Declare A Property As An Interface Collection Of An Interface?
Feb 7, 2011
I want to declare a property as an interface collection of an interface, and I want to instanciate the explicit type later, in the constructor. Something like this.
Public Class LicenseFile
Implements ILicenseFile
Public Property Collection As IList(Of ILicenseFileDataNode)
[Code]....
In short, the question is "Why It Didn't work"? This is a simplified scenario, but It's easy to take a workarround, But I need understand the reason because It's fails.
I have made dll component and it contains interface. I am executing it in form. The problem is that i would like to use some variables in the form, but I do not like to declare them in there. Is it possible to declare them in this dll interface and then use them in form?
I have ended up with the following event structure in a custom control - it seemed to be the recommended way for my scenario in MSDN (though it wasn't easy to follow!) This is the MSDN page I used,MSDN - How to: Implement Events in Your Class.
[code]...
What now has me totally confused (even more so than I was about setting up the above pattern) is what to declare in the Interface? I wanted to declare the event in the interface since there will be several other classes that do similar things and they need to be used interchangeably (hence an Interface in the first place) and if I've gone down the Interface route it seems smart to make sure the 'minimum' content that each class will have to implement declared in the Interface...
creating a COM component Instance like this for supporting multiple version of COM components
Creating Instance Private _cmObjct As Object Public Property CreatingInstances() As Object Get
[code]....
at the same time how to declare this method without referenced dll SSDP is an interface so how to declare this interface for my usage is this Correct ...?
Error: Dim d as Object = Activator.CreateInstance(Type.GetTypeFromProgID("SecureTronics.SSDP"))
Is there a way for implementers of an interface where a ReadOnly property is defined to make it a complete Read/Write Property ?
Imagine I define an interface to provide a ReadOnly Property (i.e., just a getter for a given value) :
Interface SomeInterface 'the interface only say that implementers must provide a value for reading ReadOnly Property PublicProperty As String End Interface
This means implementers must commit to providing a value. But I would like a given implementer to also allow setting that value. In my head, this would mean providing the Property's setter as part of the implementation, doing something like this :
Public Property PublicProperty As String Implements SomeInterface.PublicProperty Get Return _myProperty
I have a simple control called DipSwitch. It consists of a PictureBox and an ImageList. Here is the code:
Code: Imports System.ComponentModel Imports System.Drawing.Drawing2D Public Class DipSwitch
[Code]...
If I create an instance of the Port, I can add DipSwitches to the Collection through the interface. But they do not show up on the form. Likewise, after adding DipSwitches through the interface, if I try and add more, the original ones disappear, although they remain defined in the Designer module.
I'm having trouble porting some .NET2-era C# to .NET2-era VB.NET. Specifically, I am trying to define an interface that an ASP.NET user control will implement.(For background, I am trying to re-implement Phil Haack's Model-View-Presenter example from several years ago: http://haacked.com/archive/2006/08/09/ASP.NETSupervisingControllerModelViewPresenterFromSchematicToUnitTestsToCode.aspx)
The C# interface I'm working from defines properties and events (IsPostBack, Load) that are already implemented by the base control.However, VB.NET is forcing me to explicitly implement these properties/events in the user control (Public Property IsPostBack() As Boolean Implements IView.IsPostBack...). I'd like to just define these in the interface and not have to do anything special in the code-behind of the implementing user control.I'm assuming that I can do this in VB.NET, I just don't know how. I've spent all sorts of time googling/bing-ing, and haven't come up with the answer.
I'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
I'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)
.Dll: Code: Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer Function SetData(Data As Integer) end interface
[code]....
this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.
Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?
I have a number of pages which implement the same interface:[code]The function doSomethingToTextBox takes a textBox item as a parameter and performs some action on it.I know the textBox is contained on every page which implements my interface, and that it has the same name on each page.My question is: how can I declare the textBox as an interface property? This will remove the need to pass the textBox as a parameter to doSomethingToTextBox()I must also add that I'm currently accessing the TextBox using get/set methods defined as part of the interface - I don't want to have to implement these methods for each page as they are exactly the same on each page.
Public Interface ISegment ''' <value> ''' The offset where the span begins '''</value>
[code]....
The problem is that when I try to use the interface in another class, it tells me that Offset and Length are not members of ISegment. Clearly they are. Here is the code that uses the interface
Public Sub UpdateSegmentListOnDocumentChange(Of ISegment)(ByVal list As List(Of ISegment), ByVal e As DocumentEventArgs) Implements IDocument.UpdateSegmentListOnDocumentChange
Public Interface IHasDateUpdated Property DateUpdated As DateTime End Interface Public Class MyClass
[code]....
