I am having some trouble drawing a circle that is constant when the program runs. right now I am able to create one of my clock hands (that is going counterclockwise), but I can't figure out how to draw the circle of the clock, any suggestions? [Code]
View 4 RepliesI want someone to help me on using graphics on vb.net form.I am planing to make a clock so first i want to draw 12 points in a circular fashion.
View 3 RepliesPrivate Sub PictureBox1_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles PictureBox1.Paint
e.Graphics.DrawEllipse(Pens.AliceBlue, New Rectangle(New Point(0, 0), New Size(PictureBox1.Width, PictureBox1.Height)))
End Sub
I am trying to draw a circle in VB.Net, .Net version 4.Nothing shows up in the paintbox.
Using Visual Basic 9 I want to draw a circle and gradientFill the circle using FillGradientStyle = Centraland a FillStyle = SolidWith the same results as can be achieved in The Power Packs 3.0 OvalShape.
View 1 RepliesI searched this forum for the answer before posting this and from what i have noticed there is no "simple" way ofcourse "simple" definition varies from one person to another
my definition of simple is something like this Line(x1,y1,x2,y2,color) or something like that.[code]...
How can I program a quarter portion of a circle, with points A and B ??
How can I code the red line on the image?
User launches the application, enters width of circle, then enters width and height of rectangle and presses the button. Then app draws the circle with rectangle inside of it (if it fits). App should output the coordinates x1;y1 , x1;y2 , x2;y1 , x2;y2 (corners of rectangle) somewhere on form and would be great if it could post those coordinates on x and y axes (optional).
View 23 Replieshow to draw the circle at the below position, i have marked where i should get the angle. And i m also sending my piece of code.
Plz tell how to draw the circle at 180 degree on x-axis, For green circle. And later i should draw at the same place semi circle, dnt know how to draw them... i.e on green circle at zero n 180 degrees.
This code is to draw a circle in the form with one button in vb.net. Dim g as system.drawing.graphics
g=me.creategraphics
dim p as new system.drawing.pent(system.drawing.color.Blueviolet)
g.drawellipse(p,150,100,30,60)
end sub
this is not working it is showing the error in the declaration of p any one can help me out to rectify this error
Is there a way to draw a circle by specifying the center of the circle rather than the upper left corner?
This is what I'm using to draw the circle[code]...
How to draw lines inside the circle. I mean a circle with n-number of lines within in it.
View 7 RepliesI need to write some code which draws a predefined circular path (say 48pix diameter) and use a timer to delay it to show it being drawn. I need to use GDI+ to do this. My guess is on the Timer.Tick, I would set some Point value for the next point on the path, and then call Invalidate to raise the Paint event.
View 5 Repliesi want to draw picture of circle and cylinder in my programme, i am using visual studio 2005 programme anyone able the give me guide.
View 3 RepliesI am trying to draw a circle on the visual basic console. I have been told that the console is not made for this but i have to use it.
What I want to do is a circle with:
Centre (40,20)
Radius = 10
I know from basic trig that the following will give me the points on the circle:
x= (10 x CosA)+40
y=(10 x SinA) +20
(A) being an angle in radians.
Then combine x & y that will give me a point on the circle.
I want to use the '' Sets the cursor position
Console.SetCursorPosition(x, y)
Console.Write(".") "
To print a point(.) on the given position from the formulas above.
Now heres my question how do I get Visual Basic too calculate:
x= (10 x CosA)+40
y=(10 x SinA) +20
360 times i.e 0rad-2Pirad and then pass the x & y [(x,y)] point to my cursor position code so that a '.' is printed at that position. I.e I will end up with a circle made out of 360 '.'
I would asume that a loop is used and also an array to store the 360 Pi values. I'm finding it extremely hard to even get Vb to calculate the Cos of an angle.
is it possible to draw an accurate circle in vb.net with mouseDown and mouseUp boundaries? I only manage to create circle-settings with rectangular boundaries using DrawEllipse. I've tried to work around it using pythagoras but it just doesn't work and I'm pretty sure I've got my maths right...
Is it possible to define a circle with DrawEllipse(pencil,x1,y1,width,length) ?
Question: I need to draw pictures as below in C#/VB.NET Draw ishihara-transformations (circles in circle without intersection)?
Note that my problem is NOT drawing circles in C#.
My problems is drawing them without much whitespace and without intersection.
My thought would be using "Orbits" and then draw the circles with center on the "orbit" lines. (with some orbit lines for bigger and some only for smaller circles)
I have developed a program which continuously draws a circle using a timer. Now every time the circle gets displays it flickers and which is because i have used me.refresh. Is there any other way to avoid this flickering.
