Private Sub dtg1_DragDrop(ByVal sender As Object, ByVal e As System.Windows.Forms.DragEventArgs) Handles dtg1.DragDrop
If e.Data.GetDataPresent(DataFormats.FileDrop) Then
Dim Myfile() As String
[code]....
Is it possible to modify this section of code to select multiple instances of pictureboxes, so that I can drag them all together. At the moment I have to do one at a time, and when there's more than half a dozen, its a bit tedious. I've added the Control key to distinguish it from single drag'n'Drop, but.
'using Left mousebutton and Control to multi drag & drop
e.Button = MouseButtons.Left And My.Computer.Keyboard.CtrlKeyDown Then
newPictureBox = DirectCast(sender, PictureBox)
[code].....
I found and am using this code to move items from listview1 to listview2.Private Sub ListView1_ItemDrag(ByVal sender As Object, ByVal e As System.Windows.Forms.ItemDragEventArgs) Handles ListView1.ItemDrag, ListView1.ItemDrag Dim myItem As ListViewItem
[Code]...
I am planning on having 12 - 14 listviews on my form.Do I have to copy the above code and name each source and destination listview for all combinations that I want to drag to and from? Or, is there code that will 'read' the source listview1 name when clicking an item from the list and 'read' the listview2 name when the cursor is on the listview I am dropping the item into.Been searching but probably not using correct terms.
I've been successfully dragging one item at a time over from a listbox to a treeview, but now that I'm trying to adapt it to drag/drop multiple items, I've run into a problem.I'm getting an index out of range exception in the loop where I'm trying to gather the listbox items into a string array. Any index greater than 0 throws the exception, even though I have set the length to equal the number of selected items in the listbox. I've double-checked that this is the case many times. Watching the selecteditems.count value, I can see that it is equal to the number of items I have selected, naturally, but the exception is still thrown on this line:
sel(i) = AddonsList.SelectedItems.Item(i)
Here is the relevant drag/drop
[Code]...
I am trying to add multiple files to FTP server by dragging and dropping and I am able to do that using try catch block and if we give the ftp settings correctly it takes 1 sec to upload them but when we give wrong details it hangs up and dosen't give me any error message though If I give an exceptional message.
Now I am getting error message as well as success message for every file I add.I do not want that to be happen.where should I give messages for success and failure so that it should take few seconds for uploading and if not should give me a message immediately.
Here is my code:
Private Sub uploadFile(ByVal FTPAddress As String, ByVal filePath As String, ByVal username As String, ByVal password As String) 'Create FTP request
Try
[code]....
I am currently working on a drag and drop project and I was wondering if there is a way to drag picturebox1 and drop it in picturebox2; that will snap to a specific location in the picturebox2?
View 2 RepliesListView Drag&Drop allow to Drag&Drop between form??
Public Class frmModule
Private Sub ListView1_ItemDrag(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ItemDragEventArgs) Handles ListView1.ItemDrag[code]....
Can it be drap and drop item to other form control??How to write the event when mouse up at the other form control?
OK, so I want to read in the file as whatever someone drags and drops on the .exe file. Once I get that file to be used as the file in the program, I'm fine, I know what I'm doing, but I'm having no luck getting that part done.So far I have this that I found:
Code:
Dim s As String = Command$()
Console.WriteLine(s)
[code].....
You will have to excuse me I am a little bit new to VB. I was wondering if anyone might be able to tell me how I can have my VB application accept a dropped file and then copy that dropped file to a location on the hard drive. Basically what I have is an application that I want when an outlook attachment is dropped on to my VB app on the main form I want it to copy that file to a location on the C: drive. I have tried googling this but all I can find is how to do it between controls and with a listbox.
View 5 RepliesI spent a while searching for answers on the web, but all pages seem to forget about my query.
I'm experienced well enough with receiving drag and drop events of any kind, including images and files.
I also feel comfortable about the other way round -- using the DoDragDrop function to start a drang and drop of any kind.
Any kind, except files. How can I start a file drag and drop, for example of an image?
I tried setting the data to a string containing the file path but that didn't work.
(VS2010Pro, VB.NET 4, Windows Forms)
Just call me Silvi or LS... My site:
here
I wanted to make a little app where you could drop a .txt file on the form and it would show the text in a textbox or richtextbox.
View 2 RepliesYou will have to excuse me but I am a little bit new to vb. Anyways I was wondering if anyone knew a way to have a vb app accept dropped files on the main form. Basically what I have is a program that needs to accept dropped files (outlook attachments to be specific) and copy that file to a specific location on the C: drive. Then I need it to store the file name and path to a variable and set a text box on the main form equal to that variable
View 5 RepliesAlright here's my situation: I have a form. This is a very small form that can be moved with the mouse (formborderstyle=none). The transparencyKey is 0,0,1. The form back color is 0,0,1. There is a label on the form. I drag files to this label(its backcolor is black[0,0,0]). What I want is for the filesize to be checked. I already have the uploading to ftpcode, I just want to know if the file is above my limit I set. (250mb per file)
[Code]....
How do I drag and drop a file from outside the window onto a form? For example: drag and drop an image from windows explorer into panel1 in form1?
View 1 RepliesMy Q is: How can i drag and drop a file into a rtb and have it show the content. Like Notepad++
View 6 RepliesHow do i Drag n Drop text file (.txt or any hoter format ,vbs,bat etc...) to a textbox in VB.NET ? Step by step tutorial with code so i can copy/paste would be nice.
View 7 RepliesTwo questions: how can I completely wipe a file from disk with vb.net? I found a code in C#, converted it to VB.net online but didn't understand a letter. I was thinking on a wiper like CCleaner has, but for a selected files only.
And, how can I manage drag-n-drop functions? Like... drag something into my form (or my app's exe) and do something with it?
I have one picturebox. I need to drag drop image file in picturebox change image in the picturebox?
View 1 RepliesIs it possible to drag a file into say a listviewbox and then code it to save the file to a location on my network drive?
View 8 RepliesThe below code msgs me the file path of a file I drag and drop onto the form. How can i restrict it to only allow .watever files to be dropped on the form. MSDN didn't do a good job explaining this.
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.AllowDrop = True
End Sub
Private Sub form1_DragEnter(ByVal sender As Object, ByVal e As System.Windows.Forms.DragEventArgs) Handles Me.DragEnter
If e.Data.GetDataPresent(DataFormats.FileDrop) Then
e.Effect = DragDropEffects.All
End If
End Sub
[Code]...
I have finally got the drag and drop to work on my form, so the user can drop files on it. I have used the msdn example so i can get the whole filename (path + filename). But how do i get only the filename? (lol.zip) And maybe the path where it is?
[Code]...
I am using Excel 2007, VS2008 Pro.I am building a VSTO Add-in that requires "drag and drop from Excel cells to a drag-enabled task pane".So far I notice that I can only drag and drop within the cells themselves. It does not allow me to drop into the task Pane or drag past the sheet limits.(http:)[url]...
Note: The task pane has drag drop enabled, I ahve already tested I can drag/drop from task pane to excel but I need to do this the other way around?
I found this code but can't use it as its VB6 and I need VB 2008. I tried changing it but can't seem to get anywhere.
Code:
Private Sub List1_OLEDragDrop(Data As DataObject, Effect As Long, Button As Integer, Shift As Integer, X As Single, Y As Single)
Dim vFile As Variant
If Data.GetFormat(vbCFFiles) Then
For Each vFile In Data.Files
List1.AddItem vFile
Next vFile
End If
End Sub
I am once more stuck:There are 2 PictureBoxes on my Form. They get the image from the Application's StartUpPath, "1.jpg" for PictureBox1 and "2.jpg" for PictureBox2. All the dragging and dropping works fine. What I still need is a bit of code change that will allow me to rename the original files:
"1.jpg" -> "2.jpg"
"2.jpg" -> "1.jpg"
[code]....
I am trying to figure out a way to include the listview's tag field when dragging one listview's subitems into another listview. I am hoping someone here has experience with this. My Listview drag code is below - the two listviews that I am dragging subitems into or from are LV1 and LV3. Also, this is being done in Visual Basic 2008 and the project is a windows application.
[Code]...
I am working on a vb forms application in VS2008.What I am looking to do is have 3 file managers on the form.The top is the source where files can be copied to the 2 other file managers.What I have been looking for is an example of the file explorer so I can modify it.So far I have been unsuccessful in finding a good example so I am here to ask the experts.So the gist is the first file explorer will allow a user to connect to thier local hard drive.The other two file explorers would allow the user to connect to two different servers through entering the path they want to view those file trees.After that the user could click on the file they want to copy and then hit a button for example and the file would be copied from the local to the two other areas.Would it be easier to just use text boxes with a confirmation that the files are being copied?Or can a full file manager be built to drag and drop files?
View 2 RepliesIn my current project I've run into a problem with dragging and dropping from my app to Windows Explorer. My app requires an "Extraction" of a virtual file (almost like a ZIP/RAR archiver would). The problem is, with all of the dragging to explorer solutions I have found online requires you to have a extracted file already on the filesystem (most likely in a temp folder) before you initiate the drag-drop. I'm trying to do is be able to extract the file AFTER the drag-drop request has already been made to the explorer.
View 1 RepliesI have a VB .NET (VS 2008) application which allows the user to drag and drop a xls file onto the form and a DataGridView fills with the xls sheet data. The user than can apply changes to the data or add entries. Data integrity is checked during the load into the DataGridView (duplicates are removed and invalid entries are filtered out). After doing all this the user can click a button and the data is uploaded to a SQL server (2008) DB. I have a primary key set up (row number) and I have a compound key in the SQL table.
It is all working beautifully. Now here is my question:
I want to check for duplicate entries (between SQL server and DataGridView data) before the data is uploaded and commited to the table. What would be the most efficient way to that?
drag and drop nodes within the same tree (not between trees) when users drag and drop nodes within the tree, give them the option to move the original node to a new location within the tree OR to just copy the original node in a new location (seems complex but I have a month to figure this out). change the system default blue highlight for selected nodes to another color change the system default cursors for invalid and valid drops (instead of the circle with slash indicating invalid target, i want a red minus) and (instead of the little plus sign with little box indicating a valid target, i want just a big green plus sign) add a red insert line to indicate where the node would be dropped within a tree also drag and drop the text of a node from the tree to a textbox add a "folder" image next to parent nodes and a "document" image next to children nodes
I have looked through the internet but I am having difficulty sorting through all the information available (I see a lot of information for Visual Basic 5 and 6, and those codes don't work for me in visual studio 2008). I can email anyone my code I have so far.
Public Class Form1
Private MouseIsDown As Boolean = False
Public Sub TreeView_ItemDrag(ByVal sender As Object, ByVal e As ItemDragEventArgs)Handles TreeView1.ItemDrag
[Code]....
Is it possible to reorder the elements of a drop down list (combobox) via drag and drop?For example, when the list is dropped down, I want the user to be able to drag the items up or down to reorder them. I tried this (and some google searching) but I'm wondering if its just not possible:
Private Sub cmbClassLists_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles cmbClassLists.MouseDown
If cmbClassLists.DroppedDown And Not cmbClassLists.SelectedIndex = -1 Then
[code].....