Now, assuming I was referencing an instance of MyClass as an IHasDateUpdated; how would I determine the actual name of the property that implements the interface property via reflection?For example:
Dim x As IHasDateUpdated = New MyClass()
' How do I derive "MyDateUpdated" from "x" using x.DateUpdated?
I'm currently trying to create a class that is a composition of the SqlDataAdapter class (as unfortunately you can't inherit from it). In order to try and make it as similar as possible I'm using all the same inherits and interfaces as is documented on MSDN.The problem that I am having is that there are some properties where the interface specifies that the type of the property is IDbCommand. But in the SqlDataAdapter the property type is SqlCommand.
I am trying to develop a simple interface for allowing quick lists to be generated from classes. Basically, the interface needs to return an ID and a Name. However, some classes have a calculated name property which is read only, others just use a read/write name property. Basically, all I care is that it has a getter, it does not matter if the property has a setter. How can I write this interface to handle either or without throwing compile errors?
in the codebase i'm maintaining there is an old interface. Let's call it IFoo. It pretty much became obsolete and replaced with the Interface INewFoo with a change a few weeks ago, but for backwards-compatibility purposes, i wrote a wrapper class which implements INewFoo and takes an IFoo in the constructor.To clarify, consider the following code.
Public Interface IFoo Sub DoStuff() End Interface[code].....
For both interfaces, the implementations are loaded by scanning a few assemblies with StructureMap. Now, let's get to the bad things. Most implementations for the old interface were put into forms for reason i can neither understand nor change. Because those tend to be displayed and disposed, i have to create a new instance every time i use ObjectFactory.GetAllInstances(Of IFoo). Thats still no problem, but i'd like to register a INewFoo-Wrapper for each registered implementation of IFoo, so that i can just use ObjectFactory.GetAllInstances(of INewFoo) and get all implementations of IFoo AND INewFoo.I can't iterate through the implementations of IFoo and register a wrapper for each one because as far as i can see, you can just register those with instances.Wrong code below:
ObjectFactory.Configure(Sub(config) config.Scan(Sub(scan) For Each ass In assemblies[code].....
My question is: Is it possible to register a wrapper for each implementation of IFoo which always creates a new instance of the implementation before creating a new instance of the wrapper?
I have a vb2008 combo box with the DropDownStyle property set to DropDownList.Now, when I set the text property to something programatically nothing happens. That is, the "something" doesn't show up on the control with list collapsed. It still doesn't show even if I force an update(If DropDownStyle property is set to DropDown, setting the text property programatically works fine, even without forcing an update).
I have the following Imports System Imports System.Collections.Generic Imports System.Drawing Imports System.Linq Imports System.Windows.Forms [Code] .....
But I am getting this error: Error1Class 'DemoPlugInTwo' must implement 'ReadOnly Property name() As String' for interface 'Interfaces.IPlugins'. Implementing property must have matching 'ReadOnly' or 'WriteOnly' specifiers.C:Documents and SettingsOwnerMy DocumentsVisual Studio 2008ProjectsDemoPlugInThreeDemoPlugInThreeDemoPlugInThree.vb1420DemoPlugInThree I am getting similar errors for the other property and method. I have them set as read only.
<AcceptVerbs(HttpVerbs.Post)> _ Function Widget(ByVal collection As FormCollection) As ActionResult ... If ... Then
[code]....
I upgraded to ASP.NET MVC 2 Beta and ASP.NET MVC 2 Futures Assembly for Beta and now ToValueProvider() fails with this compile-time error: Interface 'System.Web.Mvc.IValueProvider' cannot be indexed because it has no default property How do I use ModelState.SetModelValue() if not with collection.ToValueProvider()?
I already have one year experienced in c++, and built many private applications.My question is simple to ask, and simple to answer I think.When I select an item in a listview, I want the full item to be selected. Now only the TEXT in the listview item is selected. I've made a picture to clearify my problem.The picture in the link below is splitted up in two pictures. It shows what I currently have, and what I want (my aim)
I have an interface class (IUser) which is the interface of class User. Now, i want to put these into an IList but am confused as to how i should declare the IList:Dim userList As IList(Of IUser) = New List(Of IUser) Dim userList As IList(Of User) = New List(Of User) Dim userList As IList(Of IUser) = New List(Of User) Dim userList As IList(Of User) = New List(Of IUser) when instantiating should you always use its implementation; and when using it as a type use its interface?
And when im creating a new user should i use: Dim myUser as IUser = new User?