Here is my code
Private Sub Timer1_Tick(ByVal sender As Object, ByVal e As EventArgs) Handles Timer1.Tick
Me.sweepAngle += 1
If Me.sweepAngle = 360 Then
[CODE]....
I'm a totally newb to VB and I want to do this. I want to do display system clock into a textbox. The trick is that I want it to be synchronized with the Windows XP clock. I want to have something like +/- 100 ms accuracy.
Each 'second' change will trigger an output pin to ground into the parallel port. This is very important that the 'second' change in the same time the Windows XP second change. Do not care about the parallel output thing, I'm nearly there. My main concern is the synchronisation with Windows clock.
In my code, I've added a counter that increment +1 at each 'second' change. So, when the 'n' value will reach a determined value, it will trigger another event.
[Code]...
I searched on the net and I found a thing about NIST time server.. Maybe this could be an otpion, but I have even no idea about how using it... I'm a total newb, but I'm ready to learn. So, please use simple language, no hard to understand acronym etc.
I need to get the DataGridView to perform the way it should perform. I'm new to the .NET environment, but I learn fairly quickly. However, I find it difficult to decipher themassive black box of the DataGridView control enough to make it do anything other than what it already does--Draw very slowly.
View 3 RepliesI have an assignment and I have to calculate the area of a circle. I have my textboxes and buttons but I don't know how to write the codes and I have followed the directions and the example in my book which is microsoft visualbasic 2008 step by step.
View 2 RepliesWhen I change the color of the circle it creates a new circle. How do I get it to change the color of the existing drawn circle?
View 6 RepliesI have created a program that Draw a circle and then you can move it around a picturebox. I have made code so that it changes colour but instead of changing the colour of the circle already been drawn it creates a new circle which when you overlap the original circle with the new circle it cuts part of it.So what I wanted it to do when I change the colour of the circle it changes the colour of the circle already been drawn instead of creating a new circle.
[Code]...
Also I can't use the X and Y coordinate input to move the circle to the entered coordinates.
I drew a filled circle using: pixFractal.CreateGraphics.FillEllipse(RedBrush, MyPoint.X, MyPoint.Y, 16, 16)
I expected the circle to be centered on MyPoint. Instead, it seemed to be drawn as though centered in a square whose upper left corner was at MyPoint.
I am making a whiteboard program. So far I managed to generate the ability to draw lines and other small things. The problem is that I want to make a circle that follows the cursor to display what a dot there would look like. I am aware of the creategraphics property of picture boxes, but when I do that the circle stays there and a new one is generated where the mouse is now (an expected result). My question is, is there a way to draw and delete circles as the mouse moves. Also, is there a more efficient way of doing this. I did try using the OvalShape found in the power pack, but I cannot figure out how to display that over the picture box, when I right click the oval nothing happens.
View 2 RepliesOkay, so I am making a whiteboard program. So far I managed to generate the ability to draw lines and other small things. The problem is that I want to make a circle that follows the cursor to display what a dot there would look like. I am aware of the creategraphics property of picture boxes, but when I do that the circle stays there and a new one is generated where the mouse is now (an expected result). My question is, is there a way to draw and delete circles as the mouse moves.
View 3 RepliesI'm trying to draw a partial circle with GraphicsPath, starting at the top of the document, going counter-clockwise 270 degrees, so that it will look like a clock at 3 o'clock. The following is a simple, partial translation of my function.
Dim DestImage As New Bitmap(Source.Width, Source.Height)
Dim g As Graphics = Graphics.FromImage(DestImage)
Dim gp As New GraphicsPath()
[Code].....
can i have codes of drawing a circle using visual basic 2005
View 3 Repliesi need a code the will draw a circle on a picturebox that will have the border color blue and the inside color black. i also need the same thing but for a square.
View 16 RepliesI would like to be able to move mouse in a circle, given the height and width...
View 2 RepliesI am trying to do a do while loop to make a circle draw itself resized by 1 each time 50 times. I just dont know how to define the numbers that make up the circle size properties. here is my simple code
Me.CreateGraphics.DrawEllipse(pencolor, 135, 125, 5, 5)
I would like to just make a simple do while loop to adjust the 5,5 by +1. I am really new to programming and any help will be excelent. If I knew the property name of the 2 numbers I need to change I could declare them as a letter H & W and just do while
H,W is < 56
H+1
W+1
if this makes any sense?