I am trying to create a page where a user can type a document and have it be bold italic or underlined. When the user clicks on bold and italic it should be bold and italic. when they are not clicked it should not be. I am having trouble finding a stable solution. I can only seem to change it to either bold or not bold or italic or not italic and not bold and italic.
View 10 Replies
When I try and bold two different fonts at the same time, it won't work. Is there any way I can do this like it works in a Font Dialog? Here's my code:
Code:
Try
If RichTextBox1.SelectionFont.Bold = True Then
[code].....
I hav written some code for creating bold, italic , underline text in rtb but its not working for text consisting of multiple font.[code]where frmDocument is the child form containing rtb and text1 is rtb. What is the problem?
View 11 RepliesCan we able to format BOLD and ITALIC to the same text?
View 1 RepliesRTB.text (or .rtf) = "Some text" & "some bold text" & TextBoxA.text & BoldTextBoxB.text.
How to I make "some bold text" bold and the text in "BoldTextBoxB" bold when it goes into my RTB?
I need bold, italic, and underline, but would prefer a general solution.
I have created a page where I can toggle the richtextbox's fontstyle between bold/italic/underline. This works flawlessly. However, when I assign it more than one font style I do not know how to tell which ones it has through code. For instance if I bold something I can simply check richtextbox.SelectionFont.Bold but what about if it is bold and italic?
View 2 Repliesi am using the following code to resize text.all you have to do is hold the Shift key down and scroll the MouseWheel either up or down..[code]i cannot seem to figure out, is how to keep the font options that were previously set ex.if i set a word to bold, italic, or underline, and use my shift + mousewheel to resize all or just selected text, all the options are reset to default, meaning, no options as previously selected..
View 7 Repliesi have a RTB in my application for notes. Ive put it in a panel with a toolstrip and buttons for bold, italic, underline etc.This works fine,
[Code]...
I need to display my text which were read from .xml database as color, italic, bold, etc. in richtextbox, how do i make a code to do that,The reading and displaying is fine, but when certain word like again is read it should display in italic, and whenever a word like over is read it should be display in bold or underline etc.I use vb.net 2003 and .xml for the database.
View 1 RepliesI have a data in access 2007 which is:
table1
ID DOCUMENTNAME PAGE
1 investment 2000 12
2 investment 1989 4
3 investment march 15
how to display the id and page when user typing the document name in combobox..using vb.net 2008
Im Trying to Set up a Create User page and a Log in page. both pages are on a different Form in Visual Basic so far i have;
Code:
Imports System.IO
Public Class SecondForm
[code].....
Ok i need to create a program that lets the user open a text document and lets him do the following. This is with Visual Basics 2008.
Count Characters
Count Lines
Count Words
Count All
I don't know how to get my program to count just individual words and i have no idea how to get it to do all 3.
[Code]...
I'm new in multi agent system...I have been assigned to do a project by using agent.The problem is how to create an agent that can check either the document submitted by user is relevent to the topic have been set by the administrator
View 1 RepliesI have a form that has 35 checkboxes. I would like to change the font to bold if the box is checked to make it stand out in the document.
View 12 RepliesI work with C# 99% of the time. However, I'm having to update some legacy VB.Net code and encountering an issue with VB.Net code syntax. The error that I get is "ByRef" is underlined and "Expected Expression" tag shows up when you hover over "ByRef". The "FooDetail.Load" function is written in C# and expects a List object passed as reference. Don't have any trouble using the same function in other C# classes. Can someone indicate what is wrong with below VB.Net code.
Dim FooDetail As New clsFooDetail()
FooDetail.FooID = FooID
Dim lstFooDetail As New List(Of clsFooDetail)
FooDetail.Load(ConnectionString, "Stored Procedure", ByRef lstFooDetail as System.Collection.List(Of(clsFooDetail))
I want to create a page that allows a user to upload a file directly to my ftp server. For some reason when I run the code and try to upload a file I get:
ERROR: Could not find file 'C:Documents and SettingsuserMy DocumentsVisual Studio 2010ProjectsASP.NETuploadASP.NETuploadfile.txt This is not where the file is located. I am fairly new to .NET programming so I may have done some things incorrectly.
Here is my code:
If FileUpload1.HasFile Then
Dim fileExt As String
fileExt = System.IO.Path.GetExtension(FileUpload1.FileName)
fileExt = fileExt.ToLower
[code]....
Is there any way of hiding the tab page headers without having to create a new user control?
View 2 Repliesim trying to create a program where the user will type in a number then choose the units its in and units it will be converted to from 2 comboboxes. The output should be changing as different units are clicked without a button.
Public Class Convert
Sub Calculate()
Dim Unit1 As Double = (ComboBox1.SelectedItem)
[Code].....
