is it possible to draw an accurate circle in vb.net with mouseDown and mouseUp boundaries? I only manage to create circle-settings with rectangular boundaries using DrawEllipse. I've tried to work around it using pythagoras but it just doesn't work and I'm pretty sure I've got my maths right...
Is it possible to define a circle with DrawEllipse(pencil,x1,y1,width,length) ?
I'm working with a project that is WPF and VB.net. I want to visually simulate "dragging" an object (though I do not want to use standard drag and drop for reason of purpose).Basically, I have a label object that, on its MouseDown event, I want it to follow the mouse cursor inside a 640x480 solid-size grid (but not outside of it!). Mind you, this grid is centered inside a full-screen window. Again, the object should not follow the mouse outside of the grid (I'm guessing a "ClipToBounds = True" here)Then, on the label's MouseUp event, I want it to either stay in its current position or return to its original position, as determined by the value of a boolean variable set by another object's MouseEnter property.Note, if it would be easier to work with, I can change the grid to a canvas in a cinch. I'm guessing that would be desirable.
How do I make the object (label) follow the mouse cursor inside the grid/canvas, but not outside of it? This needs to happen on the MouseDown event of the label.How do I make the object "stick" in its current position? (From this, I can probably figure out how to make it return to its original position on my own.
How to draw a rectangle inside an ellipse by mouse events like mousedown,up,move
View 2 RepliesPrivate Sub PictureBox1_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles PictureBox1.Paint
e.Graphics.DrawEllipse(Pens.AliceBlue, New Rectangle(New Point(0, 0), New Size(PictureBox1.Width, PictureBox1.Height)))
End Sub
I am trying to draw a circle in VB.Net, .Net version 4.Nothing shows up in the paintbox.
Using Visual Basic 9 I want to draw a circle and gradientFill the circle using FillGradientStyle = Centraland a FillStyle = SolidWith the same results as can be achieved in The Power Packs 3.0 OvalShape.
View 1 RepliesI searched this forum for the answer before posting this and from what i have noticed there is no "simple" way ofcourse "simple" definition varies from one person to another
my definition of simple is something like this Line(x1,y1,x2,y2,color) or something like that.[code]...
How can I program a quarter portion of a circle, with points A and B ??
How can I code the red line on the image?
User launches the application, enters width of circle, then enters width and height of rectangle and presses the button. Then app draws the circle with rectangle inside of it (if it fits). App should output the coordinates x1;y1 , x1;y2 , x2;y1 , x2;y2 (corners of rectangle) somewhere on form and would be great if it could post those coordinates on x and y axes (optional).
View 23 Replieshow to draw the circle at the below position, i have marked where i should get the angle. And i m also sending my piece of code.
Plz tell how to draw the circle at 180 degree on x-axis, For green circle. And later i should draw at the same place semi circle, dnt know how to draw them... i.e on green circle at zero n 180 degrees.
I am having some trouble drawing a circle that is constant when the program runs. right now I am able to create one of my clock hands (that is going counterclockwise), but I can't figure out how to draw the circle of the clock, any suggestions? [Code]
View 4 RepliesThis code is to draw a circle in the form with one button in vb.net. Dim g as system.drawing.graphics
g=me.creategraphics
dim p as new system.drawing.pent(system.drawing.color.Blueviolet)
g.drawellipse(p,150,100,30,60)
end sub
this is not working it is showing the error in the declaration of p any one can help me out to rectify this error
Is there a way to draw a circle by specifying the center of the circle rather than the upper left corner?
This is what I'm using to draw the circle[code]...
How to draw lines inside the circle. I mean a circle with n-number of lines within in it.
View 7 RepliesI need to write some code which draws a predefined circular path (say 48pix diameter) and use a timer to delay it to show it being drawn. I need to use GDI+ to do this. My guess is on the Timer.Tick, I would set some Point value for the next point on the path, and then call Invalidate to raise the Paint event.
View 5 Repliesi want to draw picture of circle and cylinder in my programme, i am using visual studio 2005 programme anyone able the give me guide.
View 3 RepliesI am trying to draw a circle on the visual basic console. I have been told that the console is not made for this but i have to use it.
What I want to do is a circle with:
Centre (40,20)
Radius = 10
I know from basic trig that the following will give me the points on the circle:
x= (10 x CosA)+40
y=(10 x SinA) +20
(A) being an angle in radians.
Then combine x & y that will give me a point on the circle.
I want to use the '' Sets the cursor position
Console.SetCursorPosition(x, y)
Console.Write(".") "
To print a point(.) on the given position from the formulas above.
Now heres my question how do I get Visual Basic too calculate:
x= (10 x CosA)+40
y=(10 x SinA) +20
360 times i.e 0rad-2Pirad and then pass the x & y [(x,y)] point to my cursor position code so that a '.' is printed at that position. I.e I will end up with a circle made out of 360 '.'
I would asume that a loop is used and also an array to store the 360 Pi values. I'm finding it extremely hard to even get Vb to calculate the Cos of an angle.
Question: I need to draw pictures as below in C#/VB.NET Draw ishihara-transformations (circles in circle without intersection)?
Note that my problem is NOT drawing circles in C#.
My problems is drawing them without much whitespace and without intersection.
My thought would be using "Orbits" and then draw the circles with center on the "orbit" lines. (with some orbit lines for bigger and some only for smaller circles)
how to view and populate a listview with a text file. Now I come seeking wisdom on how do create an effect based upon the location where a mousedown event occured.
Here is my example. (I like to give simple examples because it helps me learn rather than be given the answer and learn nothing).
I am working in vb.net, in a windows form. I have a map of Western Europe called picturebox1.
I want another form to pop up when a user clicks on a section of picturebox1. For example: I want a "Germany" form to pop up when the user clicks on Germany. And such for if France, Spain, Italy, Austria, England, Scotland, etc...based on the location of the mousedown event.
Historically, when working with a picturebox with sections that were rectangle, I would do little screenshots and overlay them over the picturebox and use that as a cheat.
The challenge here is that the countries are polygons and now I need to learn this for real. I am looking for a little direction on where to go to learn about a mousedown event that causes an effect based upon the location of the mousedown event.
This can be a challenge because each country is of different x, y location coordinates so I image I need to create an elaborate if or case statement to capture and evalute. However, I don't know how to acquire the coordinates of a mousedown.
I have developed a program which continuously draws a circle using a timer. Now every time the circle gets displays it flickers and which is because i have used me.refresh. Is there any other way to avoid this flickering.
Here is my code
Private Sub Timer1_Tick(ByVal sender As Object, ByVal e As EventArgs) Handles Timer1.Tick
Me.sweepAngle += 1
If Me.sweepAngle = 360 Then
[CODE]....
I'm using the MouseDown to create objects, they are used within MouseMove and they are killed within MouseUp Event. Now I want to use the Doubleclick Event to build in some shortcuts. My problem is that the MouseUp routine is called sometimes before the DoubleClick routine. I do need the MouseDown Event before starting the DoubleClick code, however sometimes the MouseUp event is triggered which is killing the needed objects.
Is it possible to get the DoubleClick-event routine always without the MouseUp routine?
'Main Code:
Public Class Form1
Dim mPosX As Integer
Dim mPosY As Integer
Private Sub SizeW_Tick(sender As System.Object, e As System.EventArgs) Handles SizeW.Tick
If Not ((Me.MinimumSize = Me.Size And ((MousePosition.X - mPosX) + Me.Width > Me.Width)) Or (Me.MinimumSize <> Me.Size)) Then
[Code]...
I am making a user control named MultiSelect, which consists of a textbox. In this textbox I put substring. I want the user control to show a treeview outside the MultiSelect boundaries where items matching the substring will be shown.
For me its no problem to make a treeview inside the MultiSelect boundaries but I need to save space on the original form where a MultiSelect control will appear, so I need to do it like the treeview will appear and after I choose items, it will disappear
say your silverlight area on a webpage is 200px by 200px.you open a child window, is there a way to make it moveable outside the 200x200 silverlight area?or say you drop down a combo box, let the drop down go out side of the 200x200 aea?
View 1 Repliesi am trying to make a game in vb.net and so far have managed to create a sprite which is animated on key event. the only problem is it able to walk off the form out of site. i want to be able to create some sort of boundary so that when sprite position equals greater or smaller then the form width it can no longer walk in that direction, the same goes for the hight. i have tryed this myself like this
[Code]...
the title pretty much sums up the problem: the existing HScrollBar control does not expose a MouseUp event. How do I go about adding this event to the control? I'm using VS2005.
View 8 RepliesI'm using KeyDown to get the picturebox to move around, but I don't know how to keep the boat within the boundaries of the form. So if it hits the side of the form, I want it to just stop.
What control/procedure should I use to do this?
[url] How is this done? Is it a control of that form? Or is it a splashscreen or something like that?. I've tried by doing that with another form instead, but the first form will get unfocused, and i want the main form to be always focused.
View 6 RepliesToday I started a little sub that would let me move a control around the form using ssigned keys but would stop at the edges of the form. I can get it to move around alright but I can't get it to stop at the edges of the form.
View 2 RepliesSo I've created a series of objects that interact with a piece of hardware over a serial port. There is a thread running monitoring the serial port, and if the state of the hardware changes it updates properties in my objects. I'm using observable collections, and INotifyPropertyChanged.
I've built a UI in WPF and it works great, showing me real time updating when the hardware changes and allows me to send changes to the hardware as well by changing these properties using bindings.
What I'm hoping is that I can run the UI on a different machine than what the hardware is hooked up to without a lot of wiring up of events. Possibly even allow multiple UI's to connect to the same service and interact with this hardware.
So far I understand I'm going to need to create a WCF service. I'm trying to figure out if I'll be able to pass a reference to an object created at the service to the client leaving events intact. So that the UI will really just be bound to a remote object.
Am I moving the right direction with WCF?
Also I see tons of examples for WCF in C#, are there any good practical use examples in VB that might be along the lines of what I'm trying to do?
I sometime use a 'catch-all' procedure for an event for all textboxes, such as:[code]Is there a way of finding out which textbox I am in?
View 2 Replies
