Ending Remote Processes - Take Text From A Textbox And The Selection From A Combobox
Sep 7, 2011
I have a completely basic program here that I want to simply take text from a textbox and the selection from a combobox, and then run the following:
CODE:
Obviously WKID and PROCESS are the variables it will be pulling from the data that was put in by the user. That code was just in a simple batch file that I made with 2 variables. I am wanting to pull those 2 variables in when clicking the "kill process" button, it will run a command simliar to the above and end a process on a remote networked computer.
View 1 Replies
ADVERTISEMENT
Jan 8, 2012
I have a small project which I want to add a different text at the beginning and the ending of each line in a multiline text box.I've tried this, But It only let me to add it at the beginning ( because I don't know the length of each line And also I have to write a code for each line which is very hard because the text box may contains 200 lines Dim lines() As String = TextBox1.Lines lines(0) = lines(0).Insert(0, "Hello World")TextBox1.Lines = lines I want for all lines without having to repeat it again for each line
View 7 Replies
Feb 11, 2012
I have a form with a combobox and a textbox. The combobox is used to select a username and the textbox displays the staff No. I use the following code to populate the combobox.Private Sub DeleteUser_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
[Code]...
View 3 Replies
Jun 22, 2010
I have a VB form with 2 comboboxes and a textbox in which a user can type into.I would like my mouse cursor to move from my 2nd combobox selection directly over to the textbox that I have on a VB form.2nd comboboxe name: "CodeComboBox"Textbox name where I would like my cursor to move to after the selection:"USDOTNumtxt"I use the TextBoxName.Focus() in the SelectedIndexChanged but it doesn't function.
Here is my whole code:
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
[code].....
View 1 Replies
Apr 27, 2010
I have a form, frm1 w/a combobox, cboLocations, which is being populated using a sql string. There is also a frm2 w/a series of textboxes and other comboboxes. I want it so that once a selection is made from cboLocations, the textboxes and comboboxes on frm 2 are populated with the corresponding data. Here is what I have so far:
frm1:
Public Class frmLocations
Dim conn As New SqlConnection("Data Source=f03d3s-dev01; Initial Catalog=dos_track;User Id=vbuser; Password=tran3;")
Dim depot_refnbr As Integer
Private Sub frmLocation_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
conn.Open()
[Code] .....
What's happening right now is that I make a selection from cboLocations on frm1 and click on the OK button, frm2 loads, but none of the textboxes are populating and one of the comboboxes, cboDepot, shows the different data when you click on the down arrow, but it's not displaying anything it its text field when frm2 loads.
View 14 Replies
Nov 29, 2011
Visual Basic 2010 Express: I have a form with a combobox that is populated with the names of locations from a datagrid which in turn was imported at run-time (Form_Load) from an Excel database. The Excel database (and the datagrid) also stores the information for addresses and phone numbers for their respective locations.
What I would like to do is have the phone number and address text boxes automatically be updated with the proper corresponding data when the user selects a location from the combobox. Whether the text boxes are updated from the datagrid or Excel database is not a concern; I'm mainly looking for whichever way is simpler.
View 3 Replies
Aug 19, 2011
I have a combobox on a form with the dropdownstyle set to drop down. Users can either salect a value from the list, or type in any value they wish. This all works fine. However, when one particular item in the list is selected I wish to set a different value. Unfortunately I don't appear to be able to set the combobox Text property from within any of the events that fire when the selected item is changed.
[Code]...
View 6 Replies
Jun 7, 2011
Is it possible to get a list of running application in a remote pc through wireless or wired network?? i tried this code but i get an error
Dim ps As System.Diagnostics.Process
For Each ps In System.Diagnostics.Process.GetProcesses(remote_pc_name)
ListBox1.Items.Add(ps.ToString)
[code].....
View 2 Replies
Feb 7, 2009
i wan to display the text from combobox into the textbox and clear the combobox text when click on the button.But when i select another text from the combobox and click the button, the textbox display and overwrite the previous text.How can i do so that when click, textbox display text from combobox and clear combobox text. Then click again, display the new text at 2nd line of the textbox without deleting the previous text?
View 5 Replies
Jun 4, 2010
I have a program that needs to display a playlist of songs, for a band performing someplace, from a .txt file. The songs in the file are listed as follows:
All You Need is Love-Beatles
Rock
4.25
[code]....