I am trying to create a vertical progressbar type user control.
I want to be able to set the max / min of the progressbar as well as setting the value
But the thing I want is able to have green at the bottom fading into red up the top like in this image: [URL]
But I don�t know how or where to start.
Is there a custom progressbar I can use?
This code was intended to split a long text file into pages based on the calculations of lines_per_page.The code only prints one page of a three page document.But a very strange thing happens if I click print a second time the message box which shows "Document 1 Page X of XX goes crazy up to 100 pages until I click cancel.The code compiles fine, just doesn't function as intended. [code]
View 1 RepliesCan anyone help me to break down the instructions for this assignment.Create an application that allows the user to type in a 32 bit number using the binary system, and convert that number into the decimal numbering system.For example, the user types 000000000000 0010 (where there are 30 leading 0's, 1 then 0 from left to right), and the output would be 2.The user will type a string that is 32 characters in length.A For loop 'reads' each character using the x.substring(i,1) where i is the current character we are reading and 1 means one character only,and x is the entry the user typed (use a Textbox to get the entry but Inputbox is also ok).When you start at the first character (from the right) then that value is to be * 2 ^ 0 then the second character is to be * 2 ^ 1, then the third character is * 2 ^ 2, hence:( x.substring(i,1) converted to Integer ) * 2 ^ j represents the decimal value of the current number (0 or 1) we are reading.A variable is needed to accumulate all those values.After the loop is done, display the accumulated value.To test this code on a simple version, enter a 4 digit binary number, where 0010 is decimal 2, 0110 is decimal 6, 0111 is 7, and 1000 is 8.
My understanding is the user must enter 32 digits into a textbox. The textbox should place limitations that only allow the digits "0" and "1". This error could be displayed to the user with a messagebox that then asks to reset the value orginally inputted into the textbox. My understanding is I should continue creating the formula of the position of each character where the third character is *2^2, fourth is *2^3, fifth is *2^4 and so on? I don't understand the formula and how it works.
Is it possible to create a user control with a list of custom class type property? If it is, how can I? The issue is that, in designer mode the property is not displayed in property window. I can add the list on markup but when i switch to the designer mode it gives an error which is 'The user control does not have a public property named BookList'.
View 1 RepliesWhere can I find information on how to use XPS Document Writer to create a Word or Adobe document?I can print my VB2008 print document to a file, but how do i convert this file to Word?
View 1 RepliesHOw can i create a font that is "BOLD" as well as "UNDERLINE"?
View 2 RepliesI'm trying to retrieve a custom Attribute set on a page's class from inside the MasterPage. Normally to do this I would need to reflect directly on the specific class, but inside the Master page it's always referred to as the Page type (the parent class). How do I determine the specific type of the Page property?
Here's an example of what I'm trying to do:
Dim attrs() As Object = Page.GetType().GetCustomAttributes(GetType(MyCustomAttribute), False)
For Each attr As MyCustomAttribute In attrs
' Do something '
Next
but it only ever returns the attributes attached to the actual Page class.
I'd rather not have to derive a new base type from Page if I can avoid it.
Here is how my class is defined (in the code-behind):<MyCustom()> _Partial Class PageClass Am I defining this in the wrong place?
I am writing a scripting language which used .net for execution. Now I have written a function which accepts an object and return a set of numeric values. I wanted user to pass any numeric array (e.g. integer,single,double,long) and I could return values in that format. I mean user can retrieve value in any numeric array type rather than specifying an array type. E.g.
[Code]...
Ok, what I would like to be able to do seems simple enough. I would like to be able to create an Excel document with a series of columns that contain data to import into Visual Basic 2008
[Code]...
I need to be able to create an xml document given that the format is specified in a given xsd document and the data is in a dataset. Is there an easy way to do this in Visual Studio or Access 2007 or will this require writing out the xml document one item at a time to match the xsd?
View 4 RepliesFirst off...I am as green as it gets with VB. I have created an app that will load an image file(yourimage.jpg), preview it, strip the extension (yourimage), upload to server via FTP as (yourimage.jpg)and send an email with the link to it ( url/yourimage.html) . What I really need now is to be able to enter the code in VB to actually create the HTML page with the name as the link.The HTML page needs to load the image and have a form below it. I have a active form already online that uses e-forms to send responses back to me.
View 4 RepliesI have a user control that checks if a certain query string and session value are present then returns a boolean based on that, if it's true I want to set the master page. The page is throwing an Object reference exception when it tries to call the method EditUser1.UserAuthorization(). Why is this happening? I imagine that the method doesn't exist at that point in the stack. Protected Sub Page_PreInit(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.PreInit
[Code]...
