find a way to detect if a process has exited and then restart it. The problem is that I have multiple process' of the same name and exe. finding a way to id each process and detect if that specific process has exited then restart it.
View 3 RepliesMy app starts an On-Screen Keyboard process like this:
Dim PID as System.Diagnostics.Process
:
PID = Process.Start("C:WindowsSystem32osk.exe")
:
[CODE]...
It seems to work 90% of the time. However, sometimes the PID.Kill() fails because it says the process already exited. At this point the OSK is always still there on screen. Yes, I know my code should be testing to see if the process is still running before trying to kill it, but given that the OSK is still on screen..
When I press the exit button (the red X) the process is still running in the system manager. So opening it more than once will end up meaning it will slowly start crashing the computer (if you don't restart).
View 3 Repliesi have wanna rebuild some protect for gaming programs..i need help in vb.net..when i run programs need know "how detected new programs?" and "how to detected malcious programs so my program not kill good programs?" [code]after using this got crash on programs and closing my project
View 2 RepliesIs it possble to detect if a process is killed? 'Cause I want to make so if a user shuts down the process "mspaint" (paint), two more paint will open.
View 3 RepliesI am working on a .NET console app which needs to clean up resources on exit. The problem I'm running into is that I don't get any notification if the cmd parent is closed via the console window [X], via Task Manager/Process Explorer or programmatically with WM_CLOSE. I can live with not being able to handle Kill Process from Task Mgr. or ProcExp. WM_CLOSE of the parent console is the most likely way that this application will be closed before it's finished processing.
Here are the events I've tried to register for so far:
AppDomain.CurrentDomain.ProcessExit += CurrentDomainProcessExit;
AppDomain.CurrentDomain.UnhandledException += CurrentDomainUnhandledException;
Console.CancelKeyPress += ConsoleCancelKeyPress;
Application.ApplicationExit += ApplicationApplicationExit;
[Code] .....
These events fire properly when I send a CTRL+C from the console or the application finishes uninterrupted. But none of them fire when the parent app (cmd console) is closed. (The parent/grandparent processes aren't CLR so I'm not sure I would ever receive those Disposed/Exited events. Those are just shots in the dark.) I've looked at some pInvoke stuff but I would rather not go down that road if .NET is an option. Is there a way to detect and handle a shutdown in these situations? I am open to any .NET, pInvoke/Win32/C/C++ solution. (Basically any way it can be done on the Windows platform.). I'm still working with .NET 2.0 so I can't use anything introduced in .NET 3.0+
trying to detect the process, if it is not running, then only run the process, but it still runs the process eventhough the process is still running :(
For Each Proc As Process In Process.GetProcesses()
Dim strProc As String = Proc.ProcessName & ".exe"
If Not strProc = "MemberSyncFBtoSQL.exe" Then
[Code]....
I have searched everywhere, and have not found an answer. I would like to know how to enable your form to detect if a process is started. Something like this:
If Process.Start("Process.exe") Then
MsgBox("Process is running")
Else
MsgBox("Process is not running")
End If
If I dimension an object as below, do I need to set the object to Nothing before the function is exited, or does it get destroyed when the function exits?
vb Public Function FileTitle(ByVal FullPath As String) As String
Dim subjectfile As System.IO.FileInfo = My.Computer.FileSystem.GetFileInfo(FullPath)
Return subjectfile.Name
End Function
or should it be something like
[Code]...
I'm making a very basic vb.net winforms app, essentially you can drag files into it, and it then uses a batch file to process the files.
It's pretty simple and everything is going to plan so far, it accepts the right files, it uses the batch file to process them and the batch file does what it is supposed to.The only problem is that I don't know how to hook into the Exited event that can/should be raised by the batch file process when the process completes...
I want the DOS window of the batch file to remain hidden while it is running, so I have used ProcessStartInfo to specify the batch file, then set the WindowStyle property of the process to ProcessWindowStyle.Minimised, then used System.Diagnostics.Process.Start(myBatch) to start the process at the appropriate moment.
This is fine, it works and does what I want. However, the only way to tell when a process ends is to use the Exited event. But the Exited event apparently only works with a Process not a ProcessStartInfo. I could switch to use Process instead but then I couldn't (AFAIK) run the DOS window minimised... I've only been writing .net for a few days. This is how I'm running the batch file:
Dim myBatch As New ProcessStartInfo("C:\batchFiles\test.bat")
myBatch.WindowStyle = ProcessWindowStyle.Minimized
system.Diagnostics.Process.Start(myBatch)
I exited out of a form on accident, and now I cant figure how to get it back. When I debug the program, it stiill works, the form is still in the file, I just clicked the "X" to get rid of it. Now I want to edit that form, but it wont let me, because I cant find it.
View 2 RepliesI have some code for starting a process (notepad), and dynamically makes a event handler for the Exited event.
Private WithEvents notepad As New Process
notepad.StartInfo.FileName = "notepad.exe"
notepad.StartInfo.Arguments = fil
[Code]....
But when I try to change the text of a label in the Event handler the application just closes, without any error messages at all.
Sub ExitNotepad(ByVal sender As System.Object, ByVal e As System.EventArgs)
lblLabel.Text = "Test"
End Sub
Our application needs to communicate with another program through a COM interface. The interface will not work if the other program is started with "Run as Administrator". Would like to detect if this other process is in this state and warn the user.
View 2 RepliesI have the following
HTML
Me.AcceptButton = ExecuteButton
MyProcess = New Process
With MyProcess.StartInfo
[Code]....
When the app is finished it displays an "OK" message box. How can I detect the message box and then how can I trigger an equivalent OK click in the app?