The first line is the song's title and group name. The second is the songs genre. The third line is the songs length, 4.25 is 4 minutes and 25 seconds.upon clicking a button, I need to display a playlist from this .txt file based on the number of minutes the band has to play, minutes entered into a TextBox, and the songs genre, selected from a ComboBox. The songs cannot repeat and must be random.I have already coded the program to read the .txt file but have not clue where to start with the rest.
View 5 Replies
Mar 18, 2008
How Do I show the values from the dataset to the text box based on the selection from the combobox list i already populated the combobox my code is. [code]
View 3 Replies
Jan 4, 2011
Make a code to view the processes that are running to a remote computer and how to kill them by select one...
View 6 Replies
Feb 17, 2012
I am a new member here and a new user of VB.Net.So, I would like to know how to make an application that can control the processes and the services in a remote machine.
View 4 Replies
Feb 20, 2012
I have a tab control application, each tab loads a particular user control and each of those user controls will then add other user controls that are used amongst other the user controls. For example, I have an "ucQuotes" page and an "ucInventory" page, when the specific tab is selected, the "uc****" user control is loaded on that page, and in the case of "ucQuotes" and "ucInventory" they both use a control called "ucPartNumber"; a user control consisting of a combobox, textbox, and button. I have no issues reusing the shared user controls, in this case. My problem arises with my "ucQuickPrice" control, as it is always present at the bottom of the tab control form (separate from the tabcontrol, but on the same form), and it too uses ucPartnumber.
Here's my issue, as I type into the ucPartnumber combobox, the text I type does not appear in the combobox, it appears in the textbox of the ucPartnumber control that is being used on the tabcontrol page. There are no shared instances of ucPartNumber, nor do I have this issue between typing on one tab page and the text showing on the user control of another tab page.I tried just creating the ucPartNumber controls on the ucQuickPrice control, not adding a new instance of ucPartnumber on the .Load event, and the issue persists.
The combobox(s) in question are bound programmatically with about 40,000 items, ".datasource = dataset.tablename" not to a bindingsource. Autocomplete is set to none, I added code to utilize tool tips and the basic combobox filtering functionality. Is this a bug, or is there something I'm neglecting? I'm about 95% complete with this application, and this just happened today. I made the decision, to just reuse the ucPartNumber control on the ucQuickPrice control (originallly it's size and orientation would not fit, but I added some coding to detect what parent is adding ucPartNumber and to change its appearance accordingly). Before, I made this change, I did not have this problem. And, in trying to go back to how I had things set up before the change, the problem will not go away. if the whole control within a control verbage I used is a bit confusing, let me know and I'll try to better explain what is happening. At this point, I'm going to close and reopen vbexpress, as when I started this ordeal, vb started acting weird and wanted me to save all my work, it usually does this before locking up.
View 2 Replies
Dec 15, 2011
I have a DGV I am working on, and I have many columns.
For example I have Columns colcase(Combobox), colreportTime(Time)
the combox shows 4 cases {A,B,C,D}
what I need to do is if the user select "C"
the the colreporttime will show the time of this change unless the old value is C
View 9 Replies
Sep 30, 2011
I have a text box with some text inside it;
the text is long (say 100 chars);
the textbox can display about 20 chars.
The following code:
tbxTest.SelectionStart = 5
tbxTest.SelectionLength = 60
selects a part of the text and sets the cursor (blinking beam) at the and of the selection, in this case the first caracters of the selected text is out of the user sight because the textbox is too small to display the entire selection.
Is it possible to force the cursor to be at the beginning of the selection so the first part of the text is visible? (as if I had selected my text with the mouse dragging from the end back towards the beginning)
View 7 Replies
Mar 27, 2011
Is there a way to update source combobox to printer combobox selection?So going from printer1 to printer2 the source will update according to what that printer has to offer.
