies by .01 and show the result in currency format.
Public Class Form1
Private Sub ComboBox1_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ComboBox1.SelectedIndexChanged
[CODE]...
I started learning vb 2010 over the internet for about an a week and got stuck on this assignment that I got from the internet
1.Add one textbox so the user can enter a distance measured in feet. Add labels as needed.
2.Add a button control which when clicked is converts the feet to meters (1 foot = 0.3048 meters), accepting floating point values and preserving them (no integer conversions) and display the output as shown next. 1 Points
3.Display the conversion result using a MessageBox (not msgbox) using this format: x feet is y meters, where x is the value entered and y is the result of the conversion to meters with up to 2 decimal places only. Then show an extra line of "Would you like to start another distance conversion?" and make the No button the default in the message popup and display the question icon.
4. If the user chooses Yes, cleanup the controls as in the Reset button. 0.5 Point
5.If the user clicks no, ask in another MessageBox if the user wants to quit.
6.If the user chooses to quit, close the window, otherwise no action is required.
I am trying to create a macro to enter data in a label printing application for hundreds of labels- I use an external third party software that's not very user friendly. It has several fields that accept text. The problem is, manually entering the data and clicking "print" each time is very time consuming. Can anyone suggest a way to put a line of text in the field, printing, and repeating the process?
View 15 Replies"I need to create a program that will allow the user to enter in 10 test grades from a class. I need to store these grades into an array, and use a loop to add up the total. Then I'll need to output the average, and the letter grade for the average using:
90 - 100 A
80 - 89 B
70 - 79 C
60 - 69 D
Below 60 F"
That's all it needs to do. Here is some code that shows you that the only thing I know how to do is (allow the user to enter in 10 test grades from a class.) The rest I'm so lost on and have a crappy instructor. This assignment is due tomorrow, but the instructor is not available over the weekend.
Here is my This is all I have:
Dim MyNumbers(9) As Integer
Dim Total As Integer
Dim i As Integer
[Code]....
how to create an error message by message box to tell the user to enter a number only if they key in a character value?
I MEAN AFTER THEY PRESS THE CALCULATE BUTTON
Private Sub btnCalcFat_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalcFat.Click
Dim intFat As Integer
intFat = Integer.Parse(txtFat.Text)
lblResultDisplay.Text = txtFat.Text * 9
End Sub
My text box is call txtFat
I have a button named button1 on form 1 I want it so when I click this button1 it will automatically make another form say form2 with say I dunno a textbox1 on this form2. The reason for this is because I want to make an application which will allow a user to create a form with certain things on it (what ever they choose).
View 6 Replies