I have written a windows service that is meant to launch a notepad when a specific action happens. The problem i have is that even though the service launches notepad, the actual notepad it self is NOT visible. I know that it has been launced because i can see the process in the task manager. By the way the process is listed as a SYSTEM process rather than a process under my user name (i believe that is because my process is a "LocalSystem" one).
View 4 RepliesHow can I make it so that these messages don't show up in my output window from running my application inside visual studio (.NET) These stupid error codes flood my output window and I am doing some testing and using debug.print(" ") to print out vital information about potential bugs and now I have to search for the information like a needle in a haystack because of so many of these:
"The thread '<No Name>' (0x1e24) has exited with code 0 (0x0)."
Is there a way to stop just these ^ ones ?
Say i have an application (WPF/WinForm/Whatever)What happens to a thread created via:
Dim t As Thread t = New Thread(AddressOf Me.AddRecords) t.Start()
I've been working on a multi-form app for some time now, all of a sudden, I'm not able to run my app while debugging. I don't get any errors, but the forms don't load when I start debugging. The message in the Output simply reads: The program '[148] Geo.vshost.exe: Managed' has exited with code 0 (0x0). Any idea what's going on here?
View 2 RepliesI want my vb.net dll to get the data sent from c++ project(exe).Can any body help on in what form this void pointer can be sent via pipe. The void pointer corresponds to enums or structures. I have to get this structures/enums on the vb.net dll end. I have mentioned about using pipe. My question is as what type the pointed to data can be send over the pipe so that I can easily handle the received data at the vb.net dll end.
View 1 Repliesi am trying to write a little program that checks for a process and kills is.here is the
Dim p As Process = Process.GetProcessesByName("Cheat Engine")(0)
p.CloseMainWindow()[code]...
My problem is it�s woking ,yes if the programm ,,Cheat Engine" is running the process is getting killed.But if the program is not running my program crashes.
I'm executing a remote process using WMI and would like to redirect the StandardOutput of that process back to my program. I have found these code examples:
[Code]...
I am getting an error with this code.
The process cannot access the file 'C:UsersdavidDesktopTest Folderdavid 2.xml' because it is being used by another process.
how do i end the prosess after I create the file? Or am I creating it in the wrong manner.The underlined line is where the error ocures.
Public Sub AddDTData(ByVal value1 As String, ByVal value2 As String, ByVal filename As String)
dtUser.Rows.Add(value1, value2, Now.Date)
If My.Computer.FileSystem.FileExists(filename) Then
[code]....
How to get full path of current directory of process from where process starts Like if i use my software to start somefile then I want my software to know where she started it from ( files path) What I mean is the file I opend using my softwares location.
View 2 RepliesI have a program that starts another program after setting the regkeys basically the program continually syncs the calandar of outlook and another application.I set the regkeys than launch the c:sync.exe app. I have tried a simple process.start and launching the process as a thread and they both do the same thing: The other process starts and works as it should but my main program goes "White screen" or "not responding" until the process.start has exited.
I want the process.start to run in the background so if users click in my main app it responds and truly that they can access the context menu of my main app from the taskbar while the process.start is running.
i want a code that if a process that i picked is no match in a process list that process that i picked will start
View 4 RepliesTrying to create a button that when clicked will check to see if a certain process image is running and if that process is running give the process focus. If the process is not running then start the application.
View 9 RepliesI am working on a small VB application that listens for commands sent from an Android app.
One of the functions is to extract an archive. I am familiar with how to listen for the unrar process to finish, so I can display a progressdialog on the phone while the extraction is happening, and clear it as soon as it's done.
BUT ... if there is an error/alert from WinRAR, WaitForExit() never gets called because WinRAR is still sitting there open until I click "OK" on the MsgBox.
For Example ... if you try to extract a file that is not actually an archive... an alert will pop up saying "No Archives Found", and basically everything is halted on the VB app and the Android app, and the Android app just sits on a progressdialog saying "extracting..." until you manually hit "OK" on the computer.
As you can imagine, this is a problem if the whole point of your app is to NOT have to go over to the computer.
So... I am wondering if there is something similar to WaitForExit() that will wait for an error and allow me to close out the alert and let the process end.
Here's my Sub for the UnRar command:
Private Sub UnRar(ByVal WorkingDirectory As String, ByVal filepath As String)
Dim objRegKey As RegistryKey
objRegKey = Registry.ClassesRoot.OpenSubKey("WinRARShellOpenCommand")
[Code]......
I have an issue using Process.MainWindowTitle,Process.MainWindowHandle on some older VB6 applications. After Process.Start I use Process.MainWindowTitle to display in a listbox. The MainWindowTitle returned is not the Window Title but in fact the Project name of the VB6 exe.? I also store the MainWindowHandle to use the ShowWindow and SetForeGroundWindow API's. It would appear that the ShowWindow API does not work, but the SetForegroundWindow does. ie: if the VB6 app is minimized, showwindow does not restore, if it is NOT minimized setforewgroundwindow sets it to the foreground. The exact same code does work correctly for any other .net exe or notepad, only on these vb6 programs I am having a problem.
View 9 RepliesI try to open a text file and write in some text, when i run the program it says the following error:The process cannot access the file 'D:VB projectsCategory_Characteristics.txt' because it is being used by another process.
THe code is as follows and the error hits in line :
Dim objWriter As New System.IO.StreamWriter(FILE_NAME)
-----------------------------------------
Dim FILE_NAME As String = "D:VB projectsCategory_Characteristics.txt"
[code]....
I was wondering if this code could be better optimized for multithreading. What it does is open a process and loops through the data, there could be any range of files to open (so I would like to have say 2 or 3 processes at once):
[Code]...