View 8 Replies
Jan 22, 2010
i have 2 forms.in form1: i have 1 combobox in form2: i have 1 textbox and 1 button...I want to make in form2 when i enter some text in the textbox and press the button the text to be added in form1 combobox
View 2 Replies
Feb 22, 2012
I'm having a problem with combo boxes. I usually use Java and it's been awhile since I used VB but I never remember having this much difficulty.My application is using an SDF file. From Data Sources, I drag the details on one of my Tables to my Form to get all of the fields. Three of them are comboboxes. Each of the three is an INT64 and each corresponds to a primary key in a different table. I click the tasks button on a combobox and for data source I select the appropriate table that has the data to go with the combobox, for display member I select the field that I want users to see, and for value member I select the primary key. Then I run a quick test and start the app, open the form, and add a new record. When I select a value from the combobox the selection won't validate because it doesn't think it's an INT64 like it should be. It seems to be using the display member as the actual value instead because if I change display member to the primary everything works great.
View 11 Replies
Jan 15, 2012
I have two comboBoxes, one is CountryCombo and second is StateCombo.What I want is the that when i the clicks country combo and select a one country then the States of that the country should get populated in the State Combo.I have tried things many many many but nothing working. Below is my code of how my CountryCombo is getting filled.
query="select CountryName from CountryMaster"
if dr.hasRows()
{[code]......
View 3 Replies
Dec 22, 2011
I am making a webbrowser and it has a history listbox(so it is always changing). I would like it so that if you double click on a listbox item or click on button5, axwebbrowser1 will goto the selected item, then the history form will close. [code]
View 16 Replies
Jun 6, 2011
it was regarding in vb.net text operations, i want to replace the text by finding some particular text.but the problem arises when the starting and the at the end delimiter of the string is something same every-time but middle thing keeps on changing so how can i work out with that?? str = Replace(str, "abcdparameter = xyz123;", "abcdarameter = my defined parameter;")
i tried to learn some regular expressions but i am not able to get that.the xyz 123 is same every-time....and also there is one delimiter at the end of the parameter string so anyhow you can select the whole line and replace it.
View 2 Replies
Nov 16, 2009
I have 2 comboboxes that I would like to change the selected row to a text from another textbox. Basically..
textbox1.text = "item 1"
combobox1.selecteditem = textbox1.text
When I do the above, my combobox is not changing the selected item, do I have to do something different?
View 9 Replies
Jan 1, 2012
I currently have a form with two comboxes. The first cbo is being populated with a project number, which is being pulled from the first column of a spreadsheet. I now want the second cbo to read the first cbo and then find that project number on the spreadsheet; when it finds that project number, I then need it to copy data from the row the project number is on. I have converted to vb from vba. Below is the code I used in vba (which obviously does not work). I only need certain cells from the project row.
Dim proj_num, rng As Range
Dim data, i As Long, j As Long
With Sheet1
[code].....
View 20 Replies
May 10, 2009
Again a little (for me) tricky thing:Supose you have a ComboBox control with predefined values - to keep it simple, let's add some colors:
- Blue
- Green
- Red
- Yellow
Now you have a TextBox control as well. If you type into the TextBox BLUE (non-key sensitive) I would like to make it recognize that this value already exists. It does not have to do anything else except for notifying me about a match.I do think that the TextBox1.KeyPress or TextBox1.TextChanged event is what I need but I have no idea how to compare to the ComboBox1 items. I've tried to create an Array of my ComboBox1.Items but didn't get much more than errors. Can anybody help? I am sure it is quite simple however, I can't get my mind set to go in the right direction
View 2 Replies
Feb 20, 2011
I am not sure I am even asking this question correctly, but what I am looking to do is re-center a google map based on an address obviously. I currently have a map that displays one property and six nearby other propertys the center is based on the one property. I want to give the user the choice of re-centering the map based on one of the six nearby propertys whose address is stored in a textbox.
[Code]...
View 3 Replies
Feb 6, 2011
Is it possible to load the content of a text file (.txt) into a listbox or combobox if the text file is located in a webpage?let's suppose that the file is located at url...how would i load the content of the text file into my listbox/combobox?
View 15 Replies
Aug 15, 2011
i have used the following code to populate a DataGrid based on the contents of a textbox. the users searches for a name which is populated into a combobox based on the name in the combobox several textboxes are populated with data based on the data in one of these text boxes Private bindingSource1 As New BindingSource
[Code]...
View 9 Replies
Jan 28, 2012
I have put all of the items from my Database into a Checkbox Selection, I now want to take the selection that the user makes from the checkbox and turn that into a string that I can then COMPARE through antoehr table.[code]...
View 7 Replies
Mar 26, 2009
Load a combobox with a selection from another?[code]....
View 2 Replies
