the title pretty much sums up the problem: the existing HScrollBar control does not expose a MouseUp event. How do I go about adding this event to the control? I'm using VS2005.
View 8 RepliesIn VB6 we had a code inside textBox_MouseUp to call textBox_KeyUp(-1, 0) and the signature of KeyUp was
Private Sub textBox_KeyUp(ByRef KeyCode As Short, ByRef Shift As Short) Handles textBox.KeyUp
Now when I migrate to .NET I changed the KeyUp event to Private Sub textBox_KeyUp(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles textBox.KeyUp
How can I do this call textBox_KeyUp(-1,0) now from textBox_MouseUp event?
'Main Code:
Public Class Form1
Dim mPosX As Integer
Dim mPosY As Integer
Private Sub SizeW_Tick(sender As System.Object, e As System.EventArgs) Handles SizeW.Tick
If Not ((Me.MinimumSize = Me.Size And ((MousePosition.X - mPosX) + Me.Width > Me.Width)) Or (Me.MinimumSize <> Me.Size)) Then
[Code]...
My HScrollbar will only go to 9 less than the specified Maximum value. I want it to go from 0 to255. When I set the Maximum value to 255 and run the program the slider indicates 246 when full right. I can get it to go to 255 by setting the Maximum value to 264 but this seems very wrong.
View 2 RepliesI have successfully ported a VB6 application to VB.NET (VS2008, .NET 2.0). Much optimization and rewriting has been done, but there is one possible BUG i cannot overcome. I have a standard HSCROLLBAR control used for accepting a numeric input. The control needs to be disabled during complex computational routines to prevent additional user input. I am setting the enabled property to false and reenabling the control at the end of the calculation cycle. The control is enabled and disabled a few times, because some code has been placed in the onpaint event of a drawing area, and separating the calculation part from the drawing part will be a huge task.
Large changes are handled correctly. Small changes aren't. The problem is that the control freezes in a unknown state after clicking on the arrows. A second click makes the control (and its parent control box) jump up and over everything else in their container.The scrollbar remains functional only via the contextual menu. This happens both in debug and release builds. There are no overrides. Coding/Test platform XP SP3 (more than 1 machine).
There is no code whatsoever that handles neither the parent control nor the scrollbar repositioning and resizing. The only code takes the value of the scrollbar and passes to the calculation section. If I omit disabling and reenabling the control, everything works fine.i tried rebuilding the control from scratch. forcing enabling the control after it has gone haywire does not make changes, disabling the groupbox instead of the single control doesn't make any difference, debugging step by step confirms that things go wrong when drawing the controls within the private system form classes.
I've read thru Iceplug's tutorial on control arrays and got it working. I tried to add a new event by basically copying his click event code and calling it a doubleclick event. I used the proper addhandler and assigned the correct name to my sub. I have the click event changing the background color to blue and the doubleclick event changing the background color to green. The background color does not change to green. Why?
Heres the tutorial with my new code encased in asterisks ...
Code:
Imports System
Imports System.Windows.Forms
Public Class form1
[CODE]...
Do the VScrollBar and HScrollBar controls have a known Value bug?I'm using VB10. While testing some code I used a Horizontal Scroll Bar to change a value on the fly, I thought my code had some bad math in it until I discovered that when the bar is scrolled to the very far right the Value was not equal to its Maximum value setting like it is in VB6, the same happens for the Vertical scroll bar control, set the maximum to 100 the Value will only go up to 91, set max to 200 and value only goes to 191, etc.
View 4 RepliesI'm using the MouseDown to create objects, they are used within MouseMove and they are killed within MouseUp Event. Now I want to use the Doubleclick Event to build in some shortcuts. My problem is that the MouseUp routine is called sometimes before the DoubleClick routine. I do need the MouseDown Event before starting the DoubleClick code, however sometimes the MouseUp event is triggered which is killing the needed objects.
Is it possible to get the DoubleClick-event routine always without the MouseUp routine?
How can i use Hscrollbar to scroll the data in a database displayed in a textbox1 in my Form1?
View 6 RepliesI sometime use a 'catch-all' procedure for an event for all textboxes, such as:[code]Is there a way of finding out which textbox I am in?
View 2 RepliesIs there anyway to detect on Mouseup when column is being resized not cell clicked?
View 5 Repliesis it possible to draw an accurate circle in vb.net with mouseDown and mouseUp boundaries? I only manage to create circle-settings with rectangular boundaries using DrawEllipse. I've tried to work around it using pythagoras but it just doesn't work and I'm pretty sure I've got my maths right...
Is it possible to define a circle with DrawEllipse(pencil,x1,y1,width,length) ?
I'm working with a project that is WPF and VB.net. I want to visually simulate "dragging" an object (though I do not want to use standard drag and drop for reason of purpose).Basically, I have a label object that, on its MouseDown event, I want it to follow the mouse cursor inside a 640x480 solid-size grid (but not outside of it!). Mind you, this grid is centered inside a full-screen window. Again, the object should not follow the mouse outside of the grid (I'm guessing a "ClipToBounds = True" here)Then, on the label's MouseUp event, I want it to either stay in its current position or return to its original position, as determined by the value of a boolean variable set by another object's MouseEnter property.Note, if it would be easier to work with, I can change the grid to a canvas in a cinch. I'm guessing that would be desirable.
How do I make the object (label) follow the mouse cursor inside the grid/canvas, but not outside of it? This needs to happen on the MouseDown event of the label.How do I make the object "stick" in its current position? (From this, I can probably figure out how to make it return to its original position on my own.
How should I go about getting my mouse position over multiple controls, and such. I can't use the form_mouse move event, or any other control event nor can I use them all at the same time cause that would conflict with the actual position I need for an object.
View 10 RepliesI've created my own ascx control with button inside it. Now I'm using this control inside other control. (In my case it is a webpart). What I would like to do is program button.click logic from my custom control inside webpart
View 4 RepliesThe code is listed below which hopefully illustrates what I'm trying to do:[code]....
View 12 RepliesI have a TopBar, A LeftBar, A VScrollBar, A HScrollBar and a Panel inside a SplitContainer Panel.The issue I'm having is that when my SplitContainer Panel is small enough to enable one of the ScrollBars, I will slide the ScrollBar and then when I resize the Split Panel, my Panel1 is staying where I scrolled it too.I'm having troubles thinking of the correct code to fix this.
[Code]...
I am writing below code for validating compulsary field account no. in form.User's requirement is set focus back on field when error comes :
If txtAccountNo = "" Then
MessageBox.Show("Account no filed can't be left empty")
txtAccountNo.SetFocus
Exit Sub
End If
It's working properly. But suppose user don't want to fill form and exiting from application.Message box keep on appearing till user enters account no.
ok so i have a PANEL control under a WINDOWS MEDIA PLAYER control. Both are same size.
The panel has a click event which shows a message saying "HI"
when the panel is behind the wmp control the message is not shown when i click on it.
so the question is is there a way round it, cos currently it only works if the panel is on top of the wmp control
if i'm creating the listview using the new listview instead of actually putting a listview on the form directly. how do i access the listview.click and mouseup.click etc..since there's no lstview until the program loads?
View 4 Replieshow can i call a VB function - deleteevent() in usercontrol.ascx.vb from a javascript function in clickhandler(e) in usercontrol.ascx. The call should cause a postback because I need the usercontrol to display the changes.I am currently trying to do it by using a linkbutton with style display:none, and calling its click event from the javascript function. But i dunno how to call the click event.
View 2 RepliesI am trying to do something like:I have a cicle (For Each) which goes trough some items (existing N items)So, for each item read i have to create a control (a Label in this case) which must have the Click, MouseEnter and MouseLeave events . Each event will use/edit properties of the created control Creating those labels is easy but adding the event handler to the control i have no clue how to do it ... Believe me when I say I've spent a lot of time thinking about this .
View 3 Replieswhich control have no event in.net
View 2 RepliesI have a menu item in a program that I'm working on called "mnuFileSave" The Click event goes through several "housekeeping" functions and calls the correct "Save" function.
Another menu item performs a function and depending on the results may want to call the "mnuFileSave".
I have tried RaiseEvents mnuFileSave.Click and get the error "mnuFileSave' is not an event of 'The_Entertainment_Collection.frmCollectionBook'
I have tried Call mnuFileSave.Click an get the error "Public Event Click(sender As Object, e As System.EventArgs)' is an event, and cannot be called directly. Use a 'RaiseEvent' statement to raise an event."
i already finish this module but while doing 2nd module i notice that my 1st module doesnt work anymore, then i checked my code, i double click the control at design time and thats it instead it brings me to my actual code of that control, it brings me to another event, like this, this is where my original codes are placed:
Code: Private Sub lblSupplier_Click(ByVal sender As System.Object, ByVal e As System.EventArgs)
End Sub then, after the poblem occurs, the control created another event like this:
Code:Private Sub lblSupplier_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs)
End Sub notice the difference, they are the same click event but the other one has an "_1" at the end of click.
I'm looking to create a custom date picker with code examples from several sources.
Is the code to display/hide an ASP.NET control when a user clicks a button usually done with JavaScript or ASP.NET code? By display/hide, I mean within the page not a popup window.
[code]how to detect if what button did i clicked? i just want to disable the button i clicked or change it properties..
View 2 RepliesI have an event which handles multiple controls. How can I tell which control caused the event? [code] I want to run validation on each control, (combo and textboxes) and if it succeeds, enable a button. I could do this for every control individually but I want to know if I can use the sender value to determine which control needs to be validated.
View 3 RepliesI want to invoke another control on the from when i click on one control.
Eg. When i click on btnOpen , i want btnClose to be activated
With the tab control, I cannot find the event which is triggered when I first click on a tab The following event is triggered, once on the tab, by clicking on the tab page (not the tab)[code]
View 6 